Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Until now configuration items like WRS_LOG_HAL could change only loglevel of
syslog messages, not the verbosity of the program.

Please note that all messages produced by programs if syslog is
configured will be passed to the syslog at the same <facility>.<level>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Fixed by uplift of a kernel from 3.16.37 to 3.16.38.
Even it is a local privilege escalation bug, which does not impact us,
it is worth to have it fixed.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

To error when VLANs configuration does not match in master and slave.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

--Error when parameters are passed in a form like "1a" (digit followed by a
  not digit)
--For access mode, error when VID is not set.
--Error when parameters in dot-config are "", if are completely empty, then
  libwr will error.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Use VLANS_PORTXX_VID instead of VLANS_PORTXX_VID and VLANS_PORTXX_VID_PTP

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

When wrs_vlans is parsing dot-config and VLAN0 is not configured then
add VLAN0's port mask based on port VLAN modes.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

When parsing dot-config, set "untag none" for all ports that are not in ACCESS
mode.

Fix warnings in wrs_vlans

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Fix the commit:
e5136083

 Kconfig: move ppsi VLANs configuration to VLANs section

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Alessandro Rubini authored 8 years ago and Adam Wujek committed 8 years ago

Meanwhile, make the mac address static to same some space/time.
But we really need a table for the mac address presets

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Substitude all occurrences of upper case strings like HOSTNAME, IPADDR and
MACADDR with the corresponding value. Before only first occurrence of each
was substituted

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Alessandro Rubini authored 8 years ago and Adam Wujek committed 8 years ago

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

In few places drop parameter of VLANs in dot-config was descibed that
can take different set of parameters, while the only accepted was y or n.
Now it can be y, yes, 1, n, no, 0. However, the tool (wrs_vlans) can use
only 1 or 0 for "drop" parameter.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Webinterface does not support saving changes of VLAN configuration to
a dot-config. Warn user about it.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Move ppsi VLAN configuration from PORTXX_PARAMS(ppsi_vlans) to
VLANS_PORTXX_VID_PTP

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Grzegorz Daniluk authored 8 years ago and Adam Wujek committed 8 years ago

userspace/tools/wrs_vlans.c
Signed-off-by: Grzegorz Daniluk <grzegorz.daniluk@cern.ch>
the rest:
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Grzegorz Daniluk authored 8 years ago and Adam Wujek committed 8 years ago

Synthesized from wr-switch-hdl commit 1d50045

Fix build error of wrs-user-manual. This file should have been pushed
in the commit:
73f319c5

 doc/wrs-user-manual: add the description of VLANs configuration

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

In hal_main.c, use timeout functions from libwr. Use two different timeouts for
temperature/fan updates and for port information.

In hal_ports.c use different timeouts for sync LEDs, link LEDs and SFPs' DOMs
updates.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Use last timeout's timestamp as a reference for new timeout instead of current
time.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

The color of left LED of each port displays the actual state, not the
configured state. If there are more than one instances on a particular port
then the most important state is displayed in the order Slave, Master, Other.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Enable synced LED (right LED of each port) when ppsi's servo got synced.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Update fan's PWM only when there is a need to change fan's speed.
It should save some cpu cycles because of reduced number of i2c transers.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

For port configured as none, non-wr, auto use the same orange color.
Before none and auto were represented with the same color as master (yellow).

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>