Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Tune SNMP_MAX_OFFSET_PS and SNMP_MAX_DELTA_RTT_PS
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Remove the n_err_rxtx_deltas from the struct wr_servo_state since it is not used
anymore. Checking deltas was moved directly to SNMPD.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Checking whether deltas are zero is moved to SNMP.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

When changing the state of the WR servo we can call a hook (function
pointer) to a function defined by a user in the upper layer (wrpc-sw).
The purpose of the hook is to add new functionalities when we reach a
specific state (Alarms, IRIGB, etc...) without needing to change the
code of PPSI.

[This is a rework of the original patch by Benoit. Mainly, I added
the extra integer argument to the hook (so I call it twice: both
entering and leaving the servo), and I removed the function to
set the hook from wrpc: the main function can set the pointer directly]
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

The switch is padding short frames sent from the CPU in the nic core.
When the frame is then being sent to an "access" port, the tag is
removed, and thus the frame gets shorter.  The net effect is that
sync/f-up/delay-rep were sent short, and discarded by the recipient.

Greg could move padding to the endpoint, but this extra work is not
really needed, as nobody else is expected to get frames from the CPU
over the SFP ports. So we chose to fix transmission in software and
avoid to change the gateware.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

The way vlan frames are received is different on wrs than in normal
Linux. Likely my own driver (for wrs hardware) is not doing the right
thing.

So, when we receive tagged frames, they reach us as-is (not as the
payload only, with "aux" data on a side). This commit considers this
case.

The commit also fixes a pair of other details -- mostly, the amount of
"short packet of 0 bytes, ignored", by returning -2 to mean "drop with
no error".
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

SQUASH fix for ARCH_WRS
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

When we support multiple vlans, we must issue announce to all
supported vlans. Same applies to sync/follow-up. This changes
state-master.c to do the sending several times.

Initially I changed msg.c (for the announce message only), this saved
the repeated call to msg_pack_announce() but by doing it at
state-master level I have simpler code and layer consistency (doing
sync/fup at msg.c level would be a mess).
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

With UDP we have two channels but we talk with the same peers.
Moreover, we reply with a general message to an event message, so
having two peers was plain wrong.

I'm well aware this commit should happen before vlans are introduced,
but I don't want to deal with all the conflicts in moving it back.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

The changes to the two socket files are very similar, and rely
on the linux way of doing things: on receive we must listen to
every protocol and use the auxiliary information to tell vlans
apart.  On transmit we must  build the hardware header with vlan
information.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

While looking for an alignment bug I had bad frames: being able to
look at the binary content of all ptp-ethtype frames (or ip/udp/ptp)
is very useful in that situation.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This requires some change to the include files, to be able to
build for all architectures.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

The vlanhdr is not something I can find in standard include files,
so here is a custom definition, called pp_vlanhdr.

Adding peer_vid is needed so a master can reply to its own slave,
while listening to several vlans.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This step is in preparation for vlan support, where the tx and rx
headers have a different length.

This commit doesn't build for arch-wrpc, fixed in the next commit
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This "netpath" is a pain, completely needless. The NP(ppi)
is overhead in the code and must be removed. It is now turned to
an identity function, so external patches won't conflict.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This is partly undoing the previous commit, but there is really
no common code between udp and raw in the init path.

Besides, initializing for vlan means creating a raw socket, and
we'd break the whole "switch" idea.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

We can't have VLAN support with UDP, since this VLAN is a hack (needed
for GSI operational setup).

The error check about udp+vlan is only in time-unix, because arch-wrs
uses unix socket initialization, and other architectures can't run UDP.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This was a trial of mine, but it really has never been working (at least
on wrs -- I think nobody ever tried a non-wr code base on wrpc).

Too much of the timetamping, servo, pll, is dependent on WR being
available, this academic idea doesn't make much sense, so let's remove
a number of conditionals (and associated potential bugs).
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

--update hal_shmem to version 7
--add tx and rx packet counters
--add error counters for SNMP
--increase ppsi shmem version to 6
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Add counters used by SNMP:
--n_err_state (state different than WR_TRACK_PHASE)
--n_err_offset (offset exceeded SNMP_MAX_OFFSET)
--n_err_delta_rtt (delta rtt exceeded SNMP_MAX_DELTA_RTT)
--n_err_rxtx_deltas (any delta_*x_* bigger than SNMP_MAX_RXTX_DELTAS)
All these counters are increased on servo update if error condition is met

Due to above, increase WRS_PPSI_SHMEM_VERSION to 6
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Add counting of tx and rx PTP packets.
__recv_and_count and __send_and_log are arch independent functions.
Increase WRS_PPSI_SHMEM_VERSION due to add of tx_count and tx_count firlds in
pp_instance.
Update WRS_PPSI_SHMEM_VERSION to 5
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Remove fields used to keep thresholds of temperature sensors (not used by ppsi)
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This temporary wr-servo state, with the hack of next_state is not
really clean. I took a while to understand it, and this tries to make
it clearer for my fellow developer.

When we change state by commanding hardware, we must wait for hw to be
done with the change, and this is better a flag than another state.

While making this clean, the commit stresses the fact that we loose
one wr-servo iteration every two of them.  Unfortunately, the trivial
fix I tried some time ago doesn't actually work (the slave won't
sync), so the behaviour remains unchanged by this commit, but the
problem is not clearly visible in code and comments, so we may fix it
"the real way" later on.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>