--Part of changing names of interfaces in WRS from wrX (wr0-17) to
  wriX (wri1-wri18).
--Rename wr0 to wri1 in help

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Hostname can be configured in dot-config to be set via DHCP or statically.

Additionally update documentation.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Make default log level as "Warning". By this don't print that SNMP packet was
received.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Maciej Lipinski authored 9 years ago and Adam Wujek committed 9 years ago

Added ZyXEL SFPs to database (not yet fully tested for synch)
These SFPs are used in Btrain, if not in database, SNMP shows critical
error

force-dhcp can be used to retrieve a URL to the dot-config, which is downloaded
during boot.
try-dhcp the same as above but don't complain about unsuccessful receive of the
URL via DHCP to SNMP.

Update:
--MIB - add tryDhcp and forceDhcp to the wrsConfigSource object; add
        dhcpError to the wrsBootConfigStatus object
--SNMPd - same as the above; don't error in wrsBootConfigStatus when tryDhcp
          fails
--dot-config's script - support new dot-config sources
--Kconfig - support new dot-config sources
--wrs_failures
--wrs-user-manual
--wrs_release_defconfig - add new items
--create new script for udhcpc to save "filename" configuration field retrieved
  from DHCP server; it contains the URL to the dot-config to be downloaded.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

The new Kconfig option allows dowloading ppsi.conf at boot time, from
TFTP or otherwise.  The filename in the URL can include IPADDR and/or
MACADDR, so the same configuration string can be used to set up a
batch of switches with different configurations.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

--Add destiantion to watchdog log to Kconfig
--update documentation

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

--Update /etc/init.d/network script.
Keeping lo up prevents monit from restarting dropbear and lighttpd,
then finally rebooting system due to exceeded number of maximum application's
restarts.
--keep lo ocnfiguration in /etc/network/interfaces due to above
--Update user manual

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Update Kconfig
Update user-manual
Update monit's init script

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Update Kconfig
Update user-manual
Update snmpd's init script

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

When monit is started from inittab instead of script /etc/init.d/monit.sh
it will be respawned after its crash.
Support stopping/starting monit by /etc/init.d/monit.sh
To stop monit, STOP signal is sent to it. By this, init will not respawn monit,
because it is still present in process' list.
Add disabling monit in dot-config by option CONFIG_MONIT_DISABLE.
When monit is disabled by dot-config, monit.sh will sleep forever, to
satisfy init and prevent respawning
Update dot-config items in user-manual.

Include only *.conf instead of all files from /etc/monit.d/.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Added init script /etc/init.d/S70wrs_auxclk to start wrs_auxclk with parameters
read from dot-config.

Added parameters to Kconfig:
--WRSAUXCLK_FREQ
--WRSAUXCLK_DUTY
--WRSAUXCLK_CSHIFT
--WRSAUXCLK_SIGDEL
--WRSAUXCLK_PPSHIFT
All above are used as parameters to wrs_auxclk,
which configure external clock clk2

NOTE: This patch requires new Gateware! wrs_auxclk will hang switch when using
gateware from last release of switch.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

This patch is to replace previous way of managing ppsi configuration file.
Instead of copying proper file based on chosen configuration PTP_* option in
dot-config, now ppsi.conf file is assembled based on PORTXX_PARAMS fields in
dot-config.

--Kconfig:
  - remove options:
    - PTP_WR_DEFAULT
    - PTP_WR_MASTER
    - PTP_WR_AUTO
    - PTP_WR_AUTO_UDP
    - PTP_NONWR_UDP_ALL
  - add PTP_PORT_PARAMS (to let assembly ppsi.conf file)
  - keep option PTP_CUSTOM to use user's ppsi configuration file
  - move PTP_CUSTOM_FILENAME to different position
  - add property "proto" to PORTXX_PARAMS
--remove predefined ppsi configs (not to be used anymore) from /wr/etc/ppsi-config-pool/:
    - WR_DEFAULT
    - WR_MASTER
    - WR_AUTO
    - WR_AUTO_UDP
    - NONWR_UDP_ALL
--add new script assembly_ppsi_conf.sh to create ppsi.conf file.
  ppsi.conf file is assembled based on PORTXX_PARAMS fields like port name,
  proto(col) and role. All master, slave or auto ports are set to use whiterabbit
  extension
--add file /wr/etc/ppsi-pre.conf to keep top of ppsi.conf including global
  options (later all options may be moved to dot-conf)
--modivy apply_dot-config to use assembly_ppsi_conf.sh instead of old way.

NOTE: update of documentation is missing

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Objects added:
--wrsEndpointStatus
--wrsSwcoreStatus
--wrsRTUStatus

--update MIB
--add parameters to Kconfig

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Update:
--MIB
--Kconfig (update warning temp object name, add info about required hal restart
  after change treshold levels)
--update wrsOSStatus

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Added menu "Management configuration" to Kconfig with:
-moved options from "Local Network Configuration":
 --SNMP_TRAPSINK_ADDRESS
 --SNMP_TRAP2SINK_ADDRESS
 --SNMP_RO_COMMUNITY
 --SNMP_RW_COMMUNITY
-added threshold levels:
 --SNMP_TEMP_THOLD_FPGA
 --SNMP_TEMP_THOLD_PLL
 --SNMP_TEMP_THOLD_PSL
 --SNMP_TEMP_THOLD_PSR

Update user manual.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

SFP matching is done by in order:
-vendor name, part number, serial
-vendor name, part number
-part number

If .config's entry (i.e. serial) is not empty match will happen only with
specific serial.

Additionally:
-Change default defines in Kconfig
-Update user manual with matching info
-Remove entry from wrs-todo about matching SFP vendor

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This commit adds the timing mode to Kconfig, but it is only
used in later commits.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This commit adds fiber parameters to Kconfig. To be used to specify
fiber-specific alpha values.  Use in the next commits.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This commit adds SFP parameters to Kconfig. To be used
in place of the sfp_database.conf.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This commit adds port parameters to Kconfig, using the same
values we currently have in wrsw_hal.conf (i.e: tx delay = 0,
rx delay = 160000 or 161200).

These values are used in later commits, where this dot-config
stuff is replacing wrsw_hal.conf.  The "role=" and "fiber=" values
will be used later, but I'd better write them now to avoid
excessive edits to this file.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

PPSi is not optional, so change Kconfig in order not to run the question.

Also, rename "Local" to "Local Network" configuration.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Now /etc/init.d/S20dot-config is able to download a new dot-config
file if the user specified an URL at configuration time.

We support tftp, http and ftp.  Full documentation in next commit.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

We are now strong with ppsi, remove any reference to ptp-noposix.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

If static IP addressing is used (e.g. using wrboot), it makes sense
to provide a static DNS nameserver.  This option may be useful to
people building a single image to install several switches.

If the configuration string is empty (default) nothing changes (and
/etc/resolv.conf is a symlink to /tmp/resolv.conf, so a dhcp client
can work withint a read-only filesystem).

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

At configuration time, before building, users can select
the ntpserver to be used to prime WR time at boot.  By default
no server is queried.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Developers may want to preserve the filesystem image, to verify the
effect of configuration options, avoiding the need to untar
images/wrs-image.tar.gz every time.

I personally used it to verify the next commits, other people may
prefer to keep it disabled.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

The PPSi daemon can now be selected in Kconfig. This commit
changes configuration and the build scripts to support either of them.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>