crate v1.2
All issues for this milestone are closed. You may close the milestone now.
Project | Open issues | State | Due date |
---|---|---|---|
DIOT CompactPCI Serial crate hardware | 0 | Open |
Unstarted Issues (open and unassigned)
0
Ongoing Issues (open and assigned)
0
Completed Issues (closed)
21
- DIOT CompactPCI Serial crate hardware · BOM: update AUX connector ribbon cable and backplane connector
- DIOT CompactPCI Serial crate hardware · BOM: add CPCI-Serial backplane guiding element
- DIOT CompactPCI Serial crate hardware · BOM: update link to PCB Front Panel
- DIOT CompactPCI Serial crate hardware · Wiring diagram: wrong SW1 dip switch configuration
- DIOT CompactPCI Serial crate hardware · IDC ribbon cables plugs not matching well IDC sockets on the main and power backplane
- DIOT CompactPCI Serial crate hardware · Bug in the Cabling Manual
- DIOT CompactPCI Serial crate hardware · Add grounding screw and associated winged nut to the BOM
- DIOT CompactPCI Serial crate hardware · Main backplane guiding element is not mounted. This should be corrected in the backplane Kicad design.
- DIOT CompactPCI Serial crate hardware · Add ESD contacts in guiding rails
- DIOT CompactPCI Serial crate hardware · Add EMC gasket for aluminium bars holding top and bottom perforated covers
- DIOT CompactPCI Serial crate hardware · Use more ergonomic handles
- DIOT CompactPCI Serial crate hardware · Power backplanes dip switches configuration
- DIOT CompactPCI Serial crate hardware · Do not mount backplanes grounding screws by default
- DIOT CompactPCI Serial crate hardware · Power cables 12V, GND, 5V arrangement and thickness
- DIOT CompactPCI Serial crate hardware · front dividing plate is very close to the 230VAC contacts of the relay, should have some insulation layer added
- DIOT CompactPCI Serial crate hardware · update BOM with new LSZH cables after prototypes assembly
- DIOT CompactPCI Serial crate hardware · BOM lists only 1 power backplane, it should be 2 power backplanes per crate
- DIOT CompactPCI Serial crate hardware · Front panel AUX D-SUB connector pinout missing in the specification
- DIOT CompactPCI Serial crate hardware · Consider replacing power entry module FN281-2-06 with FN282-2-06
- DIOT CompactPCI Serial crate hardware · Fan Tray connector: incompatibility between 16pin IDC on the backplane and 15-pin D-SUB on the front panel
- DIOT CompactPCI Serial crate hardware · [Crate Front Panel] Dimensions and Isolation Plate