Explore GitLab

Discover projects, groups and snippets. Share your projects with others


  • Projects / 1-to-8 Pulse and Frequency Distribution Amplifier

    High performance pulse and frequency distribution amplifier for time and frequency metrology. The pulse distribution board is an 1:8-channel (1 Hz and up) logic-level distribution amplifier, while the frequency distribution board is an 1:8-channel sine-wave (1-30 MHz) distribution amplifier. Two 1:8 boards fit side-by-sides in a 1U 19" rack enclosure, with either BNC or SMA connectors.

    For more information, see the wiki

    0
    updated
  • Projects / 3.3V adapter for SVEC

    A small PCB that generates 3.3 Volt so that a SVEC can work in older type of VME crates. The SVEC is a VME64x board where usually the 3.3 Volt supply is delivered by the crate itself. Older VME types do not generate this 3.3 Volt.

    0
    updated
  • Projects / 3DMASK - 3D printed mask

    This open-source 3DMASK offers a FFP2-level protection with the right filter material. It can be produced by anybody in possession of a 3D printer. More info at the Wiki page.

    1
    updated
  • Projects / Absolute Encoder VHDL core

    VHDL core for absolute position encoders (SSI, BISS, ENDAT).

    More info at the Wiki page
    0
    updated
  • Milosz Malczak / adc-lib

    This library provides a generic API for ADC devices, so that applications can use this API to access any of the supported ADC boards. Currently the library supports the following boards:

    fmc-adc-100m14b14cha

    For testing and debugging purpose it supports also a couple of virtual boards that you can use to start the development of your application.

    More info at the Wiki page

    0
    updated
  • Projects / adc-lib

    This library provides a generic API for ADC devices, so that applications can use this API to access any of the supported ADC boards. Currently the library supports the following boards:

    fmc-adc-100m14b14cha

    For testing and debugging purpose it supports also a couple of virtual boards that you can use to start the development of your application.

    More info at the Wiki page

    0
    updated
  • Projects / ADC Testing

    ADC testing procedures and software. More info at the Wiki page

    0
    updated
  • Projects / AIDA-2020 TLU

    A Trigger/Timing Logic Unit designed for use with High Energy Physics beam-tests. Provides a simple and flexible interface for fast timing and triggering signals at the AIDA pixel sensor beam-telescope. Connects to a FPGA carrier card via a FMC connector.

    ( N.B. Use the sub-project Git repositories, not the top level repository )

    0
    updated
  • Projects / AIDA-2020 TLU - Gateware

    FPGA Firmware ( "Gateware" ) for AIDA-2020 TLU and AIDA mini-TLU

    Uses "IPBus Build" ( ipbb )

    Build instructions at Instructions here

    1
    updated
  • Yi Liu / AIDA-2020 TLU - Gateware

    FPGA Firmware ( "Gateware" ) for AIDA-2020 TLU and AIDA mini-TLU

    Uses "IPBus Build" ( ipbb )

    Build instructions at Instructions here

    0
    updated
  • 1
    updated
  • 1
    updated
  • 0
    updated
  • Projects / AMC CPU COM6

    Double width AMC CPU board for COM EXPRESS mezzanines, dedicated to MTCA 4.0 for physics. It can function either as Standard AMC or RTM in cooperation with dedicated WR-MCH freeing 1 AMC slot. Features: 4 USB 2.0 ports, 4 USB 3.0 ports, Type 6 COM Express module connector, 2 ESATA ports, custom RTM PCIe x16 connector, 2 Gigabit Ethernet ports, 2 Gigabit Ethernet (SERDES) routed to uTCA Port 0 and Port1 serial console connector, Mini Display Port, Mini HDMI port, mPCIe socket, Extension connector for on-board FPGA mezzanine, Double width, full (or mid) size design.

    0
    updated
  • Projects / AMC FMC Carrier AFC

    AMC FMC Carrier is designed to support FMC boards. Equiped in Xilinx Artix-7 FPGA. It allows to connect clock source to any clock input. More info at the Wiki page

    4
    updated
  • Projects / AMC FMC Carrier Kintex AFCK

    AMC FMC Carrier with Kintex is designed to support FMC boards. Equiped in Xilinx Kintex-7 FPGA. It allows to connect clock source to any clock input More info at the Wiki page

    0
    updated
  • Projects / AMC uBackplane SFP

    The AMC micro backplane enables stand-alone operation of an AMC FMC carrier or any other AMC board. It has 4 SFP connectors, 2 QSFP cages, 8 trigger I/O routed to the MLVDS ports and power entry. *Superseded by the project amc-carrier-2-sl*

    0
    updated
  • Projects / Applications of Open Hardware

    Specific applications of open hardware modules are subprojects of this project. These subprojects contain specific firmware and/or software for existing hardware projects.

    0
    updated
  • Projects / ARMadillo

    A multi-purpose ARM-based small piggy-back PCB with Linux support, Ethernet, USB, sound, graphic LCD and lots of I/O pins.

    0
    updated
  • Projects / ARRAY / ARRAY

    A system to characterise large area silicon pad sensors with several hundred channels. It consists of two PCBs. One is an active switching 512-to-1 matrix. The second one is a passive probe card to contact the sensor.

    0
    updated