Detailed Status
| Date| * Event *|
| 01-02-2016 | Start working on project. |
| 15-02-2016 | Starting the first ADC board Design |
| 05-03-2016 | Finishing the first Design |
| 05-03-2016 | Starting the layout of the first ADC board |
| 05-04-2016 | Finishing the firsts design and layout, wait for review
|
| 12-04-2016 | Presentation of the project, design and layout at CERN
|
| 15-04-2016 | Full design and layout review at CERN |
| 18-04-2016 | Start looking for an other ADC with 4 input channels
instead of 2 |
| 18-04-2016 | Start looking on algorithms to find the delay between the
incoming signals |
| 19-04-2016 | Start simulations to see how to improve the resolution of
TDC |
| 25-04-2016 | Two possible algorithms are found |
| 02-05-2016 | Finally decided to use the ADC AD9253 as it has 4 input
channels and looks like the previous one |
| 15-05-2016 | Start to update the schematics |
| 23-05-2016 | Finished the new schematics, waiting for review |
| 31-05-2016 | Finally decided to add a local oscillator in addition to
the external one |
| 31-05-2016 | Searching for one local oscillator |
| 03-06-2016 | Oscillator found. Update the schematics |
| 03-06-2016 | Schematic updated. Wait for review |
| 05-06-2016 | Starting configuration of the MicroZed |
| 21-06-2016 | Review of the schematics |
| 21-06-2016 | Handling of the comments : adding a flip flop to reduce
the FPGA output jitter |
| 27-06-2016 | Starting new layout |
| 05-07-2016 | Layout finished. Waiting for review |
---