Jean-Claude BAU authored 6 years ago and Adam Wujek committed 5 years ago

This new parameter is used to control the configurable parameter
L1SyncOptParamsPortDS.timestampsCorrectedTx when
L1SyncBasicPortDS.optParamsEnabled is set to true.

Jean-Claude BAU authored 6 years ago and Adam Wujek committed 5 years ago

The profile is included in the port instance name. With the new profile
"custom", the port instance name become too big. So only the two first
letters of the profile are now included in the name.

Jean-Claude BAU authored 6 years ago and Adam Wujek committed 5 years ago

- Timeout management
- Configuration enhancement
- Erbest/ebast calculation
Note: The pp_instance structure has changed so all related programs
depending on pp_instance structure must be rebuild.

Jean-Claude BAU authored 6 years ago and Adam Wujek committed 5 years ago

        - Add new config parameters (l1SyncRxCoherencyIsRequired,...)
        - Add new profile: CUSTOM. It will be mostly used for testing
        - Fix issue on state name: "pre_master" instead of "pre-master"

Jean-Claude BAU authored 6 years ago and Adam Wujek committed 5 years ago

Change the format of diplayed data in order to facilitate the extraction
of data with grep like command

Signed-off-by: baujc <jean-claude.bau@cern.ch>
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Jean-Claude BAU authored 6 years ago and Adam Wujek committed 5 years ago

When the WR profile is used ingressLatency and egressLacenty a set to 0
by default. This has to be done to avoid to use twice this values in the
delay calculation (ppsi + hal)

Jean-Claude BAU authored 6 years ago and Adam Wujek committed 5 years ago

As the bitslide is already taken into account in PPSI for all protocol
extensions as the semiStaticLatency, it is no longer needed to use it in
the calculation of delta_rx_phy.

Jean-Claude BAU authored 6 years ago and Adam Wujek committed 5 years ago

These modifications increase the precision of the displayed fraction
part of a RelativeDifference type.

Jean-Claude BAU authored 6 years ago and Adam Wujek committed 5 years ago

- PPSI: See PPSI logs
- wrs_dump_shmem.c: new fields displayed and fix errors for negative
values in time display (TimeInterval, RelativeDifference, pp_time)
Conflicts:
	userspace/ppsi
	userspace/tools/wrs_dump_shmem.c

Jean-Claude BAU authored 6 years ago and Adam Wujek committed 5 years ago

Conflicts:
	userspace/ppsi
	userspace/tools/wrs_dump_shmem.c

Jean-Claude BAU authored 6 years ago and Adam Wujek committed 5 years ago

- Assembly_ppi_conf.sh script is able to generate JSON ppsi.conf format
- New parameters in ppsi.conf. Some parameters moved at ppsi instance
level
- port timing configuration in Kconfig moved in KConfig_port_timing.in
file. A file generator 'gen_kconfig_port_timing.sh'is used to generate
it.
- HAL upgraded to use the new dot-config file format. Mode ( auto,
master,...) removed from HAL.
- ppsi-pre.conf: Set empty because the new generated ppsi.conf always
define clock-class and clock accuracy.

Jean-Claude BAU authored 6 years ago and Adam Wujek committed 5 years ago

Conflicts:
	userspace/ppsi
	userspace/tools/wrs_dump_shmem.c

Jean-Claude BAU authored 6 years ago and Adam Wujek committed 5 years ago

- Upgrade HAL to transmit the bit-slide to HA
- Upgrade wr_mon tool to displat HA servo data
- Upgrade wrs_dump_shmem to display the right data
Conflicts:
	userspace/tools/wr_mon.c
	userspace/tools/wrs_dump_shmem.c

Sven Meier authored 6 years ago and Adam Wujek committed 5 years ago

extensions

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Take the HA first

This reverts commit 74e16153.

Benoit Rat authored 6 years ago and Adam Wujek committed 5 years ago

since v5.0.x the WRS needs more time. We prefer to increase the reboot
time in order to properly refresh the web page after a reboot.

Benoit Rat authored 6 years ago and Adam Wujek committed 5 years ago

Remove the stderr in the shell_execution to improve parsing without the
state of the ports properly.

According to php manual (http://php.net/manual/en/function.strpos.php)
strpos must be used the indentical comperator because strpos can return
0 if string found at position 0.

Benoit Rat authored 6 years ago and Adam Wujek committed 5 years ago

Now we use ajax+js to constantly refresh value of WR into the web
interface without needing to manually refresh the webpage by the user.
However this refresh flood the accesslog and this is a problem with the
small RAM available

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Dump temperature, voltage, bias, TX and RX power from the SFP's DOM area

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

when query OID wrsBootConfigStatus
from:
SNMP: Error wrsBootSuccessful: Unable to read status file for wrsBootConfigStatus
to:
SNMP: Config file is not valid or too short (less than 200 characters)

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

This fixes builds e.g. on ubuntu 18.04

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

DONE: Kconfig, assembly_ppsi_conf.sh
TODO: SNMP, DOCs, HAL?

Redefine options CONFIG_PORTXX_PARAMS in dot-config
--role={master,slave,auto,none}, keep non-wr for compatibility
--ext={WR}:{HR}, HR for future, if no ext defined use WR as default
--add extra option to disable/enable triggering errors in SNMP
--add option for delay mechanism (dm)
  p2p or e2e
  e2e default

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

For rnabling 50ohm termination for 1-PPS input
It is set from HAL.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>