This is done by adding a generic to the entity, which is connected directly to
the gc_fsm_watchdog component instantiated within the wb_i2c_bridge. The user
should calculate the appropriate watchdog timeout value and set it via this
generic.

The instantiation template in the wishbone_pkg is also updated.

Signed-off-by: Theodor Stana <t.stana@cern.ch>

Theodor-Adrian Stana authored 11 years ago and Tomasz Wlostowski committed 11 years ago

To make the design more modular, moved the synchronization chain out of
the gc_glitch_filt component. Made the necessary changes in the
components using the gc_glitch_filt.

Also added gc_glitch_filt documentation.

Signed-off-by: Theodor Stana <t.stana@cern.ch>

Theodor-Adrian Stana authored 11 years ago and Tomasz Wlostowski committed 11 years ago

Signed-off-by: Theodor Stana <t.stana@cern.ch>

Grzegorz Daniluk authored 11 years ago and Tomasz Wlostowski committed 11 years ago

Xilinx defines almost full threshold not as the used words in the FIFO but as
number of available empty words (UG363 - Virtex 6 FPGA Memory Resources

Theodor-Adrian Stana authored 11 years ago and Tomasz Wlostowski committed 11 years ago

Also updated the rest of the documentation file to have a pretty
regmap.

Signed-off-by: Theodor Stana <t.stana@cern.ch>

Theodor-Adrian Stana authored 11 years ago and Tomasz Wlostowski committed 11 years ago

Bridge: Removed "redundant" SIM_WB_TRANSFER state.

Slave: Removed redundant ADDR_CHECK state and moved its code to
the ADDR state.

Also corrected a bug whereby the ack_i pin was not being checked within
the ADDR_ACK state. This was causing the FSM to advance even thogh the
slave was actually NACK-ing.

DOC: Updated documentation for both these modules

Signed-off-by: Theodor Stana <t.stana@cern.ch>

Theodor-Adrian Stana authored 11 years ago and Tomasz Wlostowski committed 11 years ago

Signed-off-by: Theodor Stana <t.stana@cern.ch>
Signed-off-by: Tomasz Włostowski <tomasz.wlostowski@cern.ch>

Theodor-Adrian Stana authored 11 years ago and Tomasz Wlostowski committed 11 years ago

Signed-off-by: Theodor Stana <t.stana@cern.ch>
Signed-off-by: Tomasz Włostowski <tomasz.wlostowski@cern.ch>

Theodor-Adrian Stana authored 11 years ago and Tomasz Wlostowski committed 11 years ago

- I2C slave component now samples SDA line one rising SCL and changes
states and shifts out bits on its falling edge
- I2C slave component has clearer status outputs
- bridge component changed to reflect changes in I2C slave interface
- bridge component also returns to IDLE state on I2C stop condition, as
reflected by the I2C slave

Signed-off-by: Theodor Stana <t.stana@cern.ch>
Signed-off-by: Tomasz Włostowski <tomasz.wlostowski@cern.ch>

Theodor-Adrian Stana authored 11 years ago and Tomasz Wlostowski committed 11 years ago

- an FSM watchdog component was added to the multiboot_fsm; the timeout of
the wathcdog is reflected in the component's status register
- multiboot_regs was wbgen-ized
- updated wb_xil_multiboot top-level to reflect new changes

Signed-off-by: Theodor Stana <t.stana@cern.ch>
Signed-off-by: Tomasz Włostowski <tomasz.wlostowski@cern.ch>

Theodor-Adrian Stana authored 11 years ago and Tomasz Wlostowski committed 11 years ago

Signed-off-by: Theodor Stana <t.stana@cern.ch>
Signed-off-by: Tomasz Włostowski <tomasz.wlostowski@cern.ch>

Theodor-Adrian Stana authored 11 years ago and Tomasz Wlostowski committed 11 years ago

Signed-off-by: Theodor Stana <t.stana@cern.ch>
Signed-off-by: Tomasz Włostowski <tomasz.wlostowski@cern.ch>

Theodor-Adrian Stana authored 11 years ago and Tomasz Wlostowski committed 11 years ago

- gc_i2c_slave     -- generic I2C slave to be used with a processor or tied to a
                      Wishbone interface
- gc_glitch_filter -- glitch filter with selectable number of taps
- wb_i2c_bridge    -- I2C bridge implementing the protocol defined with ELMA
                      for monitoring VME crates
- wb_xil_multiboot -- module that accesses the Spartan-6 configuration logic
                      for reconfiguring the FPGA using MultiBoot

Doc files for each of these modules can be found in the doc/ folder.

Signed-off-by: Theodor Stana <t.stana@cern.ch>
Signed-off-by: Tomasz Włostowski <tomasz.wlostowski@cern.ch>

	removed auto id from irqm_core
        TODO: fix auto IDs for wb_irq_master

Changes to the TCL scripts were needed.
To simplify future changes, the work was handed off to a shared function.

Replaced by a function taking the number of bits in parameter and returning a vector.

c_status_time was one cycle longer than it should be!
this led to the arria5 requiring g_dummy_time-1 in c_vstatus_data
==> after fixing: must increase g_input_to_output_cycles on arria5

there was also a wrong calculation for s_wip with single-lane mode
it was working also by luck because WEL and WIP are usually set
together and are side-by-side, thus masking the c_status_time bug.

For whatever reason, some flash chips don't have the correct number
of dummy cycles in their non-volatile flash by default. This patch
forces these devices to the generic-specified value.