Peter Jansweijer authored 5 years ago and Grzegorz Daniluk committed 5 years ago

add wrpc/wrc_phy16_direct_dmtd.bram (spll KP parameters times 5 due to VCXOs range 20 ppm, incremented mode master lock timeout)
wrc_phy16_direct_dmtd.bram build with:
wrpc-sw.git peter_direct_dmtd SHA 50f1c0e
ppsi.git peter_direct_dmtd SHA bf5f6de

Miguel Jimenez Lopez authored 5 years ago and Grzegorz Daniluk committed 5 years ago

- Add generic parameter for the SDB info of the auxiliary interface of the WRPC.
- Export pps_csync and pps_valid ports from the WRPC.

Miguel Jimenez Lopez authored 5 years ago and Grzegorz Daniluk committed 5 years ago

wr_nic_wrapper: Fix copyright issues.

Miguel Jimenez Lopez authored 5 years ago and Grzegorz Daniluk committed 5 years ago

Fix a place & route error related to the OBUF used for PPS output signal.

It's used only locally in dmtd sampler. We don't have enough global
clock nets in Virtex6 for 18-port version of WRS.

In the mode in which data is provided to wr_streamers with clk_ref_i,
the timestamps are captured with the clk_ref_i clock. The input data
then crosses domains via FIFO to clk_sys_i clock. The timestamp is
used by FSM in the clk_sys_i domain. The pulse from the timestamper
was expected to happen when the frame is already started to be
generated by the FSM, thus the latch of the tag_valid pulse
(indicating the timestamp was generated) was reseted in the IDLE
state of this FSM. This is OK when the input data and the FSM
are in the same clock domain. IF there is asynch FIFO in between,
it can happen that the timestamp is generated still in the IDLE
state of the FSM... I've changed the reset of the latch to happen
after the timestamp is embedded in the header (i.e. in the
FRAME_SEQ_ID state).