configs: remove snmp specific configs

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

configs/spec_snmp_defconfig

-#
-# Automatically generated file; DO NOT EDIT.
-# WR PTP Core software configuration
-#
-# CONFIG_WR_SWITCH is not set
-CONFIG_WR_NODE=y
-CONFIG_PPSI_FORCE_CONFIG=y
-CONFIG_PRINT_BUFSIZE=128
-CONFIG_RAMSIZE=131072
-CONFIG_TEMP_POLL_INTERVAL=15
-CONFIG_VLAN_NR=0
-CONFIG_VLAN_1_FOR_CLASS7=0
-CONFIG_VLAN_2_FOR_CLASS7=0
-CONFIG_VLAN_FOR_CLASS6=0
-# CONFIG_HOST_PROCESS is not set
-CONFIG_LM32=y
-CONFIG_EMBEDDED_NODE=y
-# CONFIG_WR_NODE_PCS16 is not set
-CONFIG_STACKSIZE=2048
-CONFIG_PPSI=y
-CONFIG_UART=y
-CONFIG_W1=y
-CONFIG_LATENCY_ETHTYPE=291
-# CONFIG_P2P is not set
-CONFIG_IP=y
-# CONFIG_CMD_CONFIG is not set
-# CONFIG_SYSLOG is not set
-CONFIG_SNMP=y
-# CONFIG_SNMP_SET is not set
-CONFIG_SNMP_AUX_DIAG=y
-CONFIG_SNMP_HW_TYPE="spec"
-# CONFIG_BUILD_INIT is not set
-CONFIG_INIT_COMMAND=""
-CONFIG_HAS_BUILD_INIT=0
-CONFIG_HAS_FLASH_INIT=1
-CONFIG_FLASH_INIT=y
-CONFIG_AUX_DIAG=y
-
-#
-# wrpc-sw is tainted if you change the following options
-#
-# CONFIG_DEVELOPER is not set
-CONFIG_PRINTF_XINT=y
-# CONFIG_PRINTF_FULL is not set
-# CONFIG_PRINTF_MINI is not set
-# CONFIG_PRINTF_NONE is not set
-CONFIG_SDB_STORAGE=y
-# CONFIG_LEGACY_EEPROM is not set
-# CONFIG_WR_NODE_SIM is not set
-CONFIG_VLAN_ARRAY_SIZE=1

configs/spec_snmp_set_verbose_defconfig

-#
-# Automatically generated file; DO NOT EDIT.
-# WR PTP Core software configuration
-#
-# CONFIG_WR_SWITCH is not set
-CONFIG_WR_NODE=y
-CONFIG_PPSI_FORCE_CONFIG=y
-CONFIG_PRINT_BUFSIZE=128
-CONFIG_RAMSIZE=131072
-CONFIG_TEMP_POLL_INTERVAL=15
-# CONFIG_PLL_VERBOSE is not set
-# CONFIG_PFILTER_VERBOSE is not set
-# CONFIG_WRC_VERBOSE is not set
-# CONFIG_VLAN is not set
-CONFIG_VLAN_NR=0
-CONFIG_VLAN_1_FOR_CLASS7=0
-CONFIG_VLAN_2_FOR_CLASS7=0
-CONFIG_VLAN_FOR_CLASS6=0
-# CONFIG_HOST_PROCESS is not set
-CONFIG_LM32=y
-CONFIG_EMBEDDED_NODE=y
-# CONFIG_WR_NODE_PCS16 is not set
-CONFIG_STACKSIZE=2048
-CONFIG_PPSI=y
-CONFIG_UART=y
-CONFIG_W1=y
-CONFIG_LATENCY_ETHTYPE=291
-# CONFIG_P2P is not set
-CONFIG_IP=y
-# CONFIG_CMD_CONFIG is not set
-# CONFIG_SYSLOG is not set
-CONFIG_SNMP=y
-CONFIG_SNMP_SET=y
-CONFIG_SNMP_AUX_DIAG=y
-CONFIG_SNMP_HW_TYPE="spec"
-# CONFIG_BUILD_INIT is not set
-CONFIG_INIT_COMMAND=""
-CONFIG_HAS_BUILD_INIT=0
-CONFIG_HAS_FLASH_INIT=1
-CONFIG_FLASH_INIT=y
-CONFIG_AUX_DIAG=y
-
-#
-# wrpc-sw is tainted if you change the following options
-#
-CONFIG_DEVELOPER=y
-# CONFIG_CMD_LL is not set
-# CONFIG_CHECK_RESET is not set
-# CONFIG_SPLL_FIFO_LOG is not set
-CONFIG_PRINTF_IS_XINT=y
-# CONFIG_PRINTF_IS_FULL is not set
-# CONFIG_PRINTF_IS_MINI is not set
-# CONFIG_PRINTF_IS_NONE is not set
-CONFIG_PRINTF_XINT=y
-# CONFIG_PRINTF_FULL is not set
-# CONFIG_PRINTF_MINI is not set
-# CONFIG_PRINTF_NONE is not set
-# CONFIG_DETERMINISTIC_BINARY is not set
-# CONFIG_UART_SW is not set
-# CONFIG_NET_VERBOSE is not set
-CONFIG_SNMP_VERBOSE=y
-CONFIG_FAKE_TEMPERATURES=y
-CONFIG_SDB_STORAGE=y
-# CONFIG_LEGACY_EEPROM is not set
-# CONFIG_LATENCY_PROBE is not set
-# CONFIG_WR_NODE_SIM is not set
-CONFIG_VLAN_ARRAY_SIZE=1