Kconfig_sfp_fiber.in

menu "SFP and Media Timing Configuration"

config N_SFP_ENTRIES
	int "Number of SFP entries in SFP configuration DB"
	range 0  18
	default  6
	help
	This parameter defines the number of SFP entries
	that can be set in the configuration database
	Increase this number to add a new SFP entry.

menu "SFPs configuration DB"

config SFP00_PARAMS
	string "Parameters for SFP 0"
	depends on  N_SFP_ENTRIES=1 || N_SFP_ENTRIES=2 || N_SFP_ENTRIES=3 || N_SFP_ENTRIES=4 || N_SFP_ENTRIES=5 || N_SFP_ENTRIES=6 || N_SFP_ENTRIES=7 || N_SFP_ENTRIES=8 || N_SFP_ENTRIES=9 || N_SFP_ENTRIES=10 || N_SFP_ENTRIES=11 || N_SFP_ENTRIES=12 || N_SFP_ENTRIES=13 || N_SFP_ENTRIES=14 || N_SFP_ENTRIES=15 || N_SFP_ENTRIES=16 || N_SFP_ENTRIES=17 || N_SFP_ENTRIES=18
	default "vn=Axcen Photonics,pn=AXGE-1254-0531,tx=0,rx=0,wl_txrx=1310+1490"
	help
	This parameter, and the following ones, are used to
	configure the timing parameters of a specific SFP
	transceiver. The transceiver name is autodected for each port
	in the White Rabbit Switch, and you need one configuration
	entry for each transceiver type that is installed in your
	device.
	vn (optional) - Vendor Name of an SFP
	pn - Part Number of an SFP
	vs (optional) - Vendor Serial (serial number) of an SFP
	tx - TX delay of an SFP
	rx - RX delay of an SFP
	wl_txrx - Tx wavelength separated by + with Rx wavelength of an SFP;
	for example wl_txrx=1490+1310
	To set a new SFP entry, increment the parameter 
	"Number of SFP entries in SFP configuration DB" in the upper menu.

config SFP01_PARAMS
	string "Parameters for SFP 1"
	depends on  N_SFP_ENTRIES=2 || N_SFP_ENTRIES=3 || N_SFP_ENTRIES=4 || N_SFP_ENTRIES=5 || N_SFP_ENTRIES=6 || N_SFP_ENTRIES=7 || N_SFP_ENTRIES=8 || N_SFP_ENTRIES=9 || N_SFP_ENTRIES=10 || N_SFP_ENTRIES=11 || N_SFP_ENTRIES=12 || N_SFP_ENTRIES=13 || N_SFP_ENTRIES=14 || N_SFP_ENTRIES=15 || N_SFP_ENTRIES=16 || N_SFP_ENTRIES=17 || N_SFP_ENTRIES=18
	default "vn=Axcen Photonics,pn=AXGE-3454-0531,tx=0,rx=0,wl_txrx=1490+1310"
	help
	This parameter, and the following ones, are used to
	configure the timing parameters of a specific SFP
	transceiver. The transceiver name is autodected for each port
	in the White Rabbit Switch, and you need one configuration
	entry for each transceiver type that is installed in your
	device.
	vn (optional) - Vendor Name of an SFP
	pn - Part Number of an SFP
	vs (optional) - Vendor Serial (serial number) of an SFP
	tx - TX delay of an SFP
	rx - RX delay of an SFP
	wl_txrx - Tx wavelength separated by + with Rx wavelength of an SFP;
	for example wl_txrx=1490+1310
	To set a new SFP entry, increment the parameter 
	"Number of SFP entries in SFP configuration DB" in the upper menu.

config SFP02_PARAMS
	string "Parameters for SFP 2"
	depends on  N_SFP_ENTRIES=3 || N_SFP_ENTRIES=4 || N_SFP_ENTRIES=5 || N_SFP_ENTRIES=6 || N_SFP_ENTRIES=7 || N_SFP_ENTRIES=8 || N_SFP_ENTRIES=9 || N_SFP_ENTRIES=10 || N_SFP_ENTRIES=11 || N_SFP_ENTRIES=12 || N_SFP_ENTRIES=13 || N_SFP_ENTRIES=14 || N_SFP_ENTRIES=15 || N_SFP_ENTRIES=16 || N_SFP_ENTRIES=17 || N_SFP_ENTRIES=18
	default "vn=APAC Opto,pn=LS38-C3S-TC-N-B9,tx=761,rx=557,wl_txrx=1310+1490"
	help
	This parameter, and the following ones, are used to
	configure the timing parameters of a specific SFP
	transceiver. The transceiver name is autodected for each port
	in the White Rabbit Switch, and you need one configuration
	entry for each transceiver type that is installed in your
	device.
	vn (optional) - Vendor Name of an SFP
	pn - Part Number of an SFP
	vs (optional) - Vendor Serial (serial number) of an SFP
	tx - TX delay of an SFP
	rx - RX delay of an SFP
	wl_txrx - Tx wavelength separated by + with Rx wavelength of an SFP;
	for example wl_txrx=1490+1310
	To set a new SFP entry, increment the parameter 
	"Number of SFP entries in SFP configuration DB" in the upper menu.

config SFP03_PARAMS
	string "Parameters for SFP 3"
	depends on  N_SFP_ENTRIES=4 || N_SFP_ENTRIES=5 || N_SFP_ENTRIES=6 || N_SFP_ENTRIES=7 || N_SFP_ENTRIES=8 || N_SFP_ENTRIES=9 || N_SFP_ENTRIES=10 || N_SFP_ENTRIES=11 || N_SFP_ENTRIES=12 || N_SFP_ENTRIES=13 || N_SFP_ENTRIES=14 || N_SFP_ENTRIES=15 || N_SFP_ENTRIES=16 || N_SFP_ENTRIES=17 || N_SFP_ENTRIES=18
	default "vn=APAC Opto,pn=LS48-C3S-TC-N-B4,tx=-29,rx=507,wl_txrx=1490+1310"
	help
	This parameter, and the following ones, are used to
	configure the timing parameters of a specific SFP
	transceiver. The transceiver name is autodected for each port
	in the White Rabbit Switch, and you need one configuration
	entry for each transceiver type that is installed in your
	device.
	vn (optional) - Vendor Name of an SFP
	pn - Part Number of an SFP
	vs (optional) - Vendor Serial (serial number) of an SFP
	tx - TX delay of an SFP
	rx - RX delay of an SFP
	wl_txrx - Tx wavelength separated by + with Rx wavelength of an SFP;
	for example wl_txrx=1490+1310
	To set a new SFP entry, increment the parameter 
	"Number of SFP entries in SFP configuration DB" in the upper menu.

config SFP04_PARAMS
	string "Parameters for SFP 4"
	depends on  N_SFP_ENTRIES=5 || N_SFP_ENTRIES=6 || N_SFP_ENTRIES=7 || N_SFP_ENTRIES=8 || N_SFP_ENTRIES=9 || N_SFP_ENTRIES=10 || N_SFP_ENTRIES=11 || N_SFP_ENTRIES=12 || N_SFP_ENTRIES=13 || N_SFP_ENTRIES=14 || N_SFP_ENTRIES=15 || N_SFP_ENTRIES=16 || N_SFP_ENTRIES=17 || N_SFP_ENTRIES=18
	default "vn=ZyXEL,pn=SFP-BX1490-10-D,tx=0,rx=0,wl_txrx=1490+1310"
	help
	This parameter, and the following ones, are used to
	configure the timing parameters of a specific SFP
	transceiver. The transceiver name is autodected for each port
	in the White Rabbit Switch, and you need one configuration
	entry for each transceiver type that is installed in your
	device.
	vn (optional) - Vendor Name of an SFP
	pn - Part Number of an SFP
	vs (optional) - Vendor Serial (serial number) of an SFP
	tx - TX delay of an SFP
	rx - RX delay of an SFP
	wl_txrx - Tx wavelength separated by + with Rx wavelength of an SFP;
	for example wl_txrx=1490+1310
	To set a new SFP entry, increment the parameter 
	"Number of SFP entries in SFP configuration DB" in the upper menu.

config SFP05_PARAMS
	string "Parameters for SFP 5"
	depends on  N_SFP_ENTRIES=6 || N_SFP_ENTRIES=7 || N_SFP_ENTRIES=8 || N_SFP_ENTRIES=9 || N_SFP_ENTRIES=10 || N_SFP_ENTRIES=11 || N_SFP_ENTRIES=12 || N_SFP_ENTRIES=13 || N_SFP_ENTRIES=14 || N_SFP_ENTRIES=15 || N_SFP_ENTRIES=16 || N_SFP_ENTRIES=17 || N_SFP_ENTRIES=18
	default "vn=ZyXEL,pn=SFP-BX1310-10-D,tx=0,rx=0,wl_txrx=1310+1490"
	help
	This parameter, and the following ones, are used to
	configure the timing parameters of a specific SFP
	transceiver. The transceiver name is autodected for each port
	in the White Rabbit Switch, and you need one configuration
	entry for each transceiver type that is installed in your
	device.
	vn (optional) - Vendor Name of an SFP
	pn - Part Number of an SFP
	vs (optional) - Vendor Serial (serial number) of an SFP
	tx - TX delay of an SFP
	rx - RX delay of an SFP
	wl_txrx - Tx wavelength separated by + with Rx wavelength of an SFP;
	for example wl_txrx=1490+1310
	To set a new SFP entry, increment the parameter 
	"Number of SFP entries in SFP configuration DB" in the upper menu.

config SFP06_PARAMS
	string "Parameters for SFP 6"
	depends on  N_SFP_ENTRIES=7 || N_SFP_ENTRIES=8 || N_SFP_ENTRIES=9 || N_SFP_ENTRIES=10 || N_SFP_ENTRIES=11 || N_SFP_ENTRIES=12 || N_SFP_ENTRIES=13 || N_SFP_ENTRIES=14 || N_SFP_ENTRIES=15 || N_SFP_ENTRIES=16 || N_SFP_ENTRIES=17 || N_SFP_ENTRIES=18
	default ""
	help
	This parameter, and the following ones, are used to
	configure the timing parameters of a specific SFP
	transceiver. The transceiver name is autodected for each port
	in the White Rabbit Switch, and you need one configuration
	entry for each transceiver type that is installed in your
	device.
	vn (optional) - Vendor Name of an SFP
	pn - Part Number of an SFP
	vs (optional) - Vendor Serial (serial number) of an SFP
	tx - TX delay of an SFP
	rx - RX delay of an SFP
	wl_txrx - Tx wavelength separated by + with Rx wavelength of an SFP;
	for example wl_txrx=1490+1310
	To set a new SFP entry, increment the parameter 
	"Number of SFP entries in SFP configuration DB" in the upper menu.

config SFP07_PARAMS
	string "Parameters for SFP 7"
	depends on  N_SFP_ENTRIES=8 || N_SFP_ENTRIES=9 || N_SFP_ENTRIES=10 || N_SFP_ENTRIES=11 || N_SFP_ENTRIES=12 || N_SFP_ENTRIES=13 || N_SFP_ENTRIES=14 || N_SFP_ENTRIES=15 || N_SFP_ENTRIES=16 || N_SFP_ENTRIES=17 || N_SFP_ENTRIES=18
	default ""
	help
	This parameter, and the following ones, are used to
	configure the timing parameters of a specific SFP
	transceiver. The transceiver name is autodected for each port
	in the White Rabbit Switch, and you need one configuration
	entry for each transceiver type that is installed in your
	device.
	vn (optional) - Vendor Name of an SFP
	pn - Part Number of an SFP
	vs (optional) - Vendor Serial (serial number) of an SFP
	tx - TX delay of an SFP
	rx - RX delay of an SFP
	wl_txrx - Tx wavelength separated by + with Rx wavelength of an SFP;
	for example wl_txrx=1490+1310
	To set a new SFP entry, increment the parameter 
	"Number of SFP entries in SFP configuration DB" in the upper menu.

config SFP08_PARAMS
	string "Parameters for SFP 8"
	depends on  N_SFP_ENTRIES=9 || N_SFP_ENTRIES=10 || N_SFP_ENTRIES=11 || N_SFP_ENTRIES=12 || N_SFP_ENTRIES=13 || N_SFP_ENTRIES=14 || N_SFP_ENTRIES=15 || N_SFP_ENTRIES=16 || N_SFP_ENTRIES=17 || N_SFP_ENTRIES=18
	default ""
	help
	This parameter, and the following ones, are used to
	configure the timing parameters of a specific SFP
	transceiver. The transceiver name is autodected for each port
	in the White Rabbit Switch, and you need one configuration
	entry for each transceiver type that is installed in your
	device.
	vn (optional) - Vendor Name of an SFP
	pn - Part Number of an SFP
	vs (optional) - Vendor Serial (serial number) of an SFP
	tx - TX delay of an SFP
	rx - RX delay of an SFP
	wl_txrx - Tx wavelength separated by + with Rx wavelength of an SFP;
	for example wl_txrx=1490+1310
	To set a new SFP entry, increment the parameter 
	"Number of SFP entries in SFP configuration DB" in the upper menu.

config SFP09_PARAMS
	string "Parameters for SFP 9"
	depends on  N_SFP_ENTRIES=10 || N_SFP_ENTRIES=11 || N_SFP_ENTRIES=12 || N_SFP_ENTRIES=13 || N_SFP_ENTRIES=14 || N_SFP_ENTRIES=15 || N_SFP_ENTRIES=16 || N_SFP_ENTRIES=17 || N_SFP_ENTRIES=18
	default ""
	help
	This parameter, and the following ones, are used to
	configure the timing parameters of a specific SFP
	transceiver. The transceiver name is autodected for each port
	in the White Rabbit Switch, and you need one configuration
	entry for each transceiver type that is installed in your
	device.
	vn (optional) - Vendor Name of an SFP
	pn - Part Number of an SFP
	vs (optional) - Vendor Serial (serial number) of an SFP
	tx - TX delay of an SFP
	rx - RX delay of an SFP
	wl_txrx - Tx wavelength separated by + with Rx wavelength of an SFP;
	for example wl_txrx=1490+1310
	To set a new SFP entry, increment the parameter 
	"Number of SFP entries in SFP configuration DB" in the upper menu.

config SFP10_PARAMS
	string "Parameters for SFP 10"
	depends on  N_SFP_ENTRIES=11 || N_SFP_ENTRIES=12 || N_SFP_ENTRIES=13 || N_SFP_ENTRIES=14 || N_SFP_ENTRIES=15 || N_SFP_ENTRIES=16 || N_SFP_ENTRIES=17 || N_SFP_ENTRIES=18
	default ""
	help
	This parameter, and the following ones, are used to
	configure the timing parameters of a specific SFP
	transceiver. The transceiver name is autodected for each port
	in the White Rabbit Switch, and you need one configuration
	entry for each transceiver type that is installed in your
	device.
	vn (optional) - Vendor Name of an SFP
	pn - Part Number of an SFP
	vs (optional) - Vendor Serial (serial number) of an SFP
	tx - TX delay of an SFP
	rx - RX delay of an SFP
	wl_txrx - Tx wavelength separated by + with Rx wavelength of an SFP;
	for example wl_txrx=1490+1310
	To set a new SFP entry, increment the parameter 
	"Number of SFP entries in SFP configuration DB" in the upper menu.

config SFP11_PARAMS
	string "Parameters for SFP 11"
	depends on  N_SFP_ENTRIES=12 || N_SFP_ENTRIES=13 || N_SFP_ENTRIES=14 || N_SFP_ENTRIES=15 || N_SFP_ENTRIES=16 || N_SFP_ENTRIES=17 || N_SFP_ENTRIES=18
	default ""
	help
	This parameter, and the following ones, are used to
	configure the timing parameters of a specific SFP
	transceiver. The transceiver name is autodected for each port
	in the White Rabbit Switch, and you need one configuration
	entry for each transceiver type that is installed in your
	device.
	vn (optional) - Vendor Name of an SFP
	pn - Part Number of an SFP
	vs (optional) - Vendor Serial (serial number) of an SFP
	tx - TX delay of an SFP
	rx - RX delay of an SFP
	wl_txrx - Tx wavelength separated by + with Rx wavelength of an SFP;
	for example wl_txrx=1490+1310
	To set a new SFP entry, increment the parameter 
	"Number of SFP entries in SFP configuration DB" in the upper menu.

config SFP12_PARAMS
	string "Parameters for SFP 12"
	depends on  N_SFP_ENTRIES=13 || N_SFP_ENTRIES=14 || N_SFP_ENTRIES=15 || N_SFP_ENTRIES=16 || N_SFP_ENTRIES=17 || N_SFP_ENTRIES=18
	default ""
	help
	This parameter, and the following ones, are used to
	configure the timing parameters of a specific SFP
	transceiver. The transceiver name is autodected for each port
	in the White Rabbit Switch, and you need one configuration
	entry for each transceiver type that is installed in your
	device.
	vn (optional) - Vendor Name of an SFP
	pn - Part Number of an SFP
	vs (optional) - Vendor Serial (serial number) of an SFP
	tx - TX delay of an SFP
	rx - RX delay of an SFP
	wl_txrx - Tx wavelength separated by + with Rx wavelength of an SFP;
	for example wl_txrx=1490+1310
	To set a new SFP entry, increment the parameter 
	"Number of SFP entries in SFP configuration DB" in the upper menu.

config SFP13_PARAMS
	string "Parameters for SFP 13"
	depends on  N_SFP_ENTRIES=14 || N_SFP_ENTRIES=15 || N_SFP_ENTRIES=16 || N_SFP_ENTRIES=17 || N_SFP_ENTRIES=18
	default ""
	help
	This parameter, and the following ones, are used to
	configure the timing parameters of a specific SFP
	transceiver. The transceiver name is autodected for each port
	in the White Rabbit Switch, and you need one configuration
	entry for each transceiver type that is installed in your
	device.
	vn (optional) - Vendor Name of an SFP
	pn - Part Number of an SFP
	vs (optional) - Vendor Serial (serial number) of an SFP
	tx - TX delay of an SFP
	rx - RX delay of an SFP
	wl_txrx - Tx wavelength separated by + with Rx wavelength of an SFP;
	for example wl_txrx=1490+1310
	To set a new SFP entry, increment the parameter 
	"Number of SFP entries in SFP configuration DB" in the upper menu.

config SFP14_PARAMS
	string "Parameters for SFP 14"
	depends on  N_SFP_ENTRIES=15 || N_SFP_ENTRIES=16 || N_SFP_ENTRIES=17 || N_SFP_ENTRIES=18
	default ""
	help
	This parameter, and the following ones, are used to
	configure the timing parameters of a specific SFP
	transceiver. The transceiver name is autodected for each port
	in the White Rabbit Switch, and you need one configuration
	entry for each transceiver type that is installed in your
	device.
	vn (optional) - Vendor Name of an SFP
	pn - Part Number of an SFP
	vs (optional) - Vendor Serial (serial number) of an SFP
	tx - TX delay of an SFP
	rx - RX delay of an SFP
	wl_txrx - Tx wavelength separated by + with Rx wavelength of an SFP;
	for example wl_txrx=1490+1310
	To set a new SFP entry, increment the parameter 
	"Number of SFP entries in SFP configuration DB" in the upper menu.

config SFP15_PARAMS
	string "Parameters for SFP 15"
	depends on  N_SFP_ENTRIES=16 || N_SFP_ENTRIES=17 || N_SFP_ENTRIES=18
	default ""
	help
	This parameter, and the following ones, are used to
	configure the timing parameters of a specific SFP
	transceiver. The transceiver name is autodected for each port
	in the White Rabbit Switch, and you need one configuration
	entry for each transceiver type that is installed in your
	device.
	vn (optional) - Vendor Name of an SFP
	pn - Part Number of an SFP
	vs (optional) - Vendor Serial (serial number) of an SFP
	tx - TX delay of an SFP
	rx - RX delay of an SFP
	wl_txrx - Tx wavelength separated by + with Rx wavelength of an SFP;
	for example wl_txrx=1490+1310
	To set a new SFP entry, increment the parameter 
	"Number of SFP entries in SFP configuration DB" in the upper menu.

config SFP16_PARAMS
	string "Parameters for SFP 16"
	depends on  N_SFP_ENTRIES=17 || N_SFP_ENTRIES=18
	default ""
	help
	This parameter, and the following ones, are used to
	configure the timing parameters of a specific SFP
	transceiver. The transceiver name is autodected for each port
	in the White Rabbit Switch, and you need one configuration
	entry for each transceiver type that is installed in your
	device.
	vn (optional) - Vendor Name of an SFP
	pn - Part Number of an SFP
	vs (optional) - Vendor Serial (serial number) of an SFP
	tx - TX delay of an SFP
	rx - RX delay of an SFP
	wl_txrx - Tx wavelength separated by + with Rx wavelength of an SFP;
	for example wl_txrx=1490+1310
	To set a new SFP entry, increment the parameter 
	"Number of SFP entries in SFP configuration DB" in the upper menu.

config SFP17_PARAMS
	string "Parameters for SFP 17"
	depends on  N_SFP_ENTRIES=18
	default ""
	help
	This parameter, and the following ones, are used to
	configure the timing parameters of a specific SFP
	transceiver. The transceiver name is autodected for each port
	in the White Rabbit Switch, and you need one configuration
	entry for each transceiver type that is installed in your
	device.
	vn (optional) - Vendor Name of an SFP
	pn - Part Number of an SFP
	vs (optional) - Vendor Serial (serial number) of an SFP
	tx - TX delay of an SFP
	rx - RX delay of an SFP
	wl_txrx - Tx wavelength separated by + with Rx wavelength of an SFP;
	for example wl_txrx=1490+1310
	To set a new SFP entry, increment the parameter 
	"Number of SFP entries in SFP configuration DB" in the upper menu.

endmenu

config N_FIBER_ENTRIES
	int "Number of fiber entries in fiber configuration DB"
	range 0  18
	default  4
	help
	This parameter defines the number of fiber entries
	that can be set in the configuration database
	Increase this number to add a new fiber entry.

menu "Fibers configuration DB"

config FIBER00_PARAMS
string "Parameters for fiber type 0"
	depends on  N_FIBER_ENTRIES=1 || N_FIBER_ENTRIES=2 || N_FIBER_ENTRIES=3 || N_FIBER_ENTRIES=4 || N_FIBER_ENTRIES=5 || N_FIBER_ENTRIES=6 || N_FIBER_ENTRIES=7 || N_FIBER_ENTRIES=8 || N_FIBER_ENTRIES=9 || N_FIBER_ENTRIES=10 || N_FIBER_ENTRIES=11 || N_FIBER_ENTRIES=12 || N_FIBER_ENTRIES=13 || N_FIBER_ENTRIES=14 || N_FIBER_ENTRIES=15 || N_FIBER_ENTRIES=16 || N_FIBER_ENTRIES=17 || N_FIBER_ENTRIES=18
	default "alpha_1310_1490=2.6787e-04"
	help
	This parameter specify the physical features of used fiber type.
	Specify the alpha value for each pair of used wavelengths.
	This parameter follows a format:
	alpha_XXXX_YYYY=1.23e-04,alpha_AAAA_BBBB=4.56e-04,...
	where XXX_YYYY and AAAA_BBBB are pairs of used wavelengths,
	1.23e-04, 4.56e-04 are alpha values to be used for particular
	wavelengths.
	To set a new fiber entry, increment the parameter 
	"Number of fiber entries in fiber configuration DB" in the upper menu.

config FIBER01_PARAMS
string "Parameters for fiber type 1"
	depends on  N_FIBER_ENTRIES=2 || N_FIBER_ENTRIES=3 || N_FIBER_ENTRIES=4 || N_FIBER_ENTRIES=5 || N_FIBER_ENTRIES=6 || N_FIBER_ENTRIES=7 || N_FIBER_ENTRIES=8 || N_FIBER_ENTRIES=9 || N_FIBER_ENTRIES=10 || N_FIBER_ENTRIES=11 || N_FIBER_ENTRIES=12 || N_FIBER_ENTRIES=13 || N_FIBER_ENTRIES=14 || N_FIBER_ENTRIES=15 || N_FIBER_ENTRIES=16 || N_FIBER_ENTRIES=17 || N_FIBER_ENTRIES=18
	default "alpha_1310_1490=2.6787e-04"
	help
	This parameter specify the physical features of used fiber type.
	Specify the alpha value for each pair of used wavelengths.
	This parameter follows a format:
	alpha_XXXX_YYYY=1.23e-04,alpha_AAAA_BBBB=4.56e-04,...
	where XXX_YYYY and AAAA_BBBB are pairs of used wavelengths,
	1.23e-04, 4.56e-04 are alpha values to be used for particular
	wavelengths.
	To set a new fiber entry, increment the parameter 
	"Number of fiber entries in fiber configuration DB" in the upper menu.

config FIBER02_PARAMS
string "Parameters for fiber type 2"
	depends on  N_FIBER_ENTRIES=3 || N_FIBER_ENTRIES=4 || N_FIBER_ENTRIES=5 || N_FIBER_ENTRIES=6 || N_FIBER_ENTRIES=7 || N_FIBER_ENTRIES=8 || N_FIBER_ENTRIES=9 || N_FIBER_ENTRIES=10 || N_FIBER_ENTRIES=11 || N_FIBER_ENTRIES=12 || N_FIBER_ENTRIES=13 || N_FIBER_ENTRIES=14 || N_FIBER_ENTRIES=15 || N_FIBER_ENTRIES=16 || N_FIBER_ENTRIES=17 || N_FIBER_ENTRIES=18
	default "alpha_1310_1490=2.6787e-04"
	help
	This parameter specify the physical features of used fiber type.
	Specify the alpha value for each pair of used wavelengths.
	This parameter follows a format:
	alpha_XXXX_YYYY=1.23e-04,alpha_AAAA_BBBB=4.56e-04,...
	where XXX_YYYY and AAAA_BBBB are pairs of used wavelengths,
	1.23e-04, 4.56e-04 are alpha values to be used for particular
	wavelengths.
	To set a new fiber entry, increment the parameter 
	"Number of fiber entries in fiber configuration DB" in the upper menu.

config FIBER03_PARAMS
string "Parameters for fiber type 3"
	depends on  N_FIBER_ENTRIES=4 || N_FIBER_ENTRIES=5 || N_FIBER_ENTRIES=6 || N_FIBER_ENTRIES=7 || N_FIBER_ENTRIES=8 || N_FIBER_ENTRIES=9 || N_FIBER_ENTRIES=10 || N_FIBER_ENTRIES=11 || N_FIBER_ENTRIES=12 || N_FIBER_ENTRIES=13 || N_FIBER_ENTRIES=14 || N_FIBER_ENTRIES=15 || N_FIBER_ENTRIES=16 || N_FIBER_ENTRIES=17 || N_FIBER_ENTRIES=18
	default "alpha_1310_1490=2.6787e-04"
	help
	This parameter specify the physical features of used fiber type.
	Specify the alpha value for each pair of used wavelengths.
	This parameter follows a format:
	alpha_XXXX_YYYY=1.23e-04,alpha_AAAA_BBBB=4.56e-04,...
	where XXX_YYYY and AAAA_BBBB are pairs of used wavelengths,
	1.23e-04, 4.56e-04 are alpha values to be used for particular
	wavelengths.
	To set a new fiber entry, increment the parameter 
	"Number of fiber entries in fiber configuration DB" in the upper menu.

config FIBER04_PARAMS
string "Parameters for fiber type 4"
	depends on  N_FIBER_ENTRIES=5 || N_FIBER_ENTRIES=6 || N_FIBER_ENTRIES=7 || N_FIBER_ENTRIES=8 || N_FIBER_ENTRIES=9 || N_FIBER_ENTRIES=10 || N_FIBER_ENTRIES=11 || N_FIBER_ENTRIES=12 || N_FIBER_ENTRIES=13 || N_FIBER_ENTRIES=14 || N_FIBER_ENTRIES=15 || N_FIBER_ENTRIES=16 || N_FIBER_ENTRIES=17 || N_FIBER_ENTRIES=18
	default ""
	help
	This parameter specify the physical features of used fiber type.
	Specify the alpha value for each pair of used wavelengths.
	This parameter follows a format:
	alpha_XXXX_YYYY=1.23e-04,alpha_AAAA_BBBB=4.56e-04,...
	where XXX_YYYY and AAAA_BBBB are pairs of used wavelengths,
	1.23e-04, 4.56e-04 are alpha values to be used for particular
	wavelengths.
	To set a new fiber entry, increment the parameter 
	"Number of fiber entries in fiber configuration DB" in the upper menu.

config FIBER05_PARAMS
string "Parameters for fiber type 5"
	depends on  N_FIBER_ENTRIES=6 || N_FIBER_ENTRIES=7 || N_FIBER_ENTRIES=8 || N_FIBER_ENTRIES=9 || N_FIBER_ENTRIES=10 || N_FIBER_ENTRIES=11 || N_FIBER_ENTRIES=12 || N_FIBER_ENTRIES=13 || N_FIBER_ENTRIES=14 || N_FIBER_ENTRIES=15 || N_FIBER_ENTRIES=16 || N_FIBER_ENTRIES=17 || N_FIBER_ENTRIES=18
	default ""
	help
	This parameter specify the physical features of used fiber type.
	Specify the alpha value for each pair of used wavelengths.
	This parameter follows a format:
	alpha_XXXX_YYYY=1.23e-04,alpha_AAAA_BBBB=4.56e-04,...
	where XXX_YYYY and AAAA_BBBB are pairs of used wavelengths,
	1.23e-04, 4.56e-04 are alpha values to be used for particular
	wavelengths.
	To set a new fiber entry, increment the parameter 
	"Number of fiber entries in fiber configuration DB" in the upper menu.

config FIBER06_PARAMS
string "Parameters for fiber type 6"
	depends on  N_FIBER_ENTRIES=7 || N_FIBER_ENTRIES=8 || N_FIBER_ENTRIES=9 || N_FIBER_ENTRIES=10 || N_FIBER_ENTRIES=11 || N_FIBER_ENTRIES=12 || N_FIBER_ENTRIES=13 || N_FIBER_ENTRIES=14 || N_FIBER_ENTRIES=15 || N_FIBER_ENTRIES=16 || N_FIBER_ENTRIES=17 || N_FIBER_ENTRIES=18
	default ""
	help
	This parameter specify the physical features of used fiber type.
	Specify the alpha value for each pair of used wavelengths.
	This parameter follows a format:
	alpha_XXXX_YYYY=1.23e-04,alpha_AAAA_BBBB=4.56e-04,...
	where XXX_YYYY and AAAA_BBBB are pairs of used wavelengths,
	1.23e-04, 4.56e-04 are alpha values to be used for particular
	wavelengths.
	To set a new fiber entry, increment the parameter 
	"Number of fiber entries in fiber configuration DB" in the upper menu.

config FIBER07_PARAMS
string "Parameters for fiber type 7"
	depends on  N_FIBER_ENTRIES=8 || N_FIBER_ENTRIES=9 || N_FIBER_ENTRIES=10 || N_FIBER_ENTRIES=11 || N_FIBER_ENTRIES=12 || N_FIBER_ENTRIES=13 || N_FIBER_ENTRIES=14 || N_FIBER_ENTRIES=15 || N_FIBER_ENTRIES=16 || N_FIBER_ENTRIES=17 || N_FIBER_ENTRIES=18
	default ""
	help
	This parameter specify the physical features of used fiber type.
	Specify the alpha value for each pair of used wavelengths.
	This parameter follows a format:
	alpha_XXXX_YYYY=1.23e-04,alpha_AAAA_BBBB=4.56e-04,...
	where XXX_YYYY and AAAA_BBBB are pairs of used wavelengths,
	1.23e-04, 4.56e-04 are alpha values to be used for particular
	wavelengths.
	To set a new fiber entry, increment the parameter 
	"Number of fiber entries in fiber configuration DB" in the upper menu.

config FIBER08_PARAMS
string "Parameters for fiber type 8"
	depends on  N_FIBER_ENTRIES=9 || N_FIBER_ENTRIES=10 || N_FIBER_ENTRIES=11 || N_FIBER_ENTRIES=12 || N_FIBER_ENTRIES=13 || N_FIBER_ENTRIES=14 || N_FIBER_ENTRIES=15 || N_FIBER_ENTRIES=16 || N_FIBER_ENTRIES=17 || N_FIBER_ENTRIES=18
	default ""
	help
	This parameter specify the physical features of used fiber type.
	Specify the alpha value for each pair of used wavelengths.
	This parameter follows a format:
	alpha_XXXX_YYYY=1.23e-04,alpha_AAAA_BBBB=4.56e-04,...
	where XXX_YYYY and AAAA_BBBB are pairs of used wavelengths,
	1.23e-04, 4.56e-04 are alpha values to be used for particular
	wavelengths.
	To set a new fiber entry, increment the parameter 
	"Number of fiber entries in fiber configuration DB" in the upper menu.

config FIBER09_PARAMS
string "Parameters for fiber type 9"
	depends on  N_FIBER_ENTRIES=10 || N_FIBER_ENTRIES=11 || N_FIBER_ENTRIES=12 || N_FIBER_ENTRIES=13 || N_FIBER_ENTRIES=14 || N_FIBER_ENTRIES=15 || N_FIBER_ENTRIES=16 || N_FIBER_ENTRIES=17 || N_FIBER_ENTRIES=18
	default ""
	help
	This parameter specify the physical features of used fiber type.
	Specify the alpha value for each pair of used wavelengths.
	This parameter follows a format:
	alpha_XXXX_YYYY=1.23e-04,alpha_AAAA_BBBB=4.56e-04,...
	where XXX_YYYY and AAAA_BBBB are pairs of used wavelengths,
	1.23e-04, 4.56e-04 are alpha values to be used for particular
	wavelengths.
	To set a new fiber entry, increment the parameter 
	"Number of fiber entries in fiber configuration DB" in the upper menu.

config FIBER10_PARAMS
string "Parameters for fiber type 10"
	depends on  N_FIBER_ENTRIES=11 || N_FIBER_ENTRIES=12 || N_FIBER_ENTRIES=13 || N_FIBER_ENTRIES=14 || N_FIBER_ENTRIES=15 || N_FIBER_ENTRIES=16 || N_FIBER_ENTRIES=17 || N_FIBER_ENTRIES=18
	default ""
	help
	This parameter specify the physical features of used fiber type.
	Specify the alpha value for each pair of used wavelengths.
	This parameter follows a format:
	alpha_XXXX_YYYY=1.23e-04,alpha_AAAA_BBBB=4.56e-04,...
	where XXX_YYYY and AAAA_BBBB are pairs of used wavelengths,
	1.23e-04, 4.56e-04 are alpha values to be used for particular
	wavelengths.
	To set a new fiber entry, increment the parameter 
	"Number of fiber entries in fiber configuration DB" in the upper menu.

config FIBER11_PARAMS
string "Parameters for fiber type 11"
	depends on  N_FIBER_ENTRIES=12 || N_FIBER_ENTRIES=13 || N_FIBER_ENTRIES=14 || N_FIBER_ENTRIES=15 || N_FIBER_ENTRIES=16 || N_FIBER_ENTRIES=17 || N_FIBER_ENTRIES=18
	default ""
	help
	This parameter specify the physical features of used fiber type.
	Specify the alpha value for each pair of used wavelengths.
	This parameter follows a format:
	alpha_XXXX_YYYY=1.23e-04,alpha_AAAA_BBBB=4.56e-04,...
	where XXX_YYYY and AAAA_BBBB are pairs of used wavelengths,
	1.23e-04, 4.56e-04 are alpha values to be used for particular
	wavelengths.
	To set a new fiber entry, increment the parameter 
	"Number of fiber entries in fiber configuration DB" in the upper menu.

config FIBER12_PARAMS
string "Parameters for fiber type 12"
	depends on  N_FIBER_ENTRIES=13 || N_FIBER_ENTRIES=14 || N_FIBER_ENTRIES=15 || N_FIBER_ENTRIES=16 || N_FIBER_ENTRIES=17 || N_FIBER_ENTRIES=18
	default ""
	help
	This parameter specify the physical features of used fiber type.
	Specify the alpha value for each pair of used wavelengths.
	This parameter follows a format:
	alpha_XXXX_YYYY=1.23e-04,alpha_AAAA_BBBB=4.56e-04,...
	where XXX_YYYY and AAAA_BBBB are pairs of used wavelengths,
	1.23e-04, 4.56e-04 are alpha values to be used for particular
	wavelengths.
	To set a new fiber entry, increment the parameter 
	"Number of fiber entries in fiber configuration DB" in the upper menu.

config FIBER13_PARAMS
string "Parameters for fiber type 13"
	depends on  N_FIBER_ENTRIES=14 || N_FIBER_ENTRIES=15 || N_FIBER_ENTRIES=16 || N_FIBER_ENTRIES=17 || N_FIBER_ENTRIES=18
	default ""
	help
	This parameter specify the physical features of used fiber type.
	Specify the alpha value for each pair of used wavelengths.
	This parameter follows a format:
	alpha_XXXX_YYYY=1.23e-04,alpha_AAAA_BBBB=4.56e-04,...
	where XXX_YYYY and AAAA_BBBB are pairs of used wavelengths,
	1.23e-04, 4.56e-04 are alpha values to be used for particular
	wavelengths.
	To set a new fiber entry, increment the parameter 
	"Number of fiber entries in fiber configuration DB" in the upper menu.

config FIBER14_PARAMS
string "Parameters for fiber type 14"
	depends on  N_FIBER_ENTRIES=15 || N_FIBER_ENTRIES=16 || N_FIBER_ENTRIES=17 || N_FIBER_ENTRIES=18
	default ""
	help
	This parameter specify the physical features of used fiber type.
	Specify the alpha value for each pair of used wavelengths.
	This parameter follows a format:
	alpha_XXXX_YYYY=1.23e-04,alpha_AAAA_BBBB=4.56e-04,...
	where XXX_YYYY and AAAA_BBBB are pairs of used wavelengths,
	1.23e-04, 4.56e-04 are alpha values to be used for particular
	wavelengths.
	To set a new fiber entry, increment the parameter 
	"Number of fiber entries in fiber configuration DB" in the upper menu.

config FIBER15_PARAMS
string "Parameters for fiber type 15"
	depends on  N_FIBER_ENTRIES=16 || N_FIBER_ENTRIES=17 || N_FIBER_ENTRIES=18
	default ""
	help
	This parameter specify the physical features of used fiber type.
	Specify the alpha value for each pair of used wavelengths.
	This parameter follows a format:
	alpha_XXXX_YYYY=1.23e-04,alpha_AAAA_BBBB=4.56e-04,...
	where XXX_YYYY and AAAA_BBBB are pairs of used wavelengths,
	1.23e-04, 4.56e-04 are alpha values to be used for particular
	wavelengths.
	To set a new fiber entry, increment the parameter 
	"Number of fiber entries in fiber configuration DB" in the upper menu.

config FIBER16_PARAMS
string "Parameters for fiber type 16"
	depends on  N_FIBER_ENTRIES=17 || N_FIBER_ENTRIES=18
	default ""
	help
	This parameter specify the physical features of used fiber type.
	Specify the alpha value for each pair of used wavelengths.
	This parameter follows a format:
	alpha_XXXX_YYYY=1.23e-04,alpha_AAAA_BBBB=4.56e-04,...
	where XXX_YYYY and AAAA_BBBB are pairs of used wavelengths,
	1.23e-04, 4.56e-04 are alpha values to be used for particular
	wavelengths.
	To set a new fiber entry, increment the parameter 
	"Number of fiber entries in fiber configuration DB" in the upper menu.

config FIBER17_PARAMS
string "Parameters for fiber type 17"
	depends on  N_FIBER_ENTRIES=18
	default ""
	help
	This parameter specify the physical features of used fiber type.
	Specify the alpha value for each pair of used wavelengths.
	This parameter follows a format:
	alpha_XXXX_YYYY=1.23e-04,alpha_AAAA_BBBB=4.56e-04,...
	where XXX_YYYY and AAAA_BBBB are pairs of used wavelengths,
	1.23e-04, 4.56e-04 are alpha values to be used for particular
	wavelengths.
	To set a new fiber entry, increment the parameter 
	"Number of fiber entries in fiber configuration DB" in the upper menu.

endmenu

endmenu