The xilinx-generated DDR ip-cores do not use self-refresh (the 'enter self-refresh' signal is tied
to ground). This constraint as such is not needed and many times it creates issues because ISE will
remove the signal and then Translate step will fail because it cannot match the constraint to a
signal.

Resolve "Removing "svec_fmc_carrier" module results in OOPS"

Closes #9

See merge request be-cem-edl/fec/hardware-modules/svec!7

Resolve "copy relevant documentation from texi to sphinx"

Closes #4

See merge request be-cem-edl/fec/hardware-modules/svec!5

Signed-off-by: Federico Vaga <federico.vaga@cern.ch>

If the driver is not able to create "dbg_dir", the pointer should be set
as NULL and should not be left with some error-pointer.
Reported-by: Federico Vaga <federico.vaga@cern.ch>
Signed-off-by: Vaibhav Gupta <vaibhav.gupta@cern.ch>

Signed-off-by: Federico Vaga <federico.vaga@cern.ch>

Fix svec_base_regs.cheby to allow cheby to generate map in the rest
format.
Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Resolve "Review vaibhav changes"

Closes #6

See merge request be-cem-edl/fec/hardware-modules/svec!4

Signed-off-by: Vaibhav Gupta <vaibhav.gupta@cern.ch>

1- Header-files and Module.symvers from fpga-mgr-backport project should
   only be used for the FEC-OS based on 3.10.0-957.1.3.rt56.913.el7.x86_64
   CentOS kernel.

2- Module.symvers from fmc-sw project were included twice. Thus giving
   warning for duplication.
Signed-off-by: Vaibhav Gupta <vaibhav.gupta@cern.ch>

For FPGA re-programming, debugfs was used. For this purpose, the
corresponding function was making use of 'device_schedule_callback()'
which was removed in linux-v3.15 at commit:
	33ac1257ff0dee2e9c7f009b1c1914b7990217b2 ("sysfs, driver-core:
	remove unused {sysfs|device}_schedule_callback_owner()")

The similar and better functionality is provided by an sysfs-API
'device_remove_file_self()'. Thus, convert this procedure from debugfs to
sysfs.
Signed-off-by: Vaibhav Gupta <vaibhav.gupta@cern.ch>

The return type of 'debugfs_create_regset32()' was changed to 'void'
in linux-v5.6 at commit:
	ae91c92565494a37c30ce9a691c87890f800d826 ("debugfs: remove return
	value of debugfs_create_regset32()")
Signed-off-by: Vaibhav Gupta <vaibhav.gupta@cern.ch>

Variable name 'LINUX' is very ambiguous for its purpose in the makefile.
Also, this project builds as a part of COHT project which uses another
variable name 'KERNELSRC' for the same purpose. Hence, this change makes
this project uniform with others.
Signed-off-by: Vaibhav Gupta <vaibhav.gupta@cern.ch>

Signed-off-by: Vaibhav Gupta <vaibhav.gupta@cern.ch>

Resolve "Add CI support"

Closes #3

See merge request be-cem-edl/fec/hardware-modules/svec!3

Signed-off-by: Federico Vaga <federico.vaga@cern.ch>

Signed-off-by: Federico Vaga <federico.vaga@cern.ch>

Resolve "Document the CSR registers"

Closes #1

See merge request be-cem-edl/fec/hardware-modules/svec!2

Signed-off-by: Federico Vaga <federico.vaga@cern.ch>

Signed-off-by: Federico Vaga <federico.vaga@cern.ch>

Signed-off-by: Federico Vaga <federico.vaga@cern.ch>

Signed-off-by: Federico Vaga <federico.vaga@cern.ch>

Signed-off-by: Federico Vaga <federico.vaga@cern.ch>

Signed-off-by: Federico Vaga <federico.vaga@cern.ch>

Resolve "s/SPEC/SVEC -- doc/index.rst"

Closes #2

See merge request be-cem-edl/fec/hardware-modules/svec!1

This documentation is for SVEC project. By mistake it was mentioned as
SPEC.
Signed-off-by: Vaibhav Gupta <vaibhav.gupta@cern.ch>

Signed-off-by: Federico Vaga <federico.vaga@cern.ch>

this goes together with general-cores release v1.1.2
Signed-off-by: Federico Vaga <federico.vaga@cern.ch>

Signed-off-by: Federico Vaga <federico.vaga@cern.ch>

Signed-off-by: Federico Vaga <federico.vaga@cern.ch>

2.0.3 - 2021-03-22
==================
Fixed
-----
- sw: fix SVEC flasher size

Signed-off-by: Federico Vaga <federico.vaga@cern.ch>

Being stabic is no excuse for not looking twice, David :D.
Reported-by: Rene Geissler <R.Geissler@gsi.de>

Reported-by: Rene Geissler <R.Geissler@gsi.de>