E.g. Kintex-7

Based on Peter's work for km2net CLB board.

Reason: h_y was close to the DAC range, on some boards we were unable to lock
HPLL.
In addition to HPLL modifications, also the phase shifting had to be changed.
When offset clock has lower frequency than the ref clock, shifting ref
clock produces sampled clock which is shifted in another direction.

The function ptpd_netif_create_socket() still receives two arguments,
because it is being called by ppsi, and I'd better not change the API
in small steps in there.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

y

The function wrpc_get_port_state() still receives two arguments, because
it is being called by ppsi, and I'd better not change the API in small
steps in there.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

The function are not there:

 * ptpd_netif_poll()
      it never existed

 * ptpd_netif_select()
      nobody called it, and it only returned 0

 * ptpd_netif_locking_enable()
 * ptpd_netif_locking_disable()
 * ptpd_netif_locking_poll()
 * ptpd_netif_adjust_counters()
 * ptpd_netif_adjust_phase()
 * ptpd_netif_adjust_in_progress()
 * ptpd_netif_enable_timing_output()
 * ptpd_netif_enable_phase_tracking()
 * ptpd_netif_read_calibration_data()
      they were part of ptp-noposix-wrappers.c, removed in January 2015.
      The features are now part of the wr_ops in ppsi.

 * ptpd_netif_get_ifName()
      same (ptp-noposix-wrappers.c), it returned a constant name, and
      ppsi does it differently because based on arch-wrs/arch-wrpc

 * ptpd_netif_calibrating_enable()
 * ptpd_netif_calibrating_disable()
 * ptpd_netif_extsrc_detection()
      same, but in addition they were already doing nothing when removed

 * ptpd_netif_calibrating_poll()
 * ptpd_netif_calibration_pattern_enable()
 * ptpd_netif_calibration_pattern_disable()
      same, but they wer not actually used since calibration was gone
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This time I added -Wmissing-prototypes and fixed accordingly. Again, this
used to be part of -Wall and I'm disgusted by it not being so any more.

What does "all" mean, then?
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

I added -Wstrict-prototypes, that used to be included in -Wall settings
but is not.  Actually, I think it should be an error to not specify an
argument list by now.  If any, -traditional is there for old timers.

Fortunately no bug was exposed by the missing prototypes.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Yesterday I was eventually fussed up by the need to "make clean" every
time. So here's a stupid depend rule, not perfect but better than
nothing.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This adds two commands: devemem (to read and write registers/RAM)
and delays (to read and change the constant delays.  The commands are
only available for CONFIG_DEVELOPER builds.

The default delays were just wrong, they are valid of an older
gateware version.  Using 0, it is clearer to the user that the right
value is missing (if the SFP database is populated, the right value
applies anyways).
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Otherwise we have a race condition with wr_date setting initial time on the
switch.

in ppsi:
--update hal_shmem to version 7
--add tx and rx packet counters
--add error counters for SNMP
--increase ppsi shmem version to 6
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

remove waiting state, make waiting flag instead
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Add checking stack overflow and detecting reset to wrs. Code common for wrpc
and wrs is placed in system_checks.c and .h. Work is based on following
commits in wrc_main.c:
1704a668 main: check for stack overflow
7836c39e Optionally detect reset and print a stack trace

Additionally:
--update Kconfig to have a possibility to select CHECK_RESET also for switch,
  not only for node as before
--and _endram to ram-wrs.ld

When "stack overflow" occurs then message is printed once every second.
When reset occours then LM32 will print stack trace and reset once more.
NOTE: I couldn't get spll to work after reset, for sure problem is in
      ad9516 init function, but not only there.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

--increase spll_stats structure version to 2
--add to spll_stats structure:
  - commit_id
  - build_date
  - build_time
  - start_cnt (to be used later for start counter)
--move declaration of spll_stats structure from wrs_main.c to revision.c
--pass git version and author at compile time to revision.c
--create revision.h with build_* externs
--update version reporting at cpu start
--update version command
--include section .stats in section .data for node
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Do not report to monitor oscilations between state WR_WAIT_SYNC_IDLE and
TRACK_PHASE. Real problem will be fixed later.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Needed since ppsi moved to shmem and removed cur_servo_state structure from
servo.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

ppsi for wrs requres locks in shmem when shmem is changing. Since servo is
shared between wrs and wrpc fixes had to be implemented.
Since there is no shmem in wrpc, dummy function for locking had to be added.
As a side effect include/libwr/shmem.h was added.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

pass of header cleanup from wrs
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Done as a part of work to move hal to shm in wrs.

Done in this commit:
--use wrpc_get_port_state instead of halexp_get_port_state
--make wrpc_get_port_state fill hal_port_state structure in the way how HAL
  fills shmem.
--update lib/net.c to use struct hal_port_state instead of hexp_port_state_t
--update monitor/monitor_ppsi.c to use struct hal_port_state instead of
  hexp_port_state_t
--update ppsi to get needed changes
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Files needed to get rid of halexp_get_port_state.
Done during process of moving HAL to shm in wrs.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

It is not used anymore.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Update include/hal_exports.h to latest version
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

This is useful for example when using a secondary onewire controller.

This reverts commit 7e2ee9b4.

You can't put a bitstream into the middle of a tiny EEPROM.
If you intend to build an sdbfs for a switch, make a new image.