New tool is to dump SFP's internal memory.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Use pr_debug instead of pr_info, to avoid printing these two messages
at i.e. wrs_version execution
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

RTT-reporting on long links (again!): wr_mon and SNMP on WR-Switch
http://www.ohwr.org/issues/1277Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

following commits were added to master by mistake:
18318cf9 etc: use wriX interfaces in example file ppsi-wrs.conf
735f997f arch-wrs: use wriX interfaces for default configuration
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

ppsi_servo->skew is a 64bit value, while corresponding OID (wrsPtpSkew) is
Integer32.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

wrs_pstats does not use fpga memory mapping anymore.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

The option was never implemented and nobody remembers what it was supposed to
be.

Fix not displaying temperatures for webinterface in wr_mon. The bug was
introduced by commit:
userspace/tools: improve wr_mon to display statistics in a more segregated way
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Fix document's buld error:
! LaTeX Error: Environment longtable undefined.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

wrsw_hal.conf is not used anymore. Remove dead code.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

This file is no longer used. It should be removed a long time ago together
with commit:
ea6485aa userspace: remove old lua-based config, now unused
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Fix condition of printing "cleaning multicast entries not supported yet..."
Since the search was done over all entries, it doesn't mean entry is multicast
if port_mask_dst doesn't equal (1 << dest_port)
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Change pstats to use 64bit counters instead of 32 bit.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Apply zero bias at every read from FPGA.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

zeros keep only value read from FPGA at zeroing. The rest can be zeroed simply
in software.

Change the size of cntrs and userv from unsigned long long to uint64_t.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Use different OID for pstats.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

move wrsPstatsTable (wrSwitchMIB.7.4) to wrsPstatsHCTable (wrSwitchMIB.7.7)
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

HC will use 64bit counters.
Rename files and make them compile.
wrsPstatsHCTable will go to .7.7 in MIB
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Because 32bit kernel does not export 64bit values via sysctl in a easy way,
each pstats counter is split into two 32bit values which have to assembled into
one value in software that reads pstats counters.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Add if-mib/ifXTable to the SNMPd. It adds 64bit (HC) counters to the ifTable.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Replace time() calls with monotinic version from libwr
Fix bug 1164 and similar problems in other programs.

It was possible that SNMP objects in expert branch don't update.
It pop-up in following scenario:
  1. slave switch is started with no ntp configured
  2. read via snmp from slave
  3. master switch is started with no ntp configured
  4. slave sync to master and set it's time, by this system clock on slave is set
     to earlier date
  5. read via snmp from slave will end up in the same results in expert branch of
     the MIB.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>