- 03 Jun, 2022 2 commits
-
-
Grzegorz Daniluk authored
-
Grzegorz Daniluk authored
-
- 31 May, 2022 1 commit
-
-
Adam Wujek authored
For main_fw and bootloader Signed-off-by:Adam Wujek <dev_public@wujek.eu>
-
- 23 May, 2022 16 commits
-
-
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
Add "/" to make it similar to the main_fw value Signed-off-by: -
Adam Wujek authored
Chnging unused settings. Making setting to be similar to main_fw. Signed-off-by: -
Adam Wujek authored
If enabled there is wrong data returned via i2c, like: $ i2cdump -y 9 0x12 s 0x9a 0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef 00: 22 44 88 49 92 4f 9e 54 a8 20 40 4d 9a 6f de 6e "D?I?O?T? @M?o?n 10: dc Signed-off-by: -
Adam Wujek authored
Clocks (even these not used) are changed to be very similar to main_fw Signed-off-by: -
Adam Wujek authored
Clock is chaned to 8MHz for i2c to be the same as in main_fw Signed-off-by: -
Adam Wujek authored
Clock is chaned to 24MHz to be the same as in main_fw The real fix is the use of the internal oscillator Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
Without this Linux driver reports that the currently set fan speed is 0. Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
Signed-off-by:
-
- 03 May, 2022 4 commits
-
-
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
According to PMBUS v1.3.1 part II specification the used prefix 0xff for extended commands is reserved for future use: "The PMBUS_COMMAND_EXT is reserved for future use to extend the PMBus command set beyond the available 256 command codes." As an alternative the standard points the MFR_SPECIFIC_COMMAND_EXT to be available with 0xFE as the first byte of a command. The same standard also points that standard commands from 0xc4 can be defined by a manufacturer. To be compliant with the standard and to simplify the design I have decided to move all used extended command to the standard range. Be aware that this brings some non-backward compatible changes. Changes include: - main FW - bootloader - test_master - documentation Signed-off-by:
-
- 15 Apr, 2022 16 commits
-
-
Adam Wujek authored
These coefficients has to be fixed, there are just values to export values other than 0 Signed-off-by: -
Adam Wujek authored
To be called at the read of FAN_COMMAND_n. For some reason it fixes random restarts after the write of FAN_COMMAND_n. Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
STATUS_BYTE is read only, STATUS_CML is R/W, can be cleared on write with selected bits Signed-off-by: -
Adam Wujek authored
also: - merge cmd_data_lengths and ext_cmd_data_lengths - sort commands (main_fw) - align columns in cmds_cmds arrays Signed-off-by: -
Adam Wujek authored
The size of a string is passed as a first byte Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
i2cdump tires to dump the data at the address 0xff. By Monimod it was recognized as an incomplete extended command. The Monimod coulnd't recover. Finally, after the timeout the watchdog was triggering the reset. Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
This reverts commit 9e119357.
-
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
Signed-off-by:
-
- 11 Apr, 2022 1 commit
-
-
Grzegorz Daniluk authored
-
