Explore projects

Tool for generating multi-purpose makefiles for FPGA projects.

Main features:

makefile generation for: fetching modules from repositories simulating HDL projects synthesizing HDL projects synthesizing projects remotely (keeping your local resources free) generating multi-vendor project files (no clicking in the IDE!) many other things without involving make and makefiles

Hdlmake supports modularity, scalability, revision control systems. Hdlmake can be run on any Linux or Windows machine with any HDL More info at the Wiki page

The open-source HEV ventilator implements the modes PC-A/C, PC-A/C-PRVC, PC-PSV and CPAP More info at the Wiki page

White Rabbit PTP Core software for LatticeMico32. It consists of a software wrapper for running a PTP daemon without an operating system and device drivers for WRPC HDL internals.

DI/OT Zynq Ultrascale-based System Board with White Rabbit support. More info at the Wiki page

DI/OT Kintex Ultrascale-based Peripheral Board with HPC FMC and SODIMM DDR4 slot. More info at the Wiki page

White Rabbit Trigger Distribution project. More info at the Wiki page

A simple 4-lane PCIe carrier for a low pin count FPGA Mezzanine Card (VITA 57). It supports the White Rabbit timing and control network. Commercially available. Linux and Labview drivers available for some mezzanine cards. More info at the Wiki page

A VHDL core for a VME64x slave. The other side behaves like a Wishbone master.

More info at the Wiki page

A fine delay generator in FMC LPC format with 1 input and 2 outputs. The resolution is 1 ns. Optimized for high frequency pulse repetition rates synchronized to an external clock. More info at the Wiki page

A fine delay generator in FMC format with 1 input and 4 outputs. The resolution is 1 ns. Commercially available. More info at the Wiki page

SAMD21-based monitoring module for DI/OT power supply and fan tray.

A simple VME64x carrier for two low pin count FPGA Mezzanine Cards (VITA 57). It has memory and clocking resources and supports the White Rabbit timing and control network. Commercially available. More info at the Wiki page

Development of software for the White Rabbit switch, and in particular the embedded Linux system running in the ARM9 processor. More info at the Wiki page

A Time to Digital Converter core for Spartan 6 FPGAs.

FPGA Firmware ( "Gateware" ) for AIDA-2020 TLU and AIDA mini-TLU

Uses "IPBus Build" ( ipbb )

Build instructions at Instructions here

FMC LPC card with two High Voltage (HV) outputs and one Low Voltage (5-10V) output. Has mV voltage sensing and mA current sensing capabilities. More info at the Wiki page

A simple 4-lane PCIe carrier for a FPGA Mezzanine Card (VITA 57). It supports the White Rabbit timing and control network. More info at the Wiki page

An FPGA Mezzanine Card (FMC) with a Time to Digital Converter chip to perform one-shot sub-nanosecond time interval measurements. Commercially available. More info at the Wiki page

Idrogen is an Arria10 FPGA board with FMC mezzanine.

PCB design is performed by IJCLab / CNRS-IN2P3. Firmware is developed by Observatoire Radioastronomique de Nançay (ORN) / Observatoire de Paris/ CNRS-INSU

This is a PCB-design + Arduino firmware for an Ethernet-controlled 1:8 RF-multiplexer. It allows selecting as output one of eight input-channels, as commonly used e.g. in timing-laboratories when one wants to measure many RF-sources (clock outputs like 1PPS or 10MHz) with a single instrument (frequency or time-interval counter). The design is for two independent MUX-boards to fit in a 1U 19” rack enclosure. For more information, see the wiki