Select Git revision
Search by author
- Any Author
- authors
-
Adam Wujek awujek
-
A. Hahn AHGSI
-
Alessandro Rubini rubini
-
Andela Kostic akostic
-
Antoine Back aback
-
Antonin Broquet broquet
-
Aravind Subbiah asubbiah
-
Aurelio Colosimo colosimo
-
Benoit Rat benoit
-
Cedric Viou CedricDV
-
Cesar Prados bradomyn
-
Davide Ciminaghi ciminaghi
-
Dimitris Lampridis
dlampridis
-
Erik van der Bij erikvanderbij
-
Evangelia Gousiou egousiou
-
Federico Vaga FedericoVaga
-
Frans Schreuder fransschreuder
-
Frederik Pfautsch (MLE) fpfautsch
-
Grzegorz Daniluk greg.d
-
Guido Visser guidov
- Mar 02, 2017
-
-
Adam Wujek authored
Signed-off-by:Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Don't print informational message to standard error when an archive is created. Signed-off-by: -
Adam Wujek authored
Signed-off-by:
-
- Mar 01, 2017
-
-
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
This should make no techical changes. Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
Add: --IP --SNMP --SET --AUX_DIAG This commit makes binary compiled with the config spec_defconfig bigger 15408 bytes. Here is comparision which options add a code: 1020 --only AUX 5028 --only IP 1740 --only config 11636 --IP + SNMP 13580 --IP + SNMP + AUX 15408 --IP + SNMP + AUX + config Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
move helper configuration items at the end of Kconfig, by this all advanced options are correctly indented in menuconfig/nconfig Signed-off-by: -
Adam Wujek authored
It is enabled by default anyway Signed-off-by:
-
- Feb 28, 2017
-
-
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Grzegorz Daniluk authored
-
Adam Wujek authored
Signed-off-by: -
Signed-off-by:Alessandro Rubini <rubini@gnudd.com>
-
This also allows to see how assert behaves (and verify it works): wrc# devmem 1d800 0 Assertion failed (check_stack:18): Stack overflow! (0) Assertion failed (check_stack:18): Stack overflow! (0) [...] Signed-off-by: -
Signed-off-by: -
Signed-off-by: -
This was actually working anyways, because NULL pointers don't trap, and the pointed-to char is currently 0x98, not a digit. But I prefer to fix it before we do one of the following: - move to a new cpu that traps on null - use RAM at a different address than zeero - use "mvi r0, 0" instead of "xor r0,r0,r0" (would parse as 4). Signed-off-by: -
See gcc info pages: "Macros with a Variable Number of Arguments." The ISO-C stadanrd doesn't allow varargs macros to get zero or more arguments. So this fixes the problem using the gcc extension. A standard-compliant alternative would be to have "fmt" included in the variadic part, like this: #define assert(cond, ...) \ if (CONFIG_HAS_ASSERT && !(cond)) \ __assert(__func__, __LINE__, 1 /* forever */, __VA_ARGS__) But the reader wouldn't now it's a fmt+args. Signed-off-by: -
Signed-off-by: -
Signed-off-by:
-
- Feb 27, 2017
-
-
Adam Wujek authored
-
-
-
for some simulations, we just need link-up, so wrpc to initialize and then loop endlessly, this should be the default behaviour
-
-
Adam Wujek authored
-
By default, the bit is zero (masked), which means that PPS signal output is masked when the link status is not ok. This is useful to pervent spurious PPS when in SLAVE mode and the link goes down. When the bit is set, then a PPS is always generated (as long as the PPS valid bit in the ESCR register is set). This is useful in master mode.
-
-
Signed-off-by: -
... and it saves 60 bytes if CMD_CONFIG is set! Signed-off-by: -
Adam Wujek authored
Signed-off-by: -
Adam Wujek authored
Set a maximum number of tries for rxts calibration before returning from the state machine. By this patch it is possible to process other incoming frames/packets during the calibration. Signed-off-by: -
Adam Wujek authored
Signed-off-by:
-
- Feb 24, 2017
-
-
Adam Wujek authored
Signed-off-by:
-
- Feb 23, 2017
-
-
