Simple PCIe FMC carrier 7 (SPEC7)
Project description
The FMC PCIe Carrier is an FMC carrier that can hold one FMC card and an SFP connector. This board is optimised for cost and is usable with most of the FMC cards designed within the OHR project (e.g. ADC cards, Fine Delay).
The SPEC7 is the follow-up of the
SPEC of which the design
started in 2010 and for which certain components are obsolete.
Boards with a very similar architecture are available for the VME bus
(SVEC - Simple VME FMC Carrier
(SVEC)) and for the PXI
Express bus (SPEXI - Simple PXI express FMC Carrier Board
(SPEXI)).
Other FMC projects and the FMC standard are described in FMC
Projects.
Main Features - Under discussion
- Specification gathering discussion - a list of wish items ...
- Feature Alternatives - boiling down to a few alternatives ...
- Design specification - to a precise specification that allows the design to start
Project information
- Official production documentation
- Users
- Frequently Asked Questions
Releases
Contacts
Commercial producers
General questions about project
- Erik van der Bij - CERN
Status
Date | Event |
10-01-2018 | Start working on project. Collecting main specifications. |
12-01-2018 | Main specifications collected. Discussion points documented. |
29-01-2018 | Specifications taking shape: Specification gathering discussion - a list of wish items & Feature Alternatives - boiling down to a few alternatives |
07-03-2018 | Specification gathering discussion and Feature Alternatives stabelised. |
11-05-2018 | Specification reviewed by Sundance. |
18-05-2018 | Design specification clarified at 2-day visit from NIKHEF at CERN. |
25 May 2018