doc/wrs_failures: add vspace to the style instead of each description

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

doc/wrs_failures/snmp_objects.tex

@@ -25,7 +25,7 @@
   \snmpentrys{WR-SWITCH-MIB}{wrsGeneralStatusGroup}{wrsNetworkingStatus}{
     Collective status of the Ethernet switching subsystem. In case of an error
     or warning, please check status objects in the
-    \texttt{\glshyperlink{WR-SWITCH-MIB::wrsNetworkingStatusGroup}}.\vspace{12pt}}
+    \texttt{\glshyperlink{WR-SWITCH-MIB::wrsNetworkingStatusGroup}}.}
 
 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
 \snmpentrys{WR-SWITCH-MIB}{}{wrsDetailedStatusesGroup}{
@@ -55,7 +55,7 @@
       \item Restart the switch
       \item Please consult WR experts if the problem persists.
     \end{pck_proc}
-    \glspar \underline{Related problems:}\vspace{12pt}}
+    \glspar \underline{Related problems:}}
 
   \snmpentrys{WR-SWITCH-MIB}{wrsOSStatusGroup}{wrsTemperatureWarning}{
     \underline{Description:}
@@ -72,7 +72,7 @@
       \item Replace the switch with a new unit and consult the WR Switch
         manufacturer for a repair.
     \end{pck_proc}
-    \glspar \underline{Related problems:}\vspace{12pt}}
+    \glspar \underline{Related problems:}}
 
   \snmpentrys{WR-SWITCH-MIB}{wrsOSStatusGroup}{wrsMemoryFreeLow}{
     \underline{Description:}
@@ -85,7 +85,7 @@
       \item Send the dumped state of the switch to WR experts for analysis as
         this might mean there is some internal problem in the WRS firmware.
     \end{pck_proc}
-    \glspar \underline{Related problems:}\vspace{12pt}}
+    \glspar \underline{Related problems:}}
 
   \snmpentrys{WR-SWITCH-MIB}{wrsOSStatusGroup}{wrsCpuLoadHigh}{
     \underline{Description:}
@@ -99,7 +99,7 @@
       \item Send the dumped state of the switch to WR experts for analysis as
         this might mean there is some internal problem in the WRS firmware.
     \end{pck_proc}
-    \glspar \underline{Related problems:}\vspace{12pt}}
+    \glspar \underline{Related problems:}}
 
 	\snmpentrys{WR-SWITCH-MIB}{wrsOSStatusGroup}{wrsDiskSpaceLow}{
     \underline{Description:}
@@ -118,13 +118,13 @@
       \item Send the dumped state of the switch to WR experts for analysis as
         this might mean there is some internal problem in the WRS firmware.
     \end{pck_proc}
-    \glspar \underline{Related problems:}\vspace{12pt}}
+    \glspar \underline{Related problems:}}
 
   %------------------------------------------------------------------------
 
   \snmpentrys{WR-SWITCH-MIB}{wrsDetailedStatusesGroup}{wrsTimingStatusGroup} {
     \underline{Description:}
-    Group with collective statuses of the timing subsystem.} %\vspace{12pt}}
+    Group with collective statuses of the timing subsystem.} %}
 
   \snmpentrys{WR-SWITCH-MIB}{wrsTimingStatusGroup}{wrsPTPStatus}{
     \underline{Description:}
@@ -153,7 +153,7 @@
       \item If the problem persists replace the switch with a new unit.
         %(see \ref{cern:wrs_replacement}).
     \end{pck_proc}
-    \glspar \underline{Related problems:}\vspace{12pt}}
+    \glspar \underline{Related problems:}}
 
   \snmpentrys{WR-SWITCH-MIB}{wrsTimingStatusGroup}{wrsSoftPLLStatus}{
     \underline{Description:}
@@ -192,7 +192,7 @@
       \item If the problem persists, replace the switch with a new unit.
         %(see \ref{cern:wrs_replacement}).
     \end{pck_proc}
-    \glspar \underline{Related problems:}\vspace{12pt}}
+    \glspar \underline{Related problems:}}
 
   \snmpentrys{WR-SWITCH-MIB}{wrsTimingStatusGroup}{wrsSlaveLinksStatus}{
     \underline{Description:}
@@ -222,7 +222,7 @@
       \item Replace the faulty switch with a new unit, if this does not solve
         the problem, make sure your fiber link is not broken.
     \end{pck_proc}
-    \glspar \underline{Related problems:}\vspace{12pt}}
+    \glspar \underline{Related problems:}}
 
   \snmpentrys{WR-SWITCH-MIB}{wrsTimingStatusGroup}{wrsPTPFramesFlowing}{
     \underline{Description:}
@@ -244,13 +244,13 @@
       \item If the problem persists, please contact WR experts for in-depth
         investigation.
     \end{pck_proc}
-    \glspar \underline{Related problems:}\vspace{12pt}}
+    \glspar \underline{Related problems:}}
 
   %------------------------------------------------------------------------
 
   \snmpentrys{WR-SWITCH-MIB}{wrsDetailedStatusesGroup}{wrsNetworkingStatusGroup}{
     \underline{Description:}
-    Group with collective statuses of the networking subsystem.\vspace{12pt}}
+    Group with collective statuses of the networking subsystem.}
 
   \snmpentrys{WR-SWITCH-MIB}{wrsNetworkingStatusGroup}{wrsSFPsStatus}{
     \underline{Description:}
@@ -273,7 +273,7 @@
       \item Otherwise, you should use a WR-supported SFP module and make sure it
         is declared together with calibration values in the WRS configuration.
     \end{pck_proc}
-    \glspar \underline{Related problems:}\vspace{12pt}}
+    \glspar \underline{Related problems:}}
 
   \snmpentrys{WR-SWITCH-MIB}{wrsNetworkingStatusGroup}{wrsEndpointStatus}{
     \underline{Description:}
@@ -292,7 +292,7 @@
       \item If the problem persists, please contact WR experts for in-depth
         investigation.
     \end{pck_proc}
-    \glspar \underline{Related problems:}\vspace{12pt}}
+    \glspar \underline{Related problems:}}
 
   \snmpentrys{WR-SWITCH-MIB}{wrsNetworkingStatusGroup}{wrsSwcoreStatus}{
     \underline{Description:}
@@ -307,7 +307,7 @@
         too much high priority traffic in your network, or there is some
         internal problem in the WRS firmware.
     \end{pck_proc}
-    \glspar \underline{Related problems:}\vspace{12pt}}
+    \glspar \underline{Related problems:}}
 
   \snmpentrys{WR-SWITCH-MIB}{wrsNetworkingStatusGroup}{wrsRTUStatus}{
     \underline{Description:}
@@ -322,7 +322,7 @@
         through your switch. If possible in your application, try using larger
         Ethernet frames with lower load to transfer information.
     \end{pck_proc}
-    \glspar \underline{Related problems:}\vspace{12pt}}
+    \glspar \underline{Related problems:}}
 
   %------------------------------------------------------------------------
 

doc/wrs_failures/wrs_failures.tex

@@ -188,7 +188,7 @@
     \setlist[enumerate]{leftmargin=\paraaindent}
     --\kern 0.33em\glsentryitem{##1}\glstreenamefmt{\glstarget{##1}{\texttt{\textmd{\glsentryuseri{##1}}::}\glossentryname{##1}}}%
     \ifglshassymbol{##1}{\kern 0.33em(\glossentrysymbol{##1})}{}%
-    \glossentrydesc{##1}\glspostdescription\kern 0.33em##2\par
+    \glossentrydesc{##1}\glspostdescription\kern 0.33em##2\par\vspace{12pt}
   }%
   \renewcommand{\subglossentry}[3]{%
     \hangindent##1\glstreeindent\relax
@@ -206,7 +206,7 @@
     \fi
     \glstreenamefmt{\glstarget{##2}{\glossentryname{##2}}}%
     \ifglshassymbol{##2}{\kern 0.33em(\glossentrysymbol{##2})}{}%
-    \glossentrydesc{##2}\glspostdescription\kern 0.33em##3\par
+    \glossentrydesc{##2}\glspostdescription\kern 0.33em##3\par\vspace{12pt}
   }%
   %redefine \glspar to support indentation in many paragraphs
   \renewcommand{\glspar}{%