add:
-- wrpcDateTAI
-- wrpcDateTAIString
-- wrpcSystemUptime

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

They will be implemented with different OIDs.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Mostly spacing and indentation.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

adding uint8_t data_size; to struct snmp_oid does not change memory usage
due to memory alignment.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

rename:
fill -> get
fill_tics -> get_tics
fill_date -> get_date
fill_asn -> get_value
fill_struct_pp_asn -> get_pp
fill_struct_p_asn -> get_p
fill_int32_saturate -> get_i32sat
fill_int32_saturate_pp -> get_i32sat_pp

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

By this 32bytes are saved.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

It will be possible to set via SNMP system name when SNMP SET is implemented.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Respond with SNMP_ERR_GENERR for versions never than 2.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Now all snmp walks should be possible

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Add object with wrpc's version.
For example:
WR-WRPC-MIB::wrWrpcMIB.3.1.0 = STRING: "wrpc-v3.0-161-g4d63c77-dirty"

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Convert function fill_int32_saturate to take pointer to the data and asn.
The interpretation of pointer in struct snmp_oid is done in
fill_int32_saturate_pp.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

From now, struct snmp_oid contais the pointer (p) which is up to the callback
function to know how to interpret the pointer.

It is easier to handle **data and *data in declaration of the oid_array.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

From now function adding the data to snmp packet (fill_asn), just takes pointer
to the data and asn type. Interpretation of a pointer in struct snmp_oid is now
up to the callback function.

It makes easier to handle different data types.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

objects:
--oid_wrpcNicTX
--oid_wrpcNicRX

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

add:
--oid_wrsPtpServoState
--oid_wrsPtpServoStateN
--oid_wrsPtpClockOffsetPsHR
--oid_wrsPtpSkew
--oid_wrpcPtpRTTHR
--oid_wrpcPtpDeltaMs
--oid_wrpcPtpCurSetpoint

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Used to convert 64bit to 32bit. It is better to saturate 32bit during
conversion than just passing 32 LSB bits.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

snmp_get_next works only when requesting oid is valid. Otherwise it fails to
find next entry.

Due to the above the snmpwalk works only when the walk is started from
the existing oid. Since snmp walk scans only oids in the current branch,
there was a need to create a special oid .1.3.

$ snmpwalk -On -c public -v 1 192.168.1.20 1.3
.1.3.6.1.2.1.1.5.0 = STRING: "wrc"
.1.3.6.1.2.1.25.1.1.0 = Timeticks: (792773) 2:12:07.73
.1.3.6.1.2.1.25.1.2.0 = Hex-STRING: 07 B2 00 01 05 00 00 00
.1.3.6.1.4.1.96.100.7.5.1.15.1 = Counter32: 445
.1.3.6.1.4.1.96.100.7.5.1.16.1 = INTEGER: 10
.1.3.6.1.4.1.96.100.7.5.1.17.1 = INTEGER: 174810
.1.3.6.1.4.1.96.100.7.5.1.18.1 = INTEGER: 191115
.1.3.6.1.4.1.96.100.7.5.1.19.1 = INTEGER: 157655
Timeout: No Response from 192.168.1.20

NOTE: Timeout message appears becasue there is no responce from node when
wrong packet is sent.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Move SNMP just after syslog.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

--add defines of ASN types
--add 5 object from wrsPtpTable

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Alessandro Rubini authored 9 years ago and Adam Wujek committed 8 years ago

The "community" string is public. We have tree items only: the host
name, the date and uptime.

The code is designed to make it simple any addition. But we only have
snmpget support, not snmpwak (i.e. "get next" query).

This is run on an host build (CONFIG_HOST_PROCESS) where the time and
date are not related to the real world:

   # snmpget -v 1 -c public 192.168.16.1 .1.3.6.1.2.1.1.5.0
   SNMPv2-MIB::sysName.0 = STRING: wrc
   # snmpget -v 1 -c public 192.168.16.1 .1.3.6.1.2.1.25.1.2.0
   HOST-RESOURCES-MIB::hrSystemDate.0 = STRING: 1970-0-1,19:52:34.0
   # snmpget -v 1 -c public 192.168.16.1 .1.3.6.1.2.1.25.1.2.0
   HOST-RESOURCES-MIB::hrSystemDate.0 = STRING: 1970-0-1,19:53:2.0
   # snmpget -v 1 -c public 192.168.16.1 .1.3.6.1.2.1.25.1.1.0
   [...] hrSystemUptime.0 = Timeticks: (94193300) 10 days, 21:38:53.00

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>