This is the first step of a series of changes aimed at a cleaner and
more flexible management of triggers, as well as a really transparent
"user" trigger.

This commit does the following:

- zio_fire_trigger renamed to zio_arm_trigger: the trigger is
actually armed by software, and then it fires by hardware. This
distinction is especially important for the transparent trigger: when
devices have internal timing, the software trigger must arm it
immediately (as opposed to the dumb devices, where the software trigger
really causes I/O to happen).

- ZIO_TI_BUSY renamed to ZIO_TI_ARMED. Also, ZIO_TI_COMPLETING is
removed. The new, simplified policy is like this: the trigger is armed
by software (the trigger module), but completion is driven by hardware
(the device module).  There is no need for a COMPLETING flag, because
the ARMED flag is only cleared after data_done is over for all channels
in the cset.

- the cset spinlock is used to protect all changes of the ti flags.

- change_current_trigger completely revised and fixed to match new
conventions.

- trigger->abort now takes "ti" instead of "cset" as argument; it is
more natural do do so, and no current trigger implements abort so no
harm is done.

- the trigger->abort and trigger->change_status methods are now
always called while holding the cset spinlock. ZIO core calls abort
when changing the current trigger type, to ensure no pending blocks
are there.

- zio_trigger_abort is renamed to zio_trigger_abort_disable, with
an additional argument to state whether the trigger must be atomically
disabled after the abort is over. This avoids a race condition on
trigger removal. It returns the previous "disabled" bit, to be used
when changing a buffer type while preserving trigger status.

- minor unrelated improvements in error management in objects.c.

- documentation update to match the new locking, and a few typos fixed.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
Acked-by: Federico Vaga <federico.vaga@gmail.com>