Explore projects
-
This project contains all the HDL gateware necessary for the FPGA of the WR switch.
Updated -
A collection of cores needed in the White Rabbit node and switch. Includes White Rabbit PTP Core (WRPC).
Updated -
Couples a MAROC ASIC (64 channels each with a fixed threshold discriminator and a slow shaper + sample-and-hold + 12-bit ADC) to a FPGA. Read-out by Gigabit Ethernet (firmware supplied supports IPBus). Multiple boards can be plugged together to increase the channel count. Clocking circuitry compatible with the White Rabbit implementation of PTP. More info at the Wiki page
Updated -
A collection of platform-independent cores such as memories, synchronizer circuits and Wishbone cores.
Updated -
Projects / FMC DEL 1ns 4cha - stand-alone application
GNU General Public License v3.0 onlyA fully operational stand-alone FMC Delay card based White-Rabbit node which can be initialized and perform periodic calibrations without requiring to be plugged on a PC, reducing final system cost, size and power consumption. More info at the Wiki page
Updated -
Brian Koropoff / Hdlmake
GNU General Public License v3.0 onlyTool for generating multi-purpose makefiles for FPGA projects.
Main features:
makefile generation for: fetching modules from repositories simulating HDL projects synthesizing HDL projects synthesizing projects remotely (keeping your local resources free) generating multi-vendor project files (no clicking in the IDE!) many other things without involving make and makefilesHdlmake supports modularity, scalability, revision control systems. Hdlmake can be run on any Linux or Windows machine with any HDL More info at the Wiki page
Updated -
A cute-wr is a compact WR-node implementation with minimum components required. The initial design is derived from SPEC, but would work in an opposite manner as a FMC wr-nic, providing 2 DIO channels, external CLK input, EEPROM, JTAG, RS232, and expandable IOs through FMC connector. The gateware and software of cute-wr would also keep maximum compatibility with SPEC. Project is obsolete. See cute-wr-dp for a similar board.
Updated -
-
David Cussans / AIDAInnova_TLU-gw
GNU General Public License v3.0 or laterFirmware(gateware) for FPGA on AIDA-Innova TLU ( AIDAInnova_TLU )
Updated -
FPGA Firmware ( "Gateware" ) for AIDA-2020 TLU and AIDA mini-TLU
Uses "IPBus Build" ( ipbb )
Build instructions at Instructions here
Updated -
Project containing information about how to calibrate White Rabbit gear. See also https://www.ohwr.org/project/white-rabbit/wikis/Calibration More info at the Wiki page
Updated -
BabyWR is a general purpose small pluggable WR node in a M.2 form-factor. More info at the Wiki page
Updated -
Distribution of clock signals over a White Rabbit network. It uses an PLL with a numerically controlled (DDS) oscillator to extract the characteristics of a signal that in turn are distributed over a White Rabbit network to receiving nodes with a DAC that regenerate exactly the same signal in phase. More info at the Wiki page
Updated -
Production and functional tests for Conv TTL Blocking. More info at the Wiki page
Updated -
-
TiCkS is a flexible White Rabbit based time-stamping board. It is based on the SPEC board developed for the CTA collaboration. It provides an interface to a CTA camera (Inputs: Read-out Trigger signals, Busy Trigger), (Outputs: PPS signal , 10MHz clock, External trigger signal).
Updated -
Etherbone is an FPGA-core that connects Ethernet to internal on-chip wishbone buses permitting any core to talk to any other across Ethernet.
Updated -
Mock Turtle is an HDL core of a generic control system node, based on a deterministic multicore CPU architecture. Mock Turtle can use White Rabbit as the means of communication and synchronization in a distributed system. More info at the Wiki page
Updated -
A VHDL core for a PCI slave. The other side behaves like a Wishbone master.
More info at the Wiki pageUpdated