Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This removes the hack of forking a child, because I'll need to do more
than just passing a file name. The other tool using the same hack
(load-virtex) is unchanged as I don't need to work on it.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

You can "diff -w" or "show -w" and see there is no difference. I
didn't shorten long lines nor anything "major", I just removed
trailing spaces, that are highlighted in my editor, and fixed
inconsistencies in indentation within functions.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This adds two documents of mine (with greg's additions) that are
considered useful for developers.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Without this fix all 802.1q tagged frames are assigned to class 0

Built from commit 6194dc7 of wrpc-sw.

We also provide them each time with the release binaries available on OHWR.

Requires updated HDL as well.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This reverts commit 38e59051.

We don't need the sdram printouts any more. But it's good to
have this in history anyways (it was an error having it in master,
but all hackers promote bugs as features).

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

With mem=64M we have some sdram corruption, with "bad page state".
This is unexplained, and the sam-ba code is so difficult to fix, that
we'd better just install with 32M of sdram.  At runtime we use a fixed
at91boot, so 64M work properly.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This actually has no effect, but since the item is there, we'd better
have it correct.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

also fixes a typo, not exposed unless you use -m ddr
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

The snmpwalk client has a bug in returning 64-bit values.
This redoes what we are already doing in wrsPpsi.c.  It's bad,
but mandatory at this point.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This adds an snmp stanza with the white rabbit date.
However, it has 64-bit problems (it's the client, not the server).
See next commit.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

The name was inconsistent with anything else, and we must simplify
and get consistent.

A symlink with the old name is provided.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This is similar to the kernel patch, but its impact is less
important: barebox is only reading nand in our setup, and it looks
like it never failed (on the other hand, the times were definitely out
of specifications).
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

We used the timing from the g45ek, but ours is slower. Actually, ours
is slower only in 16-bit mode, and has the same timing when used in
8-bit mode.

Our timing setup was outside of the allowed specification, and resulted
in random and unreproducible failures.  The "visible" effect is
that reading 100MB takes 13.4s instead of 11.4s, measured with:

  time dd bs=1k count=102400 < /dev/mtd1 > /dev/null

You can try another, still slower, setup just by hand, like this
(in this order):

   devmem 0xffffe83c w 0x00051003
   devmem 0xffffe838 w 0x000f000f
   devmem 0xffffe830 w 0x04060406

but the current settings (41003, 000c000c, 02040204) are alread within
specification.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Ports info (header) was updated only in index.php. Now it is refreshed
every 15 seconds.

- Reference to advanced menu was not working properly after accessing
firmware.php and load.php (fixed)
- Global switch description in index.php output format for wr_date
- Adding 1 second delay for reboot
- Loading FPGA/lm32 bin now displays a warning message