(no technical change)
Move:
-BR2_CONFIGFILE
-Compilation optimization
to "Build-time configuration" menu

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>
Signed-off-by: Harvey Leicester <harvey.macdonald.leicester@cern.ch>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>
Signed-off-by: Harvey Leicester <harvey.macdonald.leicester@cern.ch>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Remove _VAL entries from Kconfig*. Replace with a syntax:
prompt "" if XXX

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Disable web interface in the default config due to security
vulnerabilities described in CVE-2023-22577.

Please note that web interface can still be enabled manually in the
config file in runtime.

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Maciej Lipinski authored 4 years ago and Grzegorz Daniluk committed 4 years ago

changed from daemon.info to a new option default_syslog that
uses daemon.info as default and additionally parses syslog
messages for info about facility,priority and uses this info
if available.

Revert part of a commit:
f14e28c9

 Setup default config for the switch (WR profile by default)

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

DONE: Kconfig, assembly_ppsi_conf.sh
TODO: SNMP, DOCs, HAL?

Redefine options CONFIG_PORTXX_PARAMS in dot-config
--role={master,slave,auto,none}, keep non-wr for compatibility
--ext={WR}:{HR}, HR for future, if no ext defined use WR as default
--add extra option to disable/enable triggering errors in SNMP
--add option for delay mechanism (dm)
  p2p or e2e
  e2e default

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

wrs_watchdog will use WRS_LOG_OTHER instead of WRS_LOG_WRSWATCHDOG as a
destination for logs.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

--Part of changing names of interfaces in WRS from wrX (wr0-17) to
  wriX (wri1-wri18).
--Rename wr0 to wri1 in help

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Make default log level as "Warning". By this don't print that SNMP packet was
received.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Maciej Lipinski authored 9 years ago and Adam Wujek committed 9 years ago

Added ZyXEL SFPs to database (not yet fully tested for synch)
These SFPs are used in Btrain, if not in database, SNMP shows critical
error

add:
--CONFIG_ROOT_PWD_CLEAR
--CONFIG_PTP_REMOTE_CONF

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

force-dhcp can be used to retrieve a URL to the dot-config, which is downloaded
during boot.
try-dhcp the same as above but don't complain about unsuccessful receive of the
URL via DHCP to SNMP.

Update:
--MIB - add tryDhcp and forceDhcp to the wrsConfigSource object; add
        dhcpError to the wrsBootConfigStatus object
--SNMPd - same as the above; don't error in wrsBootConfigStatus when tryDhcp
          fails
--dot-config's script - support new dot-config sources
--Kconfig - support new dot-config sources
--wrs_failures
--wrs-user-manual
--wrs_release_defconfig - add new items
--create new script for udhcpc to save "filename" configuration field retrieved
  from DHCP server; it contains the URL to the dot-config to be downloaded.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

We are now strong with ppsi, remove any reference to ptp-noposix.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

We don't need a ppsi_defconfig any more, as it is now the default.
Also, use a full defconfig, so it's explicit what the options are.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This also adds the default configuration file for ppsi.  It has no
effect, because it's the default that would apply if no configuration
file is there, but it's useful as a reference, and to ease editing.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

The PPSi daemon can now be selected in Kconfig. This commit
changes configuration and the build scripts to support either of them.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Both the buildroot and busybox config files are not hosted in
configs/buildroot/ within wr-switch-sw, where I expect to place
several such configuration files, at least to try different setups.

The name of the buildroot configuration file is not chosen using
Kconfig (but the default is silently applied.  If the user
provides a relative pathname, it is expanded to
wr-switch-sw/configs/buildroot .

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

The Makefile was empty, this only adds the kconfig rules
and a default target that make silentoldconfig

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>