Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

- Move subsections "Autonegotiation of extension" and "BMCA configuration"
  to the section "TIming COnfiguration"
- Rename "Other Deployments" to "Fiber parameter matching"

The part of the document that describes each configuration item
(chapter "Configuration of the Device") is separated from the
part that describes more in details behavior of the device,
give more info about the configuration itself, the relations
between items, etc. It is now in the chapter "Operation of the
Device".

NOTE: I tried to take the content of Apendix B on time and
frequency sources and inject it in this chapter under "Time
and frequency sources of Grandmaster" but the result required
too many levels of embedded sub-sections (not supported) and
IMHO it is important that one can find reference to this info
direclty in the index page.

[DOC #362] doc/wrs-user-manual: tx_phase_cal.conf, NTP multi-source, IP in UDP, NTP description, NMEA, IRIG

- Number ports as 01-12 in /wr/etc/tx_phase_cal.conf -> Maciej
- assignment of IP address for L3 ptp -> Maciej
- added description of NTP
- updates to IRIG-B and NMEA

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Adam Wujek based on Harvey Leicester's description.

[DOC #362] doc/wrs-user-manual: Add to list of new features by v8.0 and start documenting time and freq sources

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Before fix it was disabling LLDP completely when trying to disable LLDP
on management interface.

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Change the default value also in Kconfig

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

It could happen that there were some leftovers from previous builds

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

If the checking period of HAL's shmem is the same as HAL's basic
period (1s), then it might happen that number of times check is done
when shmem is locked causing an application to fail.

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

To e.g. be able tl check help message if another instance is running.

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Add an option to partial overwrite of dot-config by values stored
locally in /update/permanent/dot-config/dot-config-overwrite.

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

With uRV/RISC-V as softCPU. It requires binaries/rt_cpu.elf binary to be for RISC-V.

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

From commit:
03fdde3b Merge branch 'wrpc-v5-wrs-v3' into wrpc-v5

NOTE: it requires bitstream with uRV (RISC-V)

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Before there was overflow in number of us.

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Also provide the patch to ntpd to ignore wrong ntp servers. Before ntpd
was exiting if wrong ntp server was provided as parameter.

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Extract only 8p_mb-LX240T.bin 18p_mb-LX240T.bin files

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>