home.md

-# Zynq carrier for RFoWR based application (CITY)
+# CarrIer for RFoWR-based Timing sYstems (CITY)
 
 ## Project description
 
@@ -14,9 +14,9 @@ CITY is based on two main design:
 
 It is a standalone pizza-box module, enclosed in a 19"1U rack.
 
-The board prototypes are currently under manufacturing. Below is an image of the PCB top view:
+Below is an image of the PCB top view:
 
-![CITY PCB top view](https://ohwr.org/project/city/wikis/uploads/a6f3d44e73627306b9e6e9c44262d8ad/city_pcb_top_view.jpg)
+![CITY board top view](https://ohwr.org/project/city/wikis/uploads/city_board_top_view.jpg)
 
 ## Main features
 - XC7Z030 controller, SoC with Kintex-7 logic (called PL, i.e.
@@ -95,6 +95,18 @@ The board prototypes are currently under manufacturing. Below is an image of the
 
 - 10-layer PCB
 
+## Prototypes
+The board prototypes have been received and tested. Issues encountered have been created in Issues category of this repository.
+Main features tested:
+- Power supplies
+- Zynq PS (baremetal, Linux)
+- Boot peripheral (QSPI, MicroSD, JTAG)
+- Main buses (I2C, SPI)
+- Reset buttons
+- WR link and synchronization
+- RFoWR synchronization in both Master & Slave modes with a 352MHz reference input frequency.
+- Outputs stages (TTL basic and fine-delayed, RF reconstructed, PPS, 10MHz...)
+
 -----
 
 ## Project information
@@ -124,7 +136,8 @@ The board prototypes are currently under manufacturing. Below is an image of the
 | --------- | ------ |
 | 10-09-2019| Launch manufacturing of 2 board prototypes. | 
 | 12-09-2019| ohwr pages started. | 
+| 17-03-2020| CITY prototypes received and tested. V2 ready. | 
 
 -----
 
-13 September 2019
+17 March 2020