- 04 Feb, 2021 3 commits
-
-
Adam Wujek authored
Before it was only in PPSI Signed-off-by:Adam Wujek <adam.wujek@creotech.pl>
-
Adam Wujek authored
Use it over WR network simply with: nc -u <IP> 55
-
Adam Wujek authored
Signed-off-by:Adam Wujek <dev_public@wujek.eu>
-
- 03 Feb, 2021 23 commits
-
-
Adam Wujek authored
Signed-off-by:Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
Be albe to get params of netconsole via snmp snmpwalk -c public -v 2c -m WR-WRPC-MIB -M +/var/lib/mibs/ietf:lib 192.168.1.20 wrpcNetconsoleGroup Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
During reboot of a switch, WRPC tries to print messages like: Warning: tx not terminated infinite mcr=0x1001500 Warning: tx timestamp never became available Warning: tx timestamp never became available Warning: tx not terminated infinite mcr=0x1001500 Warning: tx timestamp never became available Warning: tx timestamp never became available Warning: tx timestamp never became available The pp_printf in network functions caused netconsole_write_string to be called recursively. This caused hangs of wrpc. Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
add CMD_NETCONSOLE Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
Before only up to 80 chars were send from any printf Add buffering on sending. Send on a newline or 80 chars Adds 152 bytes Signed-off-by: -
Adam Wujek authored
Mirror serial console to netconsole. To use netconsole executre the following command on a host connected to wrpc: nc -u <IP> 55 Send of a command is triggered by a newline. To see output in the netconsole any command (even empty line) has to be sent first. Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
It looks like in spec-vuart newline is somehow translated from 10 to 13 Signed-off-by: -
Adam Wujek authored
Add: --Setting up init script via SNMP --Generation of SFBFS via SNMP Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
SNMP_INIT should depend on FLASH_INIT not BUILD_INIT SNMP_INIT nor SNMP_SDB makes sance without SNMP_SET Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
Signed-off-by:
-
- 02 Feb, 2021 14 commits
-
-
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
Use full version of pp_printf, it is requried by a new version of monitor. Monitor also requires support of displaying 64bit values Signed-off-by: -
Adam Wujek authored
Together with a previous commit (WIP: update ppsi monitor for new PPSI) --support new version of PPSI (the same as WRS v6.0) --Make to look similar to wr_mon on WRS v6.0 --Add partial redraw; limits bandwith on a serial link and reduces CPU utilization --requires full implementation of pp_printf due to 64bit support and spacing before printed values Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
Before, even if it was defined it was simply ignored Signed-off-by: -
Adam Wujek authored
It will start when the link is up Signed-off-by:
-
