Detailed Status
Date |
Event |
01-02-2016 |
Start working on project. |
15-02-2016 |
Starting the first ADC board Design |
05-03-2016 |
Finishing the first Design |
05-03-2016 |
Starting the layout of the first ADC board |
05-04-2016 |
Finishing the firsts design and layout, wait for review |
12-04-2016 |
Presentation of the project, design and layout at CERN |
15-04-2016 |
Full design and layout review at CERN |
18-04-2016 |
Start looking for an other ADC with 4 input channels instead of 2 |
18-04-2016 |
Start looking on algorithms to find the delay between the incoming signals |
19-04-2016 |
Start simulations to see how to improve the resolution of TDC |
25-04-2016 |
Two possible algorithms are found |
02-05-2016 |
Finally decided to use the ADC AD9253 as it has 4 input channels and looks like the previous one |
15-05-2016 |
Start to update the schematics |
23-05-2016 |
Finished the new schematics, waiting for review |
31-05-2016 |
Finally decided to add a local oscillator in addition to the external one |
31-05-2016 |
Searching for one local oscillator |
03-06-2016 |
Oscillator found. Update the schematics |
03-06-2016 |
Schematic updated. Wait for review |
05-06-2016 |
Starting learning the MicroZed |
21-06-2016 |
Review of the schematics |
21-06-2016 |
Handling of the comments : adding a flip flop to reduce the FPGA output jitter |
27-06-2016 |
Starting new layout |
05-07-2016 |
Layout finished. Waiting for review |
06-07-2016 |
Start MicroZed programation |
13-07-2016 |
Layout Review at CERN |
02-08-2016 |
Layout corrected, first prototype ordered |
17-08-2016 |
Some problems with the DMA transfert, debugging |
19-08-2016 |
Corrected the AXI transfert. The DMA is working |