Explore projects

Quad 10MBd POF/HCS optical receiver (10Mbd) FMC card using an LPC connector.

Triple 10MBd POF/HCS optical receiver with single optical transmitter (10Mbd) using an LPC connector.

Gateware for Beam Position Monitor, including digital signal processing chains, data acquisition engines, ADC and analog front-end peripherals control/monitoring, timing and control system interface.

Projects using the USB bus as main bus

The fmc-adc125m14b12ch-dac1250m16b2ch (fmc-dad) board is a 12 ch ADC/ 2 ch DAC channels board using FMC HPC and QSE connectors It has been designed for system requiring a feedback loop mechanism with precise timing, such as the tunning of RF cavities. More info at the Wiki page

Hardware design of FMC TDC 1ns 5cha. Includes schematics, PCB layout and manufacturing files.

Gateware (HDL design) for FMC TDC 1ns 5cha on SPEC and SVEC carriers.

MasterFIP is an Open Hardware implementation of a WorldFIP master node.

Gateware (HDL design) for MasterFIP.

Software to support the MasterFIP, including Linux device driver, library and test program.

Production and functional tests for the MasterFIP.

Common gateware for the different level conversion circuits.

The dual channel L band front-end consist of a FMC dual channel L band down-converter, preamplifiers and duplex filters. Each IQ down-converter has a wide adjustable bandwidth (>100 MHz), adjustable gain and two 250MHz 8 bits or 160 MHZ 12 bits or 105MHZ 14 bits multi-mode ADC's. The down-converter mode is switchable: single receiving frequency band for both channels, or dual frequency band: each channel has its own receiving frequency band. For GNSS its includes timing support, Other applications are radio astronomy and microwave digitizing back-end.

Hardware design of Conv TTL Blocking. Includes schematics, PCB layout and manufacturing files. More info at the Wiki page

Production and functional tests for Conv TTL Blocking. More info at the Wiki page

Gateware (HDL design) for Conv TTL RS485

Hardware design of Conv TTL RS485

Production and functional tests for Conv TTL RS485

General application FMC card that can be used to acquire signals from a variety of sensors - thermopiles, RTDs, resistive bridges, etc. It has a SCSI-type input connector and uses an SPI interface connected to the LA lanes.

CompactRIO module with White Rabbit functionality. LabVIEW support, front-panel connector with 10 I/O lines.

More info at the Wiki page