Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Add:
--Enabling Jumbo Frames
--Enabling transmit regardless of whether a valid link has been established
--Disabling Autonegotiation

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

This avoids error printouts from HAL when no instances are configured on
a given port.

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Instead, warn only on the increase of wrsSpllDelCnt.

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Fix:
-Correct display of live information
-Display of temperatures in dashboard
-Display of Firmware version in dashboard

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Delay monit start by extra 60 seconds.

The delay of snmpd start was put into background because /etc/init.d/rcK
cannot be started before /etc/init.d/rcS is finished. Such behavior is
implemented in the init.

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

delayCoefficient is read from HAL

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Add wrsSystemClockDriftUs (in microseconds) as int32. There is no need
to export this value as int64, with greater values of the offset
the exact information about the offset is not needed.

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

To avoid version mismatch.

Requires following commit from ppsi
wrs-arch: move ptpd_exports.h from wr-switch-sw repo as ppsi_exports.h

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

/etc/init.d/wr_date gets parameter "ppsi" to avoid redirect of the
output and setting the date from /update/saved_date if unable to get
the data via ntp.

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Don't kill other ntpd instances.

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

This fix solves the problem of jumps of a fraction of a second during
the startup. It is believed that the problem is in HDL, this commit is
just a workaround implemented in software.

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Disable web interface in the default config due to security
vulnerabilities described in CVE-2023-22577.

Please note that web interface can still be enabled manually in the
config file in runtime.

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Running fsm_generic_run in hal_port_state_fsm_init_all delays setting
shmemState as HAL_SHMEM_STATE_INITITALIZED, which causes the timeout
(and exit) at the startup of wrsw_rtud. wrsw_rtud is restarted by
monit. However, wrs_vlans is run only once by init and is not able to setup
correctly VLAN configurationi when wrsw_rtud is not running.
The issue is related to the suspected bug #261

.

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Reduce the possible range in Kconfig to the half of the possible range.
E.g. setting job to be run every 40minutes is not trivial and */40 will
not work. Instead it will run the job at minute 0, then 40, then again
at 0 (after 40min, then after 20min).

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

And fix two typos in the script itself

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Before the fix in some rare cases, radiusvlan could report a receive
of frames from another interface. This could lead to a wrong
authentication of a device connected to a port.

The problem is caused by a behaviour that if a socket is created it
listens on all interfaces until the bind function is called. It might
happen that later calls of recvfrom function will handle frames
received from other interfaces. To prevent that, radiusvlan flushes
all frames received before socket is bound to an interface.
The lost of frames is meaningless since all frames that radiusvlan
listens for are sent periodically.

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Print exact command which is or would be run to change VLAN
configuration.

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

In dry run mode no changes to the VLAN configuration are applied.

Signed-off-by: Adam Wujek <dev_public@wujek.eu>

Remove superfluous spaces when generating Kconfig_port_timing.in by gen_kconfig_port_timing.sh

Signed-off-by: Adam Wujek <dev_public@wujek.eu>