@@ -60,3 +60,9 @@ After checking that we can start:
4. In the newly created output dir there now is a BOOT.bin. This file can now be flashed in QSPI memory (mt25ql256-qspi-x8-dual_parallel) with this script. The script assumes a local JTAG connection is made with the spec7.
vivado -mode tcl -source ./Flash_QSPI_JTAG.tcl
To use a remote hardware server with ipv4 addres <SERVER_IP> use:
5. After flashing the QSPI memory, the design will be automaticly loaded after a POR event. Either by pressing the 'S5' Button or triggering an SMBus reset event on the PCIe connector.