Explore projects

Data centre environmental sensor - Dust, Temperature, Relative Humidity, Fan - Serial 1 channel - version 1. An environmental sensor for Data Centers that continuously measures airborne particle density in high airflow as well as temperature and relative humidity. It can control its fan speed if needed (PWM controlled fans) and monitors FAN rotational speed (tachometer equipped fans) for precise airflow control and monitoring. It is close to maintenance free and can be integrated in compact enclosures (for example tape drive tray or even an ATX PSU case...). More info at the Wiki page

PHASE (Portable Hardware Analyzer with Sharing Explorer) aims at unifying hardware debugging in a single tool. From the host machine, a user may graphically interconnect components to describe the connection between his computer and the target device to debug. For example, a USB JTAG cable might be the root node, connected to an Arria2 development board with a CPLD and an FPGA, containing a LM32 processor.

Wherever possible, PHASE fetches design descriptions from the internet based on the detected JTAG IDCODEs, USB vendor IDs, or PnP BUS information. In the preceding example, each step of the chain would be automatically detected. The USB cable from the vendor+product codes, the FPGA from the JTAG IDCODE and the LM32 from the Arria2's sld hub. The user would now be presented with read/write access to the data and instruction buses for visual inspection or firmware loading. Furthermore, the user could launch gdb to halt and single-step the embedded LM32 CPU.

If a device is not yet described, the user may assemble a driver out of the reusable software components. For example, an Altera USB-Blaster driver is just a FTDI device chained with a byte packeter and a JTAG bit banger. Once the design has been graphically assembled, it is automatically scanned for attached JTAG devices and the USB cable design is shared online with any future users of the same cable.

A fully operational stand-alone FMC Delay card based White-Rabbit node which can be initialized and perform periodic calibrations without requiring to be plugged on a PC, reducing final system cost, size and power consumption. More info at the Wiki page

A VHDL core for a PCI slave. The other side behaves like a Wishbone master.

More info at the Wiki page

Software support for the SPEC board, including kernel and user-space Linux code. The package also include the fmc-bus driver, which is expected to be used by other carriers as well.

EPICS support for Wishbone peripherals: This project consist of a Generic EPICS IOC AsynDriver to support wishbone peripheral. It include the following features:

Driver for X1052, Gennum, Etherbone WB master. Direct access to any register in the wishbone bus Auto-generation of EPICS Database file using wbgen2 Automatic real number convertion (2 complements, fixed point, signess) using .wb file Support for WR Core and other internal bus protocols (i2c, spi, etc.)

More info at the Wiki page

A system to characterise large area silicon pad sensors with several hundred channels. It consists of two PCBs. One is an active switching 512-to-1 matrix. The second one is a passive probe card to contact the sensor. Software.

Tester board to test PXIe processor modules. Two variants: slot 2 and slot 10 (system timing slot). More info at the Wiki page

Production and functional tests for PXIe controller COM Express based. More info at the Wiki page

MMC firmware written in C, running on a microcontroller inside the board. Written first for the AFC boards. This firmware is thought to be generic enough so other AMC boards could reuse a large part of it. For now, the only "port" is for the LPC1764 chip, but more are planned.

Hydra is a RISC-V based radiation-tolerant SoC designed to operate up to 500 Gy TID. See the wiki for more details.

This project defines data structures, to be embedded in the FPGA memory address space, to enumerate the devices that have been synthetized in the current design. The same structure is also used as a simple flash file system. AKA Self-Describing Bus (SDB) Specification for Logic Cores. The layout is simple enough to be parsed both by the host and by the internal soft-core, if any.

The documentation is public, and related code is GNU GPL licensed.

The robustness of a White Rabbit Network (WRN) is a broad subject covering methods (HW & SW) which enable to increase overall reliability of a WR-based system. This includes Forward Error Correction (FEC), Quality of Service (QoS) assurance, support of network redundancy, proper network design, thorough diagnostics, and increasing the reliability of network components (i.e. switches, nodes). Here, these methods are described and their implementation sources gathered.

The VFC is a VME carrier for two VITA 57 (FMC) mezzanines. For more details please refer to the wiki pages. Obsolete project. Replaced by VFC-HD.

This project focuses on performing with high precision the core WR PTP calculations in fixed-point arithmetic. This will ensure uniform input parameters, code and precision across all WR implementations.

This is a collection of simple macro implementations for Microsemi's ProASIC3 FPGAs to allow simulating post-synthesis designs using GHDL.

Configuration and boot software required to start up the SPEC7 board

Test. May be deleted.

Production and functional tests for FMC TDC 1ns 5cha.