Until now configuration items like WRS_LOG_HAL could change only loglevel of
syslog messages, not the verbosity of the program.

Please note that all messages produced by programs if syslog is
configured will be passed to the syslog at the same <facility>.<level>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Move ppsi VLAN configuration from PORTXX_PARAMS(ppsi_vlans) to
VLANS_PORTXX_VID_PTP

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Complement of a commit:
02bb6153

 rootfs: use /etc/ppsi.conf not /wr/etc/ppsi.conf

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Kconfig:
--add CONFIG_READ_SFP_DIAG_ENABLE
libwr:
--add the function shw_sfp_update_dom to update only needed values in the future
--increase HAL_SHMEM_VERSION due to the changes in structures
wrs_dump_shmem
--add new fields
HAL:
--read DOM (Diagnostic Monitoring data) from SFP's eeprom at plug and once
  per second
PPSI:
--uplift hal shmem header
wrs_sfp_dump:
--support reading SFP's DOM from HAL

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Add to Kconfig:
--RTU_HP_MASK_ENABLE
--RTU_HP_MASK_VAL

Update wrs_vlans:
--add parameter --hpmask
--read RTU_HP_MASK_* from dot-config
--print hpmask with plist

add a new minipc call rtud_export_hp_mask for HP mask

Update wrs-user-manual
Update wrs-developer-manual
Update webinterface

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Update vlan.sh init script to let wrs_vlans to read configuration from
the dot-config.

Remove vlan_config.sh since it is not used anymore.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Specify vlans for ppsi in dot-config's field PORTXX_PARAMS.
Use ppsi_vlans for that, with a colon separated list.
PORTXX_PARAMS="...,ppsi_vlans=1:2:9"

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Keep all VLAN related configuration in the Kconfig_vlans.in.
Source this file in the Kconfig
Also copy it to the target.
Kconfig_vlans.in is generated by a command:
userspace/host_tools/gen_vlan_kconf.sh > Kconfig_vlans.in

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

This will allow users to have special configuration (that is not possible to
achieve by just using dot-config) without a need to manually handle custom
script.

The script can be used from /wr/bin/custom_boot_script.sh or downloaded during
the boot. It is not possible to execute a script which was downloaded during
the previous boot. But a script can be written in such way to copy itself to
/wr/bin/custom_boot_script.sh.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Improve documentation of throttling's settings in the dot-config.
In the wrs-user-manual and in the Kconfig.

Supplements:
Merge branch 'greg-throttling'

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Allow to specify hostname in the dot-config URL and in PPSI URL.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

It is much more readable to have "port X" than "further port" in
the Kconfig.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Description was outdated because ppsi config is generated based on
the PORTXX_PARAMS not TIME_XX.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

An alternative to "set -o pipefail" in the
userspace/rootfs_override/etc/init.d/wrs_auxclk.sh is ${PIPESTATUS[0]},
but this is a bashism.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Add startup script /etc/init.d/wrs_throttling.sh for setting up throttling

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

wrs_watchdog will use WRS_LOG_OTHER instead of WRS_LOG_WRSWATCHDOG as a
destination for logs.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Improve wrs-user-manual and Kconfig

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

--Part of changing names of interfaces in WRS from wrX (wr0-17) to
  wriX (wri1-wri18).
--Rename wr0 to wri1 in help

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Hostname can be configured in dot-config to be set via DHCP or statically.

Additionally update documentation.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Make default log level as "Warning". By this don't print that SNMP packet was
received.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Maciej Lipinski authored 9 years ago and Adam Wujek committed 9 years ago

Added ZyXEL SFPs to database (not yet fully tested for synch)
These SFPs are used in Btrain, if not in database, SNMP shows critical
error

force-dhcp can be used to retrieve a URL to the dot-config, which is downloaded
during boot.
try-dhcp the same as above but don't complain about unsuccessful receive of the
URL via DHCP to SNMP.

Update:
--MIB - add tryDhcp and forceDhcp to the wrsConfigSource object; add
        dhcpError to the wrsBootConfigStatus object
--SNMPd - same as the above; don't error in wrsBootConfigStatus when tryDhcp
          fails
--dot-config's script - support new dot-config sources
--Kconfig - support new dot-config sources
--wrs_failures
--wrs-user-manual
--wrs_release_defconfig - add new items
--create new script for udhcpc to save "filename" configuration field retrieved
  from DHCP server; it contains the URL to the dot-config to be downloaded.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

The new Kconfig option allows dowloading ppsi.conf at boot time, from
TFTP or otherwise.  The filename in the URL can include IPADDR and/or
MACADDR, so the same configuration string can be used to set up a
batch of switches with different configurations.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

--Add destiantion to watchdog log to Kconfig
--update documentation

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

--Update /etc/init.d/network script.
Keeping lo up prevents monit from restarting dropbear and lighttpd,
then finally rebooting system due to exceeded number of maximum application's
restarts.
--keep lo ocnfiguration in /etc/network/interfaces due to above
--Update user manual

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Update Kconfig
Update user-manual
Update monit's init script

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Update Kconfig
Update user-manual
Update snmpd's init script

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

When monit is started from inittab instead of script /etc/init.d/monit.sh
it will be respawned after its crash.
Support stopping/starting monit by /etc/init.d/monit.sh
To stop monit, STOP signal is sent to it. By this, init will not respawn monit,
because it is still present in process' list.
Add disabling monit in dot-config by option CONFIG_MONIT_DISABLE.
When monit is disabled by dot-config, monit.sh will sleep forever, to
satisfy init and prevent respawning
Update dot-config items in user-manual.

Include only *.conf instead of all files from /etc/monit.d/.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Added init script /etc/init.d/S70wrs_auxclk to start wrs_auxclk with parameters
read from dot-config.

Added parameters to Kconfig:
--WRSAUXCLK_FREQ
--WRSAUXCLK_DUTY
--WRSAUXCLK_CSHIFT
--WRSAUXCLK_SIGDEL
--WRSAUXCLK_PPSHIFT
All above are used as parameters to wrs_auxclk,
which configure external clock clk2

NOTE: This patch requires new Gateware! wrs_auxclk will hang switch when using
gateware from last release of switch.

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

This patch is to replace previous way of managing ppsi configuration file.
Instead of copying proper file based on chosen configuration PTP_* option in
dot-config, now ppsi.conf file is assembled based on PORTXX_PARAMS fields in
dot-config.

--Kconfig:
  - remove options:
    - PTP_WR_DEFAULT
    - PTP_WR_MASTER
    - PTP_WR_AUTO
    - PTP_WR_AUTO_UDP
    - PTP_NONWR_UDP_ALL
  - add PTP_PORT_PARAMS (to let assembly ppsi.conf file)
  - keep option PTP_CUSTOM to use user's ppsi configuration file
  - move PTP_CUSTOM_FILENAME to different position
  - add property "proto" to PORTXX_PARAMS
--remove predefined ppsi configs (not to be used anymore) from /wr/etc/ppsi-config-pool/:
    - WR_DEFAULT
    - WR_MASTER
    - WR_AUTO
    - WR_AUTO_UDP
    - NONWR_UDP_ALL
--add new script assembly_ppsi_conf.sh to create ppsi.conf file.
  ppsi.conf file is assembled based on PORTXX_PARAMS fields like port name,
  proto(col) and role. All master, slave or auto ports are set to use whiterabbit
  extension
--add file /wr/etc/ppsi-pre.conf to keep top of ppsi.conf including global
  options (later all options may be moved to dot-conf)
--modivy apply_dot-config to use assembly_ppsi_conf.sh instead of old way.

NOTE: update of documentation is missing

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>