Fixed by uplift of a kernel from 3.16.37 to 3.16.38.
Even it is a local privilege escalation bug, which does not impact us,
it is worth to have it fixed.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

To error when VLANs configuration does not match in master and slave.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

--Error when parameters are passed in a form like "1a" (digit followed by a
  not digit)
--For access mode, error when VID is not set.
--Error when parameters in dot-config are "", if are completely empty, then
  libwr will error.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Use VLANS_PORTXX_VID instead of VLANS_PORTXX_VID and VLANS_PORTXX_VID_PTP

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

When wrs_vlans is parsing dot-config and VLAN0 is not configured then
add VLAN0's port mask based on port VLAN modes.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

When parsing dot-config, set "untag none" for all ports that are not in ACCESS
mode.

Fix warnings in wrs_vlans

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Fix the commit:
e5136083

 Kconfig: move ppsi VLANs configuration to VLANs section

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Alessandro Rubini authored 8 years ago and Adam Wujek committed 8 years ago

Meanwhile, make the mac address static to same some space/time.
But we really need a table for the mac address presets

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Substitude all occurrences of upper case strings like HOSTNAME, IPADDR and
MACADDR with the corresponding value. Before only first occurrence of each
was substituted

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Alessandro Rubini authored 8 years ago and Adam Wujek committed 8 years ago

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

In few places drop parameter of VLANs in dot-config was descibed that
can take different set of parameters, while the only accepted was y or n.
Now it can be y, yes, 1, n, no, 0. However, the tool (wrs_vlans) can use
only 1 or 0 for "drop" parameter.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Webinterface does not support saving changes of VLAN configuration to
a dot-config. Warn user about it.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Move ppsi VLAN configuration from PORTXX_PARAMS(ppsi_vlans) to
VLANS_PORTXX_VID_PTP

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Grzegorz Daniluk authored 8 years ago and Adam Wujek committed 8 years ago

userspace/tools/wrs_vlans.c
Signed-off-by: Grzegorz Daniluk <grzegorz.daniluk@cern.ch>
the rest:
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Grzegorz Daniluk authored 8 years ago and Adam Wujek committed 8 years ago

Synthesized from wr-switch-hdl commit 1d50045

Fix build error of wrs-user-manual. This file should have been pushed
in the commit:
73f319c5

 doc/wrs-user-manual: add the description of VLANs configuration

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

In hal_main.c, use timeout functions from libwr. Use two different timeouts for
temperature/fan updates and for port information.

In hal_ports.c use different timeouts for sync LEDs, link LEDs and SFPs' DOMs
updates.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Use last timeout's timestamp as a reference for new timeout instead of current
time.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

The color of left LED of each port displays the actual state, not the
configured state. If there are more than one instances on a particular port
then the most important state is displayed in the order Slave, Master, Other.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Enable synced LED (right LED of each port) when ppsi's servo got synced.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Update fan's PWM only when there is a need to change fan's speed.
It should save some cpu cycles because of reduced number of i2c transers.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

For port configured as none, non-wr, auto use the same orange color.
Before none and auto were represented with the same color as master (yellow).

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

It might happen that the reader of shmem ignores the lock, but at least shall
check the version of HAL. When it is not 0 then we can be sure HAL's shmem
is initialized. However, don't relay on this behaviour.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Since by default we use info level for messaging, on a busy, dynamic network
creating and removing rtu entries can produce a lot of syslog messages.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>