|01-10-2009||Start working on project|
|25-10-2009||Functional specification written.|
|23-11-2009||Selection of components, waiting for schematic symbols.|
|02-12-2009||Work on the FmcAdc100M14b4ch_a is suspended, because estimated performance wasn't reached.|
|18-12-2009||Specification and schematic of new version has been added.|
|22-01-2010||FmcAdc100M14b4cha upgrade. Design revised and modified, better parameters expected.|
|10-02-2010||New design made with 3 input ranges and programmable offset.
Need to finalise local clock circuit before PCB layout can start.
|24-02-2010||Draft PCB layout done. Design document being written. Design review planned for 2 March.|
|02-03-2010||Design review of schematics done. fmc-adc-100m14b4cha-hw:V1Review|
|04-03-2010||Improvements made, responding to design review. fmc-adc-100m14b4cha-hw:V1ReviewImprov|
|19-03-2010||PCB review planned for 24 March 2010.|
|24-03-2010||Design review of PCB layout done. fmc-adc-100m14b4cha-hw:V1LayoutReview|
|25-03-2010||Small changes involved to the schematic (to make routing easier),
PCB partially updated.
|29-03-2010||PCB updated. Waiting for Design Office's review.|
|06-04-2010||12 PCBs ordered. 3 will be mounted for prototyping.|
|12-04-2010||For availability reasons two resistor values need to be modified (120
|06-05-2010||3 cards assembled, SMC connectors ordered but not yet available.|
|28-05-2010||SMC connectors given to workshop. Boards look really nice.|
|09-06-2010||3 assembled boards received.|
|12-07-2010||One board plugged in on Xilinx development kit and powered. Debugging start.|
|13-07-2010||Two channels working! Limited by Xilinx development kit clock connections.|
|30-07-2010||Current consumption has been measured, document is now available on the wiki.|
|30-07-2010||Changes for the second version of the PCB documented, mainly to solve thermal problems with regulators.
Required change of DC/DC converter and inductor.
|30-07-2010||ENOB & SNR measured: >11 bits in all ranges.|
|03-08-2010||First harmonic distortion measurements made. Needs further investigation as with -60dB is higher than expected.|
|03-09-2010||The distortion source has been found.
For further information go to Investigating the distortion source...
|03-09-2010||Thermal stability measurements made.|
|03-09-2010||Frequency response of the anti-aliasing filter will be verified and possibly corrected.
Needs development of software that shows frequency response.
|07-09-2010||Both I2C buses are working. Accessing memory, setting the sampling frequency and
making temperature measurements are now possible.
|08-09-2010||Issue with linearity in the 30-90 kHz region caused by offset compensation circuit being investigated.|
|20-09-2010||The schematic has been updated. All the differences for the second version are given here :PDF|
|29-09-2010||Updates to PCB made (EDA-02063-V2). Ten boards ordered. Designer left CERN.|
|22-10-2010||Found inconsistencies in BOM. Requires modifications to schematics and production files.|
|08-12-2010||Production of ten boards of V2 will arrive before
|07-01-2011||Ten V2 boards arrived.|
|23-02-2011||First board powered up on a SPEC carrier, no smoke!|
|03-03-2011||Trial of wave soldering of LEMO connector instead of SMC looks OK.
PCB redesign needed if want to use wave soldering.
|08-03-2011||Basic HDL code written (single shot, no time stamps). Needs testing.|
|28-03-2011||Basic HDL code tested. We're able to DMA raw adc data from DDR3 memory to the host and gnuplot them.|
|21-06-2011||Made schematics and layout modifications for V3 (see [[fmc-adc-100m14b4cha-hw:V3ChangeLog|
|22-06-2011||Project sent to DEM for front panel modification and production file generation. Ready on 24-06-2011.|
|27-06-2011||V3 ready for review.|
|04-07-2011||V3 reviewed. [[fmc-adc-100m14b4cha-hw:V3Review|
|01-08-2011||Price Enquiry sent out for first Open Hardware production.|
|12-08-2011||Firmware being finalised. Made re-usable for use in the fmc-adc-100k16b8cha":https://www.ohwr.org/project/fmc-adc-100k16b8cha, a slower ADC mezzanine.|
|18-08-2011||Design of a tester board.|
|30-08-2011||Production test software being written.|
|12-09-2011||Price Enquiry finished. Received replies from several companies. Order for 40 cards being made.|
|15-09-2011||V4 design made. Corrected some textual problems and one BOM item order number.|
|20-09-2011||Order for 40 cards placed with INCAA Computers (V5). Delivery in January 2012.|
|10-10-2011||Useful feedback from INCAA Computers made us improve the design as V5.|
|02-12-2011||Firmware getting stable. Demo oscilloscope program in Python written.|
|20-12-2011||Measured bandwidth is 30 MHz. 40 MHz bandwidth is possible by changing 2 capacitors per channel.|
|10-01-2012||Expect delivery of 40 cards
|04-04-2012||First production received: 40 V5 cards produced by INCAA Computers.|
|05-02-2013||Firmware development on-going. In parallel a driver is being written. Expect a release in April 2013|
|12-03-2013||Release 1.0 of the fmc-adc gateware for SPEC is available.|
|28-03-2013||Release 1.1 of the fmc-adc gateware for SPEC is available.|
|19-07-2013||Firmware ported to work on the SVEC VME carrier.|
|29-07-2013||Release 2.0 of the fmc-adc gateware for SPEC is available.|
|29-07-2013||Release 1.0 of the fmc-adc gateware for SVEC is available.|
|17-01-2014||Release 3.0 of the fmc-adc gateware for SPEC and SVEC is available.|
|24-03-2014||Cards deployed in CERN's accelerator complex. Start of development to deployement: 4.5 year.|
|22-04-2014||CERN ordered 100 boards (V5-0) for delivery by 18/7/14 (20) and 19/9/14 (80).|
|18-07-2014||Received 20 pre-series boards.|
|07-09-2015||Over 40 installed in CERN's accelerator complex.|
Erik van der Bij - 21 July 2014