Theodor-Adrian Stana authored 11 years ago and Tomasz Wlostowski committed 11 years ago

Bridge: Removed "redundant" SIM_WB_TRANSFER state.

Slave: Removed redundant ADDR_CHECK state and moved its code to
the ADDR state.

Also corrected a bug whereby the ack_i pin was not being checked within
the ADDR_ACK state. This was causing the FSM to advance even thogh the
slave was actually NACK-ing.

DOC: Updated documentation for both these modules

Signed-off-by: Theodor Stana <t.stana@cern.ch>

Theodor-Adrian Stana authored 11 years ago and Tomasz Wlostowski committed 11 years ago

Signed-off-by: Theodor Stana <t.stana@cern.ch>
Signed-off-by: Tomasz Włostowski <tomasz.wlostowski@cern.ch>

Theodor-Adrian Stana authored 11 years ago and Tomasz Wlostowski committed 11 years ago

Signed-off-by: Theodor Stana <t.stana@cern.ch>
Signed-off-by: Tomasz Włostowski <tomasz.wlostowski@cern.ch>

Theodor-Adrian Stana authored 11 years ago and Tomasz Wlostowski committed 11 years ago

- I2C slave component now samples SDA line one rising SCL and changes
states and shifts out bits on its falling edge
- I2C slave component has clearer status outputs
- bridge component changed to reflect changes in I2C slave interface
- bridge component also returns to IDLE state on I2C stop condition, as
reflected by the I2C slave

Signed-off-by: Theodor Stana <t.stana@cern.ch>
Signed-off-by: Tomasz Włostowski <tomasz.wlostowski@cern.ch>

Theodor-Adrian Stana authored 11 years ago and Tomasz Wlostowski committed 11 years ago

- an FSM watchdog component was added to the multiboot_fsm; the timeout of
the wathcdog is reflected in the component's status register
- multiboot_regs was wbgen-ized
- updated wb_xil_multiboot top-level to reflect new changes

Signed-off-by: Theodor Stana <t.stana@cern.ch>
Signed-off-by: Tomasz Włostowski <tomasz.wlostowski@cern.ch>

Theodor-Adrian Stana authored 11 years ago and Tomasz Wlostowski committed 11 years ago

Signed-off-by: Theodor Stana <t.stana@cern.ch>
Signed-off-by: Tomasz Włostowski <tomasz.wlostowski@cern.ch>

Theodor-Adrian Stana authored 11 years ago and Tomasz Wlostowski committed 11 years ago

Signed-off-by: Theodor Stana <t.stana@cern.ch>
Signed-off-by: Tomasz Włostowski <tomasz.wlostowski@cern.ch>

Theodor-Adrian Stana authored 11 years ago and Tomasz Wlostowski committed 11 years ago

- gc_i2c_slave     -- generic I2C slave to be used with a processor or tied to a
                      Wishbone interface
- gc_glitch_filter -- glitch filter with selectable number of taps
- wb_i2c_bridge    -- I2C bridge implementing the protocol defined with ELMA
                      for monitoring VME crates
- wb_xil_multiboot -- module that accesses the Spartan-6 configuration logic
                      for reconfiguring the FPGA using MultiBoot

Doc files for each of these modules can be found in the doc/ folder.

Signed-off-by: Theodor Stana <t.stana@cern.ch>
Signed-off-by: Tomasz Włostowski <tomasz.wlostowski@cern.ch>

	removed auto id from irqm_core
        TODO: fix auto IDs for wb_irq_master

Changes to the TCL scripts were needed.
To simplify future changes, the work was handed off to a shared function.

Replaced by a function taking the number of bits in parameter and returning a vector.

c_status_time was one cycle longer than it should be!
this led to the arria5 requiring g_dummy_time-1 in c_vstatus_data
==> after fixing: must increase g_input_to_output_cycles on arria5

there was also a wrong calculation for s_wip with single-lane mode
it was working also by luck because WEL and WIP are usually set
together and are side-by-side, thus masking the c_status_time bug.

For whatever reason, some flash chips don't have the correct number
of dummy cycles in their non-volatile flash by default. This patch
forces these devices to the generic-specified value.