Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Converter script can be run:
- on WRS
- in the repo directory (userspace/host_tools/dot-config_converter_6_x_to_7_0.sh)
- in standalone mode (run "make converter_standalone" to prepare it)

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Please note, this commit changes the order in which options bytes are
displayed.

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Give up after 100x100=10s.

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Fix reporting of BRIDGE-MIB::dot1dBasePortIfIndex if VLAN (e.g., wri2.10)
or virtual interfaces (e.g., wri2:0) are present in the system.

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Remove _VAL entries from Kconfig*. Replace with a syntax:
prompt "" if XXX

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

It is good to have this command being executed, but build shall not fail
if this command is missing.

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

There is a tool wrs_status_led to set status LED, so use it (at boot time).

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Compiled from commit 1b32dbb5 of wrpc-sw repository.

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Check if head is not NULL

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

[FEATURE: #148

] userspace/tools/wrs_ext_pps_latency: Support aligning the PPS out to PPS input in GM

1. Add new paramter CONFIG_EXT_PPS_LATENCY_PS in dot-config.
   Calibration is needed to align the PPS out to PPS input in GM mode.
2. Add new variable ext_pps_latency_ps in struct spll_stats, using it
   to transfer the ext_pps_latency parameter to WRPC-SW.
3. Change SPLL_STATS_VER to 4, modify the related function.
4. (deleted from the commit)
   Add a new tool function: wrs_ext_pps_latency, which will change
   the Main PLL phase shift in GM mode, according to the parameter
   CONFIG_EXT_PPS_LATENCY_PS in dot-config. Add this new function to
   startup-mb.sh, making it autostart.

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

So far only to control offset between PPS-in and PPS-out in GM mode

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

update wrsfl_release_defconfig
(Removed from the original commit) update tx_phase_cal.conf

Signed-off-by: Adam Wujek <dev_public@wujek.eu>