This commit reduces the size of periodic read for each SFP from 256B to 16B.
Since the I2C transfer are bit-banged, this commit reduces CPU
utilization if monitoring of SFPs is used (CONFIG_READ_SFP_DIAG_ENABLE).

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

To be reported by SNMP as SNMPv2-MIB::sysContact.0 and SNMPv2-MIB::sysLocation.0

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

This commit requires uplift of ppsi

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

This version already includes
lldpd support sending LLDP frames over VLAN
and other patches since 1.0.5

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Before it was printed as signed

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <adam.wujek@creotech.pl>

Signed-off-by: Adam Wujek <adam.wujek@creotech.pl>

May be useful to find offsets of structures that are not printed.

Signed-off-by: Adam Wujek <adam.wujek@creotech.pl>

Fixes after ppsi update for WRPC. Should not affect WRS

Signed-off-by: Adam Wujek <adam.wujek@creotech.pl>

Signed-off-by: Adam Wujek <adam.wujek@creotech.pl>

Signed-off-by: Adam Wujek <adam.wujek@creotech.pl>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

After IP-MIB has been enabled, WRS was runnig out of memory after 1-2 months.
SNMP was leaking about 10MB/month of memory. A leak was observed no matter if
and which OIDs were queried.

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Reduce the size of port mask from 65535*8 ports to 16*8 ports for
dot1qVlanCurrentTable and dot1qVlanStaticTable.

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

make rtu_stat to read shmem from another location even when hal is dead

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

There is no visible effect of this since the new line was printed anyway.

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

If there is env variable SHMEM_PATH defined, snmpd will use shmem images from
this directory. This feature might be useful during debugging.

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

--Store build log in a log file. Log size is ~32MB, log limit in gitlab is ~16MB.
--Add log file into artifact archive
--Fix adding wrs-firmware*.tar into artifacts
--Fix a name of artifacts archive to contain job ID
--Use all available cores on a build machine

Export a subset of BRIDGE-MIB and Q-BRIDGE-MIB

Implemented OIDs:
dot1dBase:
 --dot1dBaseBridgeAddress
 --dot1dBaseNumPorts
 --dot1dBaseType
dot1dBasePortTable:
 --dot1dBasePortIfIndex
 --dot1dBasePortCircuit
dot1dTpFdbTable:
 --dot1dTpFdbAddress
 --dot1dTpFdbPort
 --dot1dTpFdbStatus
dot1dStaticTable:
 --dot1dStaticAddress
 --dot1dStaticReceivePort
 --dot1dStaticAllowedToGoTo
 --dot1dStaticStatus
dot1qBase:
 --dot1qVlanVersionNumber
 --dot1qMaxVlanId
 --dot1qMaxSupportedVlans
 --dot1qNumVlans
 --dot1qGvrpStatus
dot1qFdbTable:
 --dot1qFdbDynamicCount
dot1qTpFdbTable:
 --dot1qTpFdbPort
 --dot1qTpFdbStatus
dot1qVlanCurrentTable:
 --dot1qVlanFdbId
 --dot1qVlanCurrentEgressPorts
 --dot1qVlanCurrentUntaggedPorts
 --dot1qVlanStatus
 --dot1qVlanCreationTime
dot1qVlanStaticTable:
 --dot1qVlanStaticName
 --dot1qVlanStaticEgressPorts
 --dot1qVlanForbiddenEgressPorts
 --dot1qVlanStaticUntaggedPorts
 --dot1qVlanStaticRowStatus
dot1qPortVlanTable:
 --dot1qPvid
 --dot1qPortAcceptableFrameTypes
 --dot1qPortIngressFiltering
 --dot1qPortGvrpStatus
 --dot1qPortGvrpFailedRegistrations
 --dot1qPortGvrpLastPduOrigin
 --dot1qPortRestrictedVlanRegistration

Signed-off-by: Michal Wasiak <michal.wasiak@gmail.com>

Signed-off-by: Michal Wasiak <michal.wasiak@gmail.com>

Signed-off-by: Michal Wasiak <michal.wasiak@gmail.com>

To be used by SNMP

Signed-off-by: Michal Wasiak <michal.wasiak@gmail.com>