Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Add an option to partial overwrite of dot-config by values stored
locally in /update/permanent/dot-config/dot-config-overwrite.

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

(no technical change)
Move:
-BR2_CONFIGFILE
-Compilation optimization
to "Build-time configuration" menu

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>
Signed-off-by: Harvey Leicester <harvey.macdonald.leicester@cern.ch>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>
Signed-off-by: Harvey Leicester <harvey.macdonald.leicester@cern.ch>

-When enabled the build of firmware fails on host with python>=3.12
 (e.g., ubuntu 24.04)
-These utilities are not needed
-These utilities are written in python (there is no python on WRS)

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Remove _VAL entries from Kconfig*. Replace with a syntax:
prompt "" if XXX

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

update wrsfl_release_defconfig
(Removed from the original commit) update tx_phase_cal.conf

[FEATURE: #317] WRS-FL: modify wrs_linux_defconfig and add driver file for USB-to-SFP management port

A kernel module file asix.ko and a tool ioctl will be generated.
After insmod the asix.ko, a new network interface, eth1, will be found.

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Disable web interface in the default config due to security
vulnerabilities described in CVE-2023-22577.

Please note that web interface can still be enabled manually in the
config file in runtime.

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Maciej Lipinski authored 4 years ago and Grzegorz Daniluk committed 4 years ago

changed from daemon.info to a new option default_syslog that
uses daemon.info as default and additionally parses syslog
messages for info about facility,priority and uses this info
if available.

Adam Wujek authored 5 years ago and Maciej Lipinski committed 5 years ago

This reduces the size of a firmware by 5MB.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Adam Wujek authored 5 years ago and Maciej Lipinski committed 5 years ago

Uplift util-linux to a version 2.28.2

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Revert part of a commit:
f14e28c9

 Setup default config for the switch (WR profile by default)

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

dropbear was replaced, because it does not support correctly LDAP+kerberos.

It was almost working. With LDAP+Kerberos over PAM dropbear was prompting once
more for a password when the correct was given.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>