-
Jean-Claude BAU authored
KConfig has been improved adding new extra constraints when the timing mode is changed. It has an impact on port configuration (externalPortConfiguration & default bmc mode) and also on the overwritten clock class.
dfd464d3
Kconfig_port_timing.in 267.23 KiB
menu "Port Timing Configuration"
config PTP_OPT_EXT_PORT_CONFIG_ENABLED
bool "externalPortConfigurationEnabled"
depends on TIME_BC
default false
help
This option is used by the high accuracy profile to force the port state.
When set, BMCA is disabled.
For more details please refer to the IEEE 1588-20019 (clause 17.6.2)
config PTP_SLAVE_ONLY
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED="n"
bool "slaveOnly"
default n
help
A slaveOnly Ordinary Clock utilizes the slaveOnly state machine
which does not enable transition to MASTER state.
For more details please refer to the IEEE 1588-20019 (clause 9.2.2.1)
menu "PORT 1"
config PORT01_IFACE
string "Network interface"
default "wri1"
help
Used to set the physical port interface name: "wri[1-18]"
config PORT01_FIBER
int "Fiber type"
default 0
help
Used to set the type of fiber (number referring to the corresponding
FIBERXX_PARAMS)
config PORT01_CONSTANT_ASYMMETRY
int "asymmetryCorrectionPortDS.constantAsymmetry"
default 0
help
Used to set the constant delay asymmetry.
choice
prompt "Number of port instances"
default PORT01_INSTANCE_COUNT_1
config PORT01_INSTANCE_COUNT_0
bool "0"
config PORT01_INSTANCE_COUNT_1
bool "1"
config PORT01_INSTANCE_COUNT_2
bool "2"
endchoice
menu "Instance 1"
depends on PORT01_INSTANCE_COUNT_1 || PORT01_INSTANCE_COUNT_2
choice
prompt "Network protocol"
default PORT01_INST01_PROTOCOL_RAW
config PORT01_INST01_PROTOCOL_RAW
bool "IEEE 802.3"
config PORT01_INST01_PROTOCOL_UDP_IPV4
bool "UDP/Ipv4"
endchoice
choice
prompt "Delay mechanism"
default PORT01_INST01_MECHANISM_E2E
config PORT01_INST01_MECHANISM_E2E
bool "End-to-end"
config PORT01_INST01_MECHANISM_P2P
bool "Peer-to-peer"endchoice
config PORT01_INST01_MONITOR
bool "SNMP monitoring"
default y
help
Option to disable or enable triggering errors in SNMP on a port
choice
prompt "Profile"
default PORT01_INST01_PROFILE_WR
config PORT01_INST01_PROFILE_PTP
bool "PTP"
config PORT01_INST01_PROFILE_WR
bool "White Rabbit"
config PORT01_INST01_PROFILE_CUSTOM
bool "Custom"
endchoice
choice
prompt "Desired state"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
default PORT01_INST01_DESIRADE_STATE_SLAVE if TIME_BC
default PORT01_INST01_DESIRADE_STATE_MASTER
config PORT01_INST01_DESIRADE_STATE_MASTER
bool "Master"
config PORT01_INST01_DESIRADE_STATE_SLAVE
bool "Slave"
config PORT01_INST01_DESIRADE_STATE_PASSIVE
bool "Passive"
endchoice
config PORT01_INST01_ASYMMETRY_CORRECTION_ENABLE
depends on !PORT01_INST01_PROFILE_HA && !PORT01_INST01_PROFILE_WR
bool "asymmetryCorrectionPortDS.enable"
default y
help
When supported, the value TRUE shall indicate that the mechanism of for the calculation
of the <delayAsymmetry> for certain media is enabled on the PTP port.
choice
prompt "BMCA mode"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
default PORT01_INST01_BMODE_MASTER_ONLY if TIME_GM || TIME_FM
default PORT01_INST01_BMODE_AUTO if TIME_BC
config PORT01_INST01_BMODE_MASTER_ONLY
bool "MasterOnly"
config PORT01_INST01_BMODE_AUTO
bool "Auto"
endchoice
config PORT01_INST01_EGRESS_LATENCY
int "timestampCorrectionPortDS.egressLatency (ps)"
default 223897
help
Defines the transmission constant delay (ps)
config PORT01_INST01_INGRESS_LATENCY
int "timestampCorrectionPortDS.ingressLatency (ps)"
default 226273
help
Defines the reception constant delay (ps)
config PORT01_INST01_ANNOUNCE_INTERVAL
int "logAnnounceInterval"
default 1
range 0 4
help
The mean time interval between transmissions of successive
Announce messages. The value is the logarithm to the base 2. The configurable range shall be 0 to 4.
config PORT01_INST01_ANNOUNCE_RECEIPT_TIMEOUT
int "announceReceiptTimeout"
default 3
range 2 255
help
The announceReceiptTimeout specifies the number of announceIntervals
that must pass without receipt of an Announce message before the
occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 255
config PORT01_INST01_SYNC_INTERVAL
int "logSyncInterval"
default 0
range -1 1
help
The mean time interval between transmission of successive
Sync messages, i.e., the sync-interval, when transmitted
as multicast messages. The value is the logarithm to the base 2.
The configurable range shall be -1 to +1
config PORT01_INST01_MIN_DELAY_REQ_INTERVAL
depends on PORT01_INST01_MECHANISM_E2E
int "minDelayRequestInterval"
default 0
range 0 5
help
The minDelayRequestInterval specifies the minimum permitted
mean time interval between successive Delay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT01_INST01_MIN_PDELAY_REQ_INTERVAL
depends on PORT01_INST01_MECHANISM_P2P
int "minPDelayRequestInterval"
default 0
range 0 5
help
The minPDelayRequestInterval specifies the minimum permitted
mean time interval between successive Pdelay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT01_INST01_L1SYNC_ENABLED
depends on PORT01_INST01_PROFILE_CUSTOM
bool "L1SyncBasicPortDS.L1SyncEnabled"
default y
help
This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled
config PORT01_INST01_L1SYNC_INTERVAL
depends on PORT01_INST01_PROFILE_HA || (PORT01_INST01_PROFILE_CUSTOM && PORT01_INST01_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.logL1SyncInterval"
default 0
range -4 4
help
The L1Sync interval specifies the time interval
between successive periodic L1_SYNC TLV.
The value is the logarithm to the base 2.
The configurable range shall be -4 to 4
config PORT01_INST01_L1SYNC_RECEIPT_TIMEOUT
depends on PORT01_INST01_PROFILE_HA || (PORT01_INST01_PROFILE_CUSTOM && PORT01_INST01_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
default 3
range 2 10
help The value of L1SyncReceiptTimeout specifies the number of elapsed
L1SyncIntervals that must pass without reception of the L1_SYNC TLV
before the L1_SYNC TLV reception timeout occurs.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 10
config PORT01_INST01_L1SYNC_TX_COHERENCY_IS_REQUIRED
depends on PORT01_INST01_PROFILE_CUSTOM && PORT01_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.txCoherencyIsRequired"
default y
help
The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a transmit coherent port.
config PORT01_INST01_L1SYNC_RX_COHERENCY_IS_REQUIRED
depends on PORT01_INST01_PROFILE_CUSTOM && PORT01_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
default y
help
The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a receive coherent port.
config PORT01_INST01_L1SYNC_CONGRUENCY_IS_REQUIRED
depends on PORT01_INST01_PROFILE_CUSTOM && PORT01_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.congruencyIsRequired"
default y
help
The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
be a congruent port
config PORT01_INST01_L1SYNC_OPT_PARAMS_ENABLED
depends on PORT01_INST01_PROFILE_CUSTOM && PORT01_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.optParamsEnabled"
default n
help
The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
TLV extends this TLV with the information about the optional parameters.
config PORT01_INST01_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
depends on PORT01_INST01_L1SYNC_OPT_PARAMS_ENABLED="y"
bool "L1SyncBasicPortDS.timestampsCorrectedTx"
default n
help
When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE,
the L1Sync port shall correct the transmitted egress timestamps with
the known value of the phase offset.
endmenu
menu "Instance 2"
depends on PORT01_INSTANCE_COUNT_2
choice
prompt "Network protocol"
default PORT01_INST02_PROTOCOL_RAW
config PORT01_INST02_PROTOCOL_RAW
bool "IEEE 802.3"
config PORT01_INST02_PROTOCOL_UDP_IPV4
bool "UDP/Ipv4"
endchoice
choice
prompt "Delay mechanism"
default PORT01_INST02_MECHANISM_E2E
config PORT01_INST02_MECHANISM_E2E
bool "End-to-end"
config PORT01_INST02_MECHANISM_P2P bool "Peer-to-peer"
endchoice
config PORT01_INST02_MONITOR
bool "SNMP monitoring"
default y
help
Option to disable or enable triggering errors in SNMP on a port
choice
prompt "Profile"
default PORT01_INST02_PROFILE_WR
config PORT01_INST02_PROFILE_PTP
bool "PTP"
config PORT01_INST02_PROFILE_WR
bool "White Rabbit"
config PORT01_INST02_PROFILE_CUSTOM
bool "Custom"
endchoice
choice
prompt "Desired state"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
default PORT01_INST02_DESIRADE_STATE_SLAVE if TIME_BC
default PORT01_INST02_DESIRADE_STATE_MASTER
config PORT01_INST02_DESIRADE_STATE_MASTER
bool "Master"
config PORT01_INST02_DESIRADE_STATE_SLAVE
bool "Slave"
config PORT01_INST02_DESIRADE_STATE_PASSIVE
bool "Passive"
endchoice
config PORT01_INST02_ASYMMETRY_CORRECTION_ENABLE
depends on !PORT01_INST02_PROFILE_HA && !PORT01_INST02_PROFILE_WR
bool "asymmetryCorrectionPortDS.enable"
default y
help
When supported, the value TRUE shall indicate that the mechanism of for the calculation
of the <delayAsymmetry> for certain media is enabled on the PTP port.
choice
prompt "BMCA mode"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
default PORT01_INST02_BMODE_MASTER_ONLY if TIME_GM || TIME_FM
default PORT01_INST02_BMODE_AUTO if TIME_BC
config PORT01_INST02_BMODE_MASTER_ONLY
bool "MasterOnly"
config PORT01_INST02_BMODE_AUTO
bool "Auto"
endchoice
config PORT01_INST02_EGRESS_LATENCY
int "timestampCorrectionPortDS.egressLatency (ps)"
default 223897
help
Defines the transmission constant delay (ps)
config PORT01_INST02_INGRESS_LATENCY
int "timestampCorrectionPortDS.ingressLatency (ps)"
default 226273
help
Defines the reception constant delay (ps)
config PORT01_INST02_ANNOUNCE_INTERVAL
int "logAnnounceInterval"
default 1
range 0 4
help
The mean time interval between transmissions of successive Announce messages. The value is the logarithm to the base 2.
The configurable range shall be 0 to 4.
config PORT01_INST02_ANNOUNCE_RECEIPT_TIMEOUT
int "announceReceiptTimeout"
default 3
range 2 255
help
The announceReceiptTimeout specifies the number of announceIntervals
that must pass without receipt of an Announce message before the
occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 255
config PORT01_INST02_SYNC_INTERVAL
int "logSyncInterval"
default 0
range -1 1
help
The mean time interval between transmission of successive
Sync messages, i.e., the sync-interval, when transmitted
as multicast messages. The value is the logarithm to the base 2.
The configurable range shall be -1 to +1
config PORT01_INST02_MIN_DELAY_REQ_INTERVAL
depends on PORT01_INST02_MECHANISM_E2E
int "minDelayRequestInterval"
default 0
range 0 5
help
The minDelayRequestInterval specifies the minimum permitted
mean time interval between successive Delay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT01_INST02_MIN_PDELAY_REQ_INTERVAL
depends on PORT01_INST02_MECHANISM_P2P
int "minPDelayRequestInterval"
default 0
range 0 5
help
The minPDelayRequestInterval specifies the minimum permitted
mean time interval between successive Pdelay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT01_INST02_L1SYNC_ENABLED
depends on PORT01_INST02_PROFILE_CUSTOM
bool "L1SyncBasicPortDS.L1SyncEnabled"
default y
help
This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled
config PORT01_INST02_L1SYNC_INTERVAL
depends on PORT01_INST02_PROFILE_HA || (PORT01_INST02_PROFILE_CUSTOM && PORT01_INST02_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.logL1SyncInterval"
default 0
range -4 4
help
The L1Sync interval specifies the time interval
between successive periodic L1_SYNC TLV.
The value is the logarithm to the base 2.
The configurable range shall be -4 to 4
config PORT01_INST02_L1SYNC_RECEIPT_TIMEOUT
depends on PORT01_INST02_PROFILE_HA || (PORT01_INST02_PROFILE_CUSTOM && PORT01_INST02_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
default 3
range 2 10 help
The value of L1SyncReceiptTimeout specifies the number of elapsed
L1SyncIntervals that must pass without reception of the L1_SYNC TLV
before the L1_SYNC TLV reception timeout occurs.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 10
config PORT01_INST02_L1SYNC_TX_COHERENCY_IS_REQUIRED
depends on PORT01_INST02_PROFILE_CUSTOM && PORT01_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.txCoherencyIsRequired"
default y
help
The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a transmit coherent port.
config PORT01_INST02_L1SYNC_RX_COHERENCY_IS_REQUIRED
depends on PORT01_INST02_PROFILE_CUSTOM && PORT01_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
default y
help
The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a receive coherent port.
config PORT01_INST02_L1SYNC_CONGRUENCY_IS_REQUIRED
depends on PORT01_INST02_PROFILE_CUSTOM && PORT01_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.congruencyIsRequired"
default y
help
The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
be a congruent port
config PORT01_INST02_L1SYNC_OPT_PARAMS_ENABLED
depends on PORT01_INST02_PROFILE_CUSTOM && PORT01_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.optParamsEnabled"
default n
help
The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
TLV extends this TLV with the information about the optional parameters.
config PORT01_INST02_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
depends on PORT01_INST02_L1SYNC_OPT_PARAMS_ENABLED="y"
bool "L1SyncBasicPortDS.timestampsCorrectedTx"
default n
help
When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE,
the L1Sync port shall correct the transmitted egress timestamps with
the known value of the phase offset.
endmenu
endmenu
menu "PORT 2"
config PORT02_IFACE
string "Network interface"
default "wri2"
help
Used to set the physical port interface name: "wri[1-18]"
config PORT02_FIBER
int "Fiber type"
default 0
help
Used to set the type of fiber (number referring to the corresponding
FIBERXX_PARAMS)
config PORT02_CONSTANT_ASYMMETRY
int "asymmetryCorrectionPortDS.constantAsymmetry"
default 0
help
Used to set the constant delay asymmetry.
choice
prompt "Number of port instances"
default PORT02_INSTANCE_COUNT_1
config PORT02_INSTANCE_COUNT_0
bool "0"
config PORT02_INSTANCE_COUNT_1
bool "1"
config PORT02_INSTANCE_COUNT_2
bool "2"
endchoice
menu "Instance 1"
depends on PORT02_INSTANCE_COUNT_1 || PORT02_INSTANCE_COUNT_2
choice
prompt "Network protocol"
default PORT02_INST01_PROTOCOL_RAW
config PORT02_INST01_PROTOCOL_RAW
bool "IEEE 802.3"
config PORT02_INST01_PROTOCOL_UDP_IPV4
bool "UDP/Ipv4"
endchoice
choice
prompt "Delay mechanism"
default PORT02_INST01_MECHANISM_E2E
config PORT02_INST01_MECHANISM_E2E
bool "End-to-end"
config PORT02_INST01_MECHANISM_P2P
bool "Peer-to-peer"
endchoice
config PORT02_INST01_MONITOR
bool "SNMP monitoring"
default y
help
Option to disable or enable triggering errors in SNMP on a port
choice
prompt "Profile"
default PORT02_INST01_PROFILE_WR
config PORT02_INST01_PROFILE_PTP
bool "PTP"
config PORT02_INST01_PROFILE_WR
bool "White Rabbit"
config PORT02_INST01_PROFILE_CUSTOM
bool "Custom"
endchoice
choice
prompt "Desired state"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
default PORT02_INST01_DESIRADE_STATE_MASTER
config PORT02_INST01_DESIRADE_STATE_MASTER
bool "Master"
config PORT02_INST01_DESIRADE_STATE_SLAVE
bool "Slave"
config PORT02_INST01_DESIRADE_STATE_PASSIVE
bool "Passive"
endchoice
config PORT02_INST01_ASYMMETRY_CORRECTION_ENABLE
depends on !PORT02_INST01_PROFILE_HA && !PORT02_INST01_PROFILE_WR
bool "asymmetryCorrectionPortDS.enable" default y
help
When supported, the value TRUE shall indicate that the mechanism of for the calculation
of the <delayAsymmetry> for certain media is enabled on the PTP port.
choice
prompt "BMCA mode"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
default PORT02_INST01_BMODE_MASTER_ONLY if TIME_GM || TIME_FM
default PORT02_INST01_BMODE_AUTO if TIME_BC
config PORT02_INST01_BMODE_MASTER_ONLY
bool "MasterOnly"
config PORT02_INST01_BMODE_AUTO
bool "Auto"
endchoice
config PORT02_INST01_EGRESS_LATENCY
int "timestampCorrectionPortDS.egressLatency (ps)"
default 224037
help
Defines the transmission constant delay (ps)
config PORT02_INST01_INGRESS_LATENCY
int "timestampCorrectionPortDS.ingressLatency (ps)"
default 226377
help
Defines the reception constant delay (ps)
config PORT02_INST01_ANNOUNCE_INTERVAL
int "logAnnounceInterval"
default 1
range 0 4
help
The mean time interval between transmissions of successive
Announce messages. The value is the logarithm to the base 2.
The configurable range shall be 0 to 4.
config PORT02_INST01_ANNOUNCE_RECEIPT_TIMEOUT
int "announceReceiptTimeout"
default 3
range 2 255
help
The announceReceiptTimeout specifies the number of announceIntervals
that must pass without receipt of an Announce message before the
occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 255
config PORT02_INST01_SYNC_INTERVAL
int "logSyncInterval"
default 0
range -1 1
help
The mean time interval between transmission of successive
Sync messages, i.e., the sync-interval, when transmitted
as multicast messages. The value is the logarithm to the base 2.
The configurable range shall be -1 to +1
config PORT02_INST01_MIN_DELAY_REQ_INTERVAL
depends on PORT02_INST01_MECHANISM_E2E
int "minDelayRequestInterval"
default 0
range 0 5
help
The minDelayRequestInterval specifies the minimum permitted
mean time interval between successive Delay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT02_INST01_MIN_PDELAY_REQ_INTERVAL depends on PORT02_INST01_MECHANISM_P2P
int "minPDelayRequestInterval"
default 0
range 0 5
help
The minPDelayRequestInterval specifies the minimum permitted
mean time interval between successive Pdelay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT02_INST01_L1SYNC_ENABLED
depends on PORT02_INST01_PROFILE_CUSTOM
bool "L1SyncBasicPortDS.L1SyncEnabled"
default y
help
This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled
config PORT02_INST01_L1SYNC_INTERVAL
depends on PORT02_INST01_PROFILE_HA || (PORT02_INST01_PROFILE_CUSTOM && PORT02_INST01_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.logL1SyncInterval"
default 0
range -4 4
help
The L1Sync interval specifies the time interval
between successive periodic L1_SYNC TLV.
The value is the logarithm to the base 2.
The configurable range shall be -4 to 4
config PORT02_INST01_L1SYNC_RECEIPT_TIMEOUT
depends on PORT02_INST01_PROFILE_HA || (PORT02_INST01_PROFILE_CUSTOM && PORT02_INST01_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
default 3
range 2 10
help
The value of L1SyncReceiptTimeout specifies the number of elapsed
L1SyncIntervals that must pass without reception of the L1_SYNC TLV
before the L1_SYNC TLV reception timeout occurs.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 10
config PORT02_INST01_L1SYNC_TX_COHERENCY_IS_REQUIRED
depends on PORT02_INST01_PROFILE_CUSTOM && PORT02_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.txCoherencyIsRequired"
default y
help
The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a transmit coherent port.
config PORT02_INST01_L1SYNC_RX_COHERENCY_IS_REQUIRED
depends on PORT02_INST01_PROFILE_CUSTOM && PORT02_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
default y
help
The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a receive coherent port.
config PORT02_INST01_L1SYNC_CONGRUENCY_IS_REQUIRED
depends on PORT02_INST01_PROFILE_CUSTOM && PORT02_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.congruencyIsRequired"
default y
help
The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
be a congruent port
config PORT02_INST01_L1SYNC_OPT_PARAMS_ENABLED
depends on PORT02_INST01_PROFILE_CUSTOM && PORT02_INST01_L1SYNC_ENABLED="y" bool "L1SyncBasicPortDS.optParamsEnabled"
default n
help
The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
TLV extends this TLV with the information about the optional parameters.
config PORT02_INST01_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
depends on PORT02_INST01_L1SYNC_OPT_PARAMS_ENABLED="y"
bool "L1SyncBasicPortDS.timestampsCorrectedTx"
default n
help
When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE,
the L1Sync port shall correct the transmitted egress timestamps with
the known value of the phase offset.
endmenu
menu "Instance 2"
depends on PORT02_INSTANCE_COUNT_2
choice
prompt "Network protocol"
default PORT02_INST02_PROTOCOL_RAW
config PORT02_INST02_PROTOCOL_RAW
bool "IEEE 802.3"
config PORT02_INST02_PROTOCOL_UDP_IPV4
bool "UDP/Ipv4"
endchoice
choice
prompt "Delay mechanism"
default PORT02_INST02_MECHANISM_E2E
config PORT02_INST02_MECHANISM_E2E
bool "End-to-end"
config PORT02_INST02_MECHANISM_P2P
bool "Peer-to-peer"
endchoice
config PORT02_INST02_MONITOR
bool "SNMP monitoring"
default y
help
Option to disable or enable triggering errors in SNMP on a port
choice
prompt "Profile"
default PORT02_INST02_PROFILE_WR
config PORT02_INST02_PROFILE_PTP
bool "PTP"
config PORT02_INST02_PROFILE_WR
bool "White Rabbit"
config PORT02_INST02_PROFILE_CUSTOM
bool "Custom"
endchoice
choice
prompt "Desired state"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
default PORT02_INST02_DESIRADE_STATE_MASTER
config PORT02_INST02_DESIRADE_STATE_MASTER
bool "Master"
config PORT02_INST02_DESIRADE_STATE_SLAVE
bool "Slave"
config PORT02_INST02_DESIRADE_STATE_PASSIVE
bool "Passive"
endchoice
config PORT02_INST02_ASYMMETRY_CORRECTION_ENABLE
depends on !PORT02_INST02_PROFILE_HA && !PORT02_INST02_PROFILE_WR
bool "asymmetryCorrectionPortDS.enable" default y
help
When supported, the value TRUE shall indicate that the mechanism of for the calculation
of the <delayAsymmetry> for certain media is enabled on the PTP port.
choice
prompt "BMCA mode"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
default PORT02_INST02_BMODE_MASTER_ONLY if TIME_GM || TIME_FM
default PORT02_INST02_BMODE_AUTO if TIME_BC
config PORT02_INST02_BMODE_MASTER_ONLY
bool "MasterOnly"
config PORT02_INST02_BMODE_AUTO
bool "Auto"
endchoice
config PORT02_INST02_EGRESS_LATENCY
int "timestampCorrectionPortDS.egressLatency (ps)"
default 224037
help
Defines the transmission constant delay (ps)
config PORT02_INST02_INGRESS_LATENCY
int "timestampCorrectionPortDS.ingressLatency (ps)"
default 226377
help
Defines the reception constant delay (ps)
config PORT02_INST02_ANNOUNCE_INTERVAL
int "logAnnounceInterval"
default 1
range 0 4
help
The mean time interval between transmissions of successive
Announce messages. The value is the logarithm to the base 2.
The configurable range shall be 0 to 4.
config PORT02_INST02_ANNOUNCE_RECEIPT_TIMEOUT
int "announceReceiptTimeout"
default 3
range 2 255
help
The announceReceiptTimeout specifies the number of announceIntervals
that must pass without receipt of an Announce message before the
occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 255
config PORT02_INST02_SYNC_INTERVAL
int "logSyncInterval"
default 0
range -1 1
help
The mean time interval between transmission of successive
Sync messages, i.e., the sync-interval, when transmitted
as multicast messages. The value is the logarithm to the base 2.
The configurable range shall be -1 to +1
config PORT02_INST02_MIN_DELAY_REQ_INTERVAL
depends on PORT02_INST02_MECHANISM_E2E
int "minDelayRequestInterval"
default 0
range 0 5
help
The minDelayRequestInterval specifies the minimum permitted
mean time interval between successive Delay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT02_INST02_MIN_PDELAY_REQ_INTERVAL depends on PORT02_INST02_MECHANISM_P2P
int "minPDelayRequestInterval"
default 0
range 0 5
help
The minPDelayRequestInterval specifies the minimum permitted
mean time interval between successive Pdelay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT02_INST02_L1SYNC_ENABLED
depends on PORT02_INST02_PROFILE_CUSTOM
bool "L1SyncBasicPortDS.L1SyncEnabled"
default y
help
This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled
config PORT02_INST02_L1SYNC_INTERVAL
depends on PORT02_INST02_PROFILE_HA || (PORT02_INST02_PROFILE_CUSTOM && PORT02_INST02_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.logL1SyncInterval"
default 0
range -4 4
help
The L1Sync interval specifies the time interval
between successive periodic L1_SYNC TLV.
The value is the logarithm to the base 2.
The configurable range shall be -4 to 4
config PORT02_INST02_L1SYNC_RECEIPT_TIMEOUT
depends on PORT02_INST02_PROFILE_HA || (PORT02_INST02_PROFILE_CUSTOM && PORT02_INST02_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
default 3
range 2 10
help
The value of L1SyncReceiptTimeout specifies the number of elapsed
L1SyncIntervals that must pass without reception of the L1_SYNC TLV
before the L1_SYNC TLV reception timeout occurs.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 10
config PORT02_INST02_L1SYNC_TX_COHERENCY_IS_REQUIRED
depends on PORT02_INST02_PROFILE_CUSTOM && PORT02_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.txCoherencyIsRequired"
default y
help
The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a transmit coherent port.
config PORT02_INST02_L1SYNC_RX_COHERENCY_IS_REQUIRED
depends on PORT02_INST02_PROFILE_CUSTOM && PORT02_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
default y
help
The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a receive coherent port.
config PORT02_INST02_L1SYNC_CONGRUENCY_IS_REQUIRED
depends on PORT02_INST02_PROFILE_CUSTOM && PORT02_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.congruencyIsRequired"
default y
help
The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
be a congruent port
config PORT02_INST02_L1SYNC_OPT_PARAMS_ENABLED
depends on PORT02_INST02_PROFILE_CUSTOM && PORT02_INST02_L1SYNC_ENABLED="y" bool "L1SyncBasicPortDS.optParamsEnabled"
default n
help
The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
TLV extends this TLV with the information about the optional parameters.
config PORT02_INST02_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
depends on PORT02_INST02_L1SYNC_OPT_PARAMS_ENABLED="y"
bool "L1SyncBasicPortDS.timestampsCorrectedTx"
default n
help
When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE,
the L1Sync port shall correct the transmitted egress timestamps with
the known value of the phase offset.
endmenu
endmenu
menu "PORT 3"
config PORT03_IFACE
string "Network interface"
default "wri3"
help
Used to set the physical port interface name: "wri[1-18]"
config PORT03_FIBER
int "Fiber type"
default 0
help
Used to set the type of fiber (number referring to the corresponding
FIBERXX_PARAMS)
config PORT03_CONSTANT_ASYMMETRY
int "asymmetryCorrectionPortDS.constantAsymmetry"
default 0
help
Used to set the constant delay asymmetry.
choice
prompt "Number of port instances"
default PORT03_INSTANCE_COUNT_1
config PORT03_INSTANCE_COUNT_0
bool "0"
config PORT03_INSTANCE_COUNT_1
bool "1"
config PORT03_INSTANCE_COUNT_2
bool "2"
endchoice
menu "Instance 1"
depends on PORT03_INSTANCE_COUNT_1 || PORT03_INSTANCE_COUNT_2
choice
prompt "Network protocol"
default PORT03_INST01_PROTOCOL_RAW
config PORT03_INST01_PROTOCOL_RAW
bool "IEEE 802.3"
config PORT03_INST01_PROTOCOL_UDP_IPV4
bool "UDP/Ipv4"
endchoice
choice
prompt "Delay mechanism"
default PORT03_INST01_MECHANISM_E2E
config PORT03_INST01_MECHANISM_E2E
bool "End-to-end"
config PORT03_INST01_MECHANISM_P2P
bool "Peer-to-peer"endchoice
config PORT03_INST01_MONITOR
bool "SNMP monitoring"
default y
help
Option to disable or enable triggering errors in SNMP on a port
choice
prompt "Profile"
default PORT03_INST01_PROFILE_WR
config PORT03_INST01_PROFILE_PTP
bool "PTP"
config PORT03_INST01_PROFILE_WR
bool "White Rabbit"
config PORT03_INST01_PROFILE_CUSTOM
bool "Custom"
endchoice
choice
prompt "Desired state"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
default PORT03_INST01_DESIRADE_STATE_MASTER
config PORT03_INST01_DESIRADE_STATE_MASTER
bool "Master"
config PORT03_INST01_DESIRADE_STATE_SLAVE
bool "Slave"
config PORT03_INST01_DESIRADE_STATE_PASSIVE
bool "Passive"
endchoice
config PORT03_INST01_ASYMMETRY_CORRECTION_ENABLE
depends on !PORT03_INST01_PROFILE_HA && !PORT03_INST01_PROFILE_WR
bool "asymmetryCorrectionPortDS.enable"
default y
help
When supported, the value TRUE shall indicate that the mechanism of for the calculation
of the <delayAsymmetry> for certain media is enabled on the PTP port.
choice
prompt "BMCA mode"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
default PORT03_INST01_BMODE_MASTER_ONLY if TIME_GM || TIME_FM
default PORT03_INST01_BMODE_AUTO if TIME_BC
config PORT03_INST01_BMODE_MASTER_ONLY
bool "MasterOnly"
config PORT03_INST01_BMODE_AUTO
bool "Auto"
endchoice
config PORT03_INST01_EGRESS_LATENCY
int "timestampCorrectionPortDS.egressLatency (ps)"
default 224142
help
Defines the transmission constant delay (ps)
config PORT03_INST01_INGRESS_LATENCY
int "timestampCorrectionPortDS.ingressLatency (ps)"
default 226638
help
Defines the reception constant delay (ps)
config PORT03_INST01_ANNOUNCE_INTERVAL
int "logAnnounceInterval"
default 1
range 0 4
help
The mean time interval between transmissions of successive
Announce messages. The value is the logarithm to the base 2.
The configurable range shall be 0 to 4.
config PORT03_INST01_ANNOUNCE_RECEIPT_TIMEOUT
int "announceReceiptTimeout"
default 3
range 2 255
help
The announceReceiptTimeout specifies the number of announceIntervals
that must pass without receipt of an Announce message before the
occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 255
config PORT03_INST01_SYNC_INTERVAL
int "logSyncInterval"
default 0
range -1 1
help
The mean time interval between transmission of successive
Sync messages, i.e., the sync-interval, when transmitted
as multicast messages. The value is the logarithm to the base 2.
The configurable range shall be -1 to +1
config PORT03_INST01_MIN_DELAY_REQ_INTERVAL
depends on PORT03_INST01_MECHANISM_E2E
int "minDelayRequestInterval"
default 0
range 0 5
help
The minDelayRequestInterval specifies the minimum permitted
mean time interval between successive Delay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT03_INST01_MIN_PDELAY_REQ_INTERVAL
depends on PORT03_INST01_MECHANISM_P2P
int "minPDelayRequestInterval"
default 0
range 0 5
help
The minPDelayRequestInterval specifies the minimum permitted
mean time interval between successive Pdelay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT03_INST01_L1SYNC_ENABLED
depends on PORT03_INST01_PROFILE_CUSTOM
bool "L1SyncBasicPortDS.L1SyncEnabled"
default y
help
This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled
config PORT03_INST01_L1SYNC_INTERVAL
depends on PORT03_INST01_PROFILE_HA || (PORT03_INST01_PROFILE_CUSTOM && PORT03_INST01_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.logL1SyncInterval"
default 0
range -4 4
help
The L1Sync interval specifies the time interval
between successive periodic L1_SYNC TLV.
The value is the logarithm to the base 2.
The configurable range shall be -4 to 4
config PORT03_INST01_L1SYNC_RECEIPT_TIMEOUT
depends on PORT03_INST01_PROFILE_HA || (PORT03_INST01_PROFILE_CUSTOM && PORT03_INST01_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
default 3
range 2 10
help
The value of L1SyncReceiptTimeout specifies the number of elapsed L1SyncIntervals that must pass without reception of the L1_SYNC TLV
before the L1_SYNC TLV reception timeout occurs.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 10
config PORT03_INST01_L1SYNC_TX_COHERENCY_IS_REQUIRED
depends on PORT03_INST01_PROFILE_CUSTOM && PORT03_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.txCoherencyIsRequired"
default y
help
The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a transmit coherent port.
config PORT03_INST01_L1SYNC_RX_COHERENCY_IS_REQUIRED
depends on PORT03_INST01_PROFILE_CUSTOM && PORT03_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
default y
help
The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a receive coherent port.
config PORT03_INST01_L1SYNC_CONGRUENCY_IS_REQUIRED
depends on PORT03_INST01_PROFILE_CUSTOM && PORT03_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.congruencyIsRequired"
default y
help
The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
be a congruent port
config PORT03_INST01_L1SYNC_OPT_PARAMS_ENABLED
depends on PORT03_INST01_PROFILE_CUSTOM && PORT03_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.optParamsEnabled"
default n
help
The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
TLV extends this TLV with the information about the optional parameters.
config PORT03_INST01_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
depends on PORT03_INST01_L1SYNC_OPT_PARAMS_ENABLED="y"
bool "L1SyncBasicPortDS.timestampsCorrectedTx"
default n
help
When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE,
the L1Sync port shall correct the transmitted egress timestamps with
the known value of the phase offset.
endmenu
menu "Instance 2"
depends on PORT03_INSTANCE_COUNT_2
choice
prompt "Network protocol"
default PORT03_INST02_PROTOCOL_RAW
config PORT03_INST02_PROTOCOL_RAW
bool "IEEE 802.3"
config PORT03_INST02_PROTOCOL_UDP_IPV4
bool "UDP/Ipv4"
endchoice
choice
prompt "Delay mechanism"
default PORT03_INST02_MECHANISM_E2E
config PORT03_INST02_MECHANISM_E2E
bool "End-to-end"
config PORT03_INST02_MECHANISM_P2P
bool "Peer-to-peer"endchoice
config PORT03_INST02_MONITOR
bool "SNMP monitoring"
default y
help
Option to disable or enable triggering errors in SNMP on a port
choice
prompt "Profile"
default PORT03_INST02_PROFILE_WR
config PORT03_INST02_PROFILE_PTP
bool "PTP"
config PORT03_INST02_PROFILE_WR
bool "White Rabbit"
config PORT03_INST02_PROFILE_CUSTOM
bool "Custom"
endchoice
choice
prompt "Desired state"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
default PORT03_INST02_DESIRADE_STATE_MASTER
config PORT03_INST02_DESIRADE_STATE_MASTER
bool "Master"
config PORT03_INST02_DESIRADE_STATE_SLAVE
bool "Slave"
config PORT03_INST02_DESIRADE_STATE_PASSIVE
bool "Passive"
endchoice
config PORT03_INST02_ASYMMETRY_CORRECTION_ENABLE
depends on !PORT03_INST02_PROFILE_HA && !PORT03_INST02_PROFILE_WR
bool "asymmetryCorrectionPortDS.enable"
default y
help
When supported, the value TRUE shall indicate that the mechanism of for the calculation
of the <delayAsymmetry> for certain media is enabled on the PTP port.
choice
prompt "BMCA mode"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
default PORT03_INST02_BMODE_MASTER_ONLY if TIME_GM || TIME_FM
default PORT03_INST02_BMODE_AUTO if TIME_BC
config PORT03_INST02_BMODE_MASTER_ONLY
bool "MasterOnly"
config PORT03_INST02_BMODE_AUTO
bool "Auto"
endchoice
config PORT03_INST02_EGRESS_LATENCY
int "timestampCorrectionPortDS.egressLatency (ps)"
default 224142
help
Defines the transmission constant delay (ps)
config PORT03_INST02_INGRESS_LATENCY
int "timestampCorrectionPortDS.ingressLatency (ps)"
default 226638
help
Defines the reception constant delay (ps)
config PORT03_INST02_ANNOUNCE_INTERVAL
int "logAnnounceInterval"
default 1
range 0 4
help
The mean time interval between transmissions of successive
Announce messages. The value is the logarithm to the base 2.
The configurable range shall be 0 to 4.
config PORT03_INST02_ANNOUNCE_RECEIPT_TIMEOUT
int "announceReceiptTimeout"
default 3
range 2 255
help
The announceReceiptTimeout specifies the number of announceIntervals
that must pass without receipt of an Announce message before the
occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 255
config PORT03_INST02_SYNC_INTERVAL
int "logSyncInterval"
default 0
range -1 1
help
The mean time interval between transmission of successive
Sync messages, i.e., the sync-interval, when transmitted
as multicast messages. The value is the logarithm to the base 2.
The configurable range shall be -1 to +1
config PORT03_INST02_MIN_DELAY_REQ_INTERVAL
depends on PORT03_INST02_MECHANISM_E2E
int "minDelayRequestInterval"
default 0
range 0 5
help
The minDelayRequestInterval specifies the minimum permitted
mean time interval between successive Delay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT03_INST02_MIN_PDELAY_REQ_INTERVAL
depends on PORT03_INST02_MECHANISM_P2P
int "minPDelayRequestInterval"
default 0
range 0 5
help
The minPDelayRequestInterval specifies the minimum permitted
mean time interval between successive Pdelay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT03_INST02_L1SYNC_ENABLED
depends on PORT03_INST02_PROFILE_CUSTOM
bool "L1SyncBasicPortDS.L1SyncEnabled"
default y
help
This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled
config PORT03_INST02_L1SYNC_INTERVAL
depends on PORT03_INST02_PROFILE_HA || (PORT03_INST02_PROFILE_CUSTOM && PORT03_INST02_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.logL1SyncInterval"
default 0
range -4 4
help
The L1Sync interval specifies the time interval
between successive periodic L1_SYNC TLV.
The value is the logarithm to the base 2.
The configurable range shall be -4 to 4
config PORT03_INST02_L1SYNC_RECEIPT_TIMEOUT
depends on PORT03_INST02_PROFILE_HA || (PORT03_INST02_PROFILE_CUSTOM && PORT03_INST02_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
default 3
range 2 10
help
The value of L1SyncReceiptTimeout specifies the number of elapsed L1SyncIntervals that must pass without reception of the L1_SYNC TLV
before the L1_SYNC TLV reception timeout occurs.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 10
config PORT03_INST02_L1SYNC_TX_COHERENCY_IS_REQUIRED
depends on PORT03_INST02_PROFILE_CUSTOM && PORT03_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.txCoherencyIsRequired"
default y
help
The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a transmit coherent port.
config PORT03_INST02_L1SYNC_RX_COHERENCY_IS_REQUIRED
depends on PORT03_INST02_PROFILE_CUSTOM && PORT03_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
default y
help
The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a receive coherent port.
config PORT03_INST02_L1SYNC_CONGRUENCY_IS_REQUIRED
depends on PORT03_INST02_PROFILE_CUSTOM && PORT03_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.congruencyIsRequired"
default y
help
The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
be a congruent port
config PORT03_INST02_L1SYNC_OPT_PARAMS_ENABLED
depends on PORT03_INST02_PROFILE_CUSTOM && PORT03_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.optParamsEnabled"
default n
help
The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
TLV extends this TLV with the information about the optional parameters.
config PORT03_INST02_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
depends on PORT03_INST02_L1SYNC_OPT_PARAMS_ENABLED="y"
bool "L1SyncBasicPortDS.timestampsCorrectedTx"
default n
help
When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE,
the L1Sync port shall correct the transmitted egress timestamps with
the known value of the phase offset.
endmenu
endmenu
menu "PORT 4"
config PORT04_IFACE
string "Network interface"
default "wri4"
help
Used to set the physical port interface name: "wri[1-18]"
config PORT04_FIBER
int "Fiber type"
default 0
help
Used to set the type of fiber (number referring to the corresponding
FIBERXX_PARAMS)
config PORT04_CONSTANT_ASYMMETRY
int "asymmetryCorrectionPortDS.constantAsymmetry" default 0
help
Used to set the constant delay asymmetry.
choice
prompt "Number of port instances"
default PORT04_INSTANCE_COUNT_1
config PORT04_INSTANCE_COUNT_0
bool "0"
config PORT04_INSTANCE_COUNT_1
bool "1"
config PORT04_INSTANCE_COUNT_2
bool "2"
endchoice
menu "Instance 1"
depends on PORT04_INSTANCE_COUNT_1 || PORT04_INSTANCE_COUNT_2
choice
prompt "Network protocol"
default PORT04_INST01_PROTOCOL_RAW
config PORT04_INST01_PROTOCOL_RAW
bool "IEEE 802.3"
config PORT04_INST01_PROTOCOL_UDP_IPV4
bool "UDP/Ipv4"
endchoice
choice
prompt "Delay mechanism"
default PORT04_INST01_MECHANISM_E2E
config PORT04_INST01_MECHANISM_E2E
bool "End-to-end"
config PORT04_INST01_MECHANISM_P2P
bool "Peer-to-peer"
endchoice
config PORT04_INST01_MONITOR
bool "SNMP monitoring"
default y
help
Option to disable or enable triggering errors in SNMP on a port
choice
prompt "Profile"
default PORT04_INST01_PROFILE_WR
config PORT04_INST01_PROFILE_PTP
bool "PTP"
config PORT04_INST01_PROFILE_WR
bool "White Rabbit"
config PORT04_INST01_PROFILE_CUSTOM
bool "Custom"
endchoice
choice
prompt "Desired state"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
default PORT04_INST01_DESIRADE_STATE_MASTER
config PORT04_INST01_DESIRADE_STATE_MASTER
bool "Master"
config PORT04_INST01_DESIRADE_STATE_SLAVE
bool "Slave"
config PORT04_INST01_DESIRADE_STATE_PASSIVE
bool "Passive"
endchoice
config PORT04_INST01_ASYMMETRY_CORRECTION_ENABLE
depends on !PORT04_INST01_PROFILE_HA && !PORT04_INST01_PROFILE_WR
bool "asymmetryCorrectionPortDS.enable"
default y
help When supported, the value TRUE shall indicate that the mechanism of for the calculation
of the <delayAsymmetry> for certain media is enabled on the PTP port.
choice
prompt "BMCA mode"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
default PORT04_INST01_BMODE_MASTER_ONLY if TIME_GM || TIME_FM
default PORT04_INST01_BMODE_AUTO if TIME_BC
config PORT04_INST01_BMODE_MASTER_ONLY
bool "MasterOnly"
config PORT04_INST01_BMODE_AUTO
bool "Auto"
endchoice
config PORT04_INST01_EGRESS_LATENCY
int "timestampCorrectionPortDS.egressLatency (ps)"
default 224313
help
Defines the transmission constant delay (ps)
config PORT04_INST01_INGRESS_LATENCY
int "timestampCorrectionPortDS.ingressLatency (ps)"
default 226471
help
Defines the reception constant delay (ps)
config PORT04_INST01_ANNOUNCE_INTERVAL
int "logAnnounceInterval"
default 1
range 0 4
help
The mean time interval between transmissions of successive
Announce messages. The value is the logarithm to the base 2.
The configurable range shall be 0 to 4.
config PORT04_INST01_ANNOUNCE_RECEIPT_TIMEOUT
int "announceReceiptTimeout"
default 3
range 2 255
help
The announceReceiptTimeout specifies the number of announceIntervals
that must pass without receipt of an Announce message before the
occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 255
config PORT04_INST01_SYNC_INTERVAL
int "logSyncInterval"
default 0
range -1 1
help
The mean time interval between transmission of successive
Sync messages, i.e., the sync-interval, when transmitted
as multicast messages. The value is the logarithm to the base 2.
The configurable range shall be -1 to +1
config PORT04_INST01_MIN_DELAY_REQ_INTERVAL
depends on PORT04_INST01_MECHANISM_E2E
int "minDelayRequestInterval"
default 0
range 0 5
help
The minDelayRequestInterval specifies the minimum permitted
mean time interval between successive Delay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT04_INST01_MIN_PDELAY_REQ_INTERVAL
depends on PORT04_INST01_MECHANISM_P2P
int "minPDelayRequestInterval" default 0
range 0 5
help
The minPDelayRequestInterval specifies the minimum permitted
mean time interval between successive Pdelay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT04_INST01_L1SYNC_ENABLED
depends on PORT04_INST01_PROFILE_CUSTOM
bool "L1SyncBasicPortDS.L1SyncEnabled"
default y
help
This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled
config PORT04_INST01_L1SYNC_INTERVAL
depends on PORT04_INST01_PROFILE_HA || (PORT04_INST01_PROFILE_CUSTOM && PORT04_INST01_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.logL1SyncInterval"
default 0
range -4 4
help
The L1Sync interval specifies the time interval
between successive periodic L1_SYNC TLV.
The value is the logarithm to the base 2.
The configurable range shall be -4 to 4
config PORT04_INST01_L1SYNC_RECEIPT_TIMEOUT
depends on PORT04_INST01_PROFILE_HA || (PORT04_INST01_PROFILE_CUSTOM && PORT04_INST01_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
default 3
range 2 10
help
The value of L1SyncReceiptTimeout specifies the number of elapsed
L1SyncIntervals that must pass without reception of the L1_SYNC TLV
before the L1_SYNC TLV reception timeout occurs.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 10
config PORT04_INST01_L1SYNC_TX_COHERENCY_IS_REQUIRED
depends on PORT04_INST01_PROFILE_CUSTOM && PORT04_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.txCoherencyIsRequired"
default y
help
The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a transmit coherent port.
config PORT04_INST01_L1SYNC_RX_COHERENCY_IS_REQUIRED
depends on PORT04_INST01_PROFILE_CUSTOM && PORT04_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
default y
help
The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a receive coherent port.
config PORT04_INST01_L1SYNC_CONGRUENCY_IS_REQUIRED
depends on PORT04_INST01_PROFILE_CUSTOM && PORT04_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.congruencyIsRequired"
default y
help
The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
be a congruent port
config PORT04_INST01_L1SYNC_OPT_PARAMS_ENABLED
depends on PORT04_INST01_PROFILE_CUSTOM && PORT04_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.optParamsEnabled"
default n help
The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
TLV extends this TLV with the information about the optional parameters.
config PORT04_INST01_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
depends on PORT04_INST01_L1SYNC_OPT_PARAMS_ENABLED="y"
bool "L1SyncBasicPortDS.timestampsCorrectedTx"
default n
help
When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE,
the L1Sync port shall correct the transmitted egress timestamps with
the known value of the phase offset.
endmenu
menu "Instance 2"
depends on PORT04_INSTANCE_COUNT_2
choice
prompt "Network protocol"
default PORT04_INST02_PROTOCOL_RAW
config PORT04_INST02_PROTOCOL_RAW
bool "IEEE 802.3"
config PORT04_INST02_PROTOCOL_UDP_IPV4
bool "UDP/Ipv4"
endchoice
choice
prompt "Delay mechanism"
default PORT04_INST02_MECHANISM_E2E
config PORT04_INST02_MECHANISM_E2E
bool "End-to-end"
config PORT04_INST02_MECHANISM_P2P
bool "Peer-to-peer"
endchoice
config PORT04_INST02_MONITOR
bool "SNMP monitoring"
default y
help
Option to disable or enable triggering errors in SNMP on a port
choice
prompt "Profile"
default PORT04_INST02_PROFILE_WR
config PORT04_INST02_PROFILE_PTP
bool "PTP"
config PORT04_INST02_PROFILE_WR
bool "White Rabbit"
config PORT04_INST02_PROFILE_CUSTOM
bool "Custom"
endchoice
choice
prompt "Desired state"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
default PORT04_INST02_DESIRADE_STATE_MASTER
config PORT04_INST02_DESIRADE_STATE_MASTER
bool "Master"
config PORT04_INST02_DESIRADE_STATE_SLAVE
bool "Slave"
config PORT04_INST02_DESIRADE_STATE_PASSIVE
bool "Passive"
endchoice
config PORT04_INST02_ASYMMETRY_CORRECTION_ENABLE
depends on !PORT04_INST02_PROFILE_HA && !PORT04_INST02_PROFILE_WR
bool "asymmetryCorrectionPortDS.enable"
default y
help When supported, the value TRUE shall indicate that the mechanism of for the calculation
of the <delayAsymmetry> for certain media is enabled on the PTP port.
choice
prompt "BMCA mode"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
default PORT04_INST02_BMODE_MASTER_ONLY if TIME_GM || TIME_FM
default PORT04_INST02_BMODE_AUTO if TIME_BC
config PORT04_INST02_BMODE_MASTER_ONLY
bool "MasterOnly"
config PORT04_INST02_BMODE_AUTO
bool "Auto"
endchoice
config PORT04_INST02_EGRESS_LATENCY
int "timestampCorrectionPortDS.egressLatency (ps)"
default 224313
help
Defines the transmission constant delay (ps)
config PORT04_INST02_INGRESS_LATENCY
int "timestampCorrectionPortDS.ingressLatency (ps)"
default 226471
help
Defines the reception constant delay (ps)
config PORT04_INST02_ANNOUNCE_INTERVAL
int "logAnnounceInterval"
default 1
range 0 4
help
The mean time interval between transmissions of successive
Announce messages. The value is the logarithm to the base 2.
The configurable range shall be 0 to 4.
config PORT04_INST02_ANNOUNCE_RECEIPT_TIMEOUT
int "announceReceiptTimeout"
default 3
range 2 255
help
The announceReceiptTimeout specifies the number of announceIntervals
that must pass without receipt of an Announce message before the
occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 255
config PORT04_INST02_SYNC_INTERVAL
int "logSyncInterval"
default 0
range -1 1
help
The mean time interval between transmission of successive
Sync messages, i.e., the sync-interval, when transmitted
as multicast messages. The value is the logarithm to the base 2.
The configurable range shall be -1 to +1
config PORT04_INST02_MIN_DELAY_REQ_INTERVAL
depends on PORT04_INST02_MECHANISM_E2E
int "minDelayRequestInterval"
default 0
range 0 5
help
The minDelayRequestInterval specifies the minimum permitted
mean time interval between successive Delay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT04_INST02_MIN_PDELAY_REQ_INTERVAL
depends on PORT04_INST02_MECHANISM_P2P
int "minPDelayRequestInterval" default 0
range 0 5
help
The minPDelayRequestInterval specifies the minimum permitted
mean time interval between successive Pdelay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT04_INST02_L1SYNC_ENABLED
depends on PORT04_INST02_PROFILE_CUSTOM
bool "L1SyncBasicPortDS.L1SyncEnabled"
default y
help
This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled
config PORT04_INST02_L1SYNC_INTERVAL
depends on PORT04_INST02_PROFILE_HA || (PORT04_INST02_PROFILE_CUSTOM && PORT04_INST02_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.logL1SyncInterval"
default 0
range -4 4
help
The L1Sync interval specifies the time interval
between successive periodic L1_SYNC TLV.
The value is the logarithm to the base 2.
The configurable range shall be -4 to 4
config PORT04_INST02_L1SYNC_RECEIPT_TIMEOUT
depends on PORT04_INST02_PROFILE_HA || (PORT04_INST02_PROFILE_CUSTOM && PORT04_INST02_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
default 3
range 2 10
help
The value of L1SyncReceiptTimeout specifies the number of elapsed
L1SyncIntervals that must pass without reception of the L1_SYNC TLV
before the L1_SYNC TLV reception timeout occurs.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 10
config PORT04_INST02_L1SYNC_TX_COHERENCY_IS_REQUIRED
depends on PORT04_INST02_PROFILE_CUSTOM && PORT04_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.txCoherencyIsRequired"
default y
help
The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a transmit coherent port.
config PORT04_INST02_L1SYNC_RX_COHERENCY_IS_REQUIRED
depends on PORT04_INST02_PROFILE_CUSTOM && PORT04_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
default y
help
The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a receive coherent port.
config PORT04_INST02_L1SYNC_CONGRUENCY_IS_REQUIRED
depends on PORT04_INST02_PROFILE_CUSTOM && PORT04_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.congruencyIsRequired"
default y
help
The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
be a congruent port
config PORT04_INST02_L1SYNC_OPT_PARAMS_ENABLED
depends on PORT04_INST02_PROFILE_CUSTOM && PORT04_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.optParamsEnabled"
default n help
The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
TLV extends this TLV with the information about the optional parameters.
config PORT04_INST02_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
depends on PORT04_INST02_L1SYNC_OPT_PARAMS_ENABLED="y"
bool "L1SyncBasicPortDS.timestampsCorrectedTx"
default n
help
When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE,
the L1Sync port shall correct the transmitted egress timestamps with
the known value of the phase offset.
endmenu
endmenu
menu "PORT 5"
config PORT05_IFACE
string "Network interface"
default "wri5"
help
Used to set the physical port interface name: "wri[1-18]"
config PORT05_FIBER
int "Fiber type"
default 0
help
Used to set the type of fiber (number referring to the corresponding
FIBERXX_PARAMS)
config PORT05_CONSTANT_ASYMMETRY
int "asymmetryCorrectionPortDS.constantAsymmetry"
default 0
help
Used to set the constant delay asymmetry.
choice
prompt "Number of port instances"
default PORT05_INSTANCE_COUNT_1
config PORT05_INSTANCE_COUNT_0
bool "0"
config PORT05_INSTANCE_COUNT_1
bool "1"
config PORT05_INSTANCE_COUNT_2
bool "2"
endchoice
menu "Instance 1"
depends on PORT05_INSTANCE_COUNT_1 || PORT05_INSTANCE_COUNT_2
choice
prompt "Network protocol"
default PORT05_INST01_PROTOCOL_RAW
config PORT05_INST01_PROTOCOL_RAW
bool "IEEE 802.3"
config PORT05_INST01_PROTOCOL_UDP_IPV4
bool "UDP/Ipv4"
endchoice
choice
prompt "Delay mechanism"
default PORT05_INST01_MECHANISM_E2E
config PORT05_INST01_MECHANISM_E2E
bool "End-to-end"
config PORT05_INST01_MECHANISM_P2P
bool "Peer-to-peer"
endchoice
config PORT05_INST01_MONITOR
bool "SNMP monitoring"
default y
help
Option to disable or enable triggering errors in SNMP on a port
choice
prompt "Profile"
default PORT05_INST01_PROFILE_WR
config PORT05_INST01_PROFILE_PTP
bool "PTP"
config PORT05_INST01_PROFILE_WR
bool "White Rabbit"
config PORT05_INST01_PROFILE_CUSTOM
bool "Custom"
endchoice
choice
prompt "Desired state"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
default PORT05_INST01_DESIRADE_STATE_MASTER
config PORT05_INST01_DESIRADE_STATE_MASTER
bool "Master"
config PORT05_INST01_DESIRADE_STATE_SLAVE
bool "Slave"
config PORT05_INST01_DESIRADE_STATE_PASSIVE
bool "Passive"
endchoice
config PORT05_INST01_ASYMMETRY_CORRECTION_ENABLE
depends on !PORT05_INST01_PROFILE_HA && !PORT05_INST01_PROFILE_WR
bool "asymmetryCorrectionPortDS.enable"
default y
help
When supported, the value TRUE shall indicate that the mechanism of for the calculation
of the <delayAsymmetry> for certain media is enabled on the PTP port.
choice
prompt "BMCA mode"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
default PORT05_INST01_BMODE_MASTER_ONLY if TIME_GM || TIME_FM
default PORT05_INST01_BMODE_AUTO if TIME_BC
config PORT05_INST01_BMODE_MASTER_ONLY
bool "MasterOnly"
config PORT05_INST01_BMODE_AUTO
bool "Auto"
endchoice
config PORT05_INST01_EGRESS_LATENCY
int "timestampCorrectionPortDS.egressLatency (ps)"
default 224455
help
Defines the transmission constant delay (ps)
config PORT05_INST01_INGRESS_LATENCY
int "timestampCorrectionPortDS.ingressLatency (ps)"
default 227679
help
Defines the reception constant delay (ps)
config PORT05_INST01_ANNOUNCE_INTERVAL
int "logAnnounceInterval"
default 1
range 0 4
help
The mean time interval between transmissions of successive
Announce messages. The value is the logarithm to the base 2.
The configurable range shall be 0 to 4.
config PORT05_INST01_ANNOUNCE_RECEIPT_TIMEOUT int "announceReceiptTimeout"
default 3
range 2 255
help
The announceReceiptTimeout specifies the number of announceIntervals
that must pass without receipt of an Announce message before the
occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 255
config PORT05_INST01_SYNC_INTERVAL
int "logSyncInterval"
default 0
range -1 1
help
The mean time interval between transmission of successive
Sync messages, i.e., the sync-interval, when transmitted
as multicast messages. The value is the logarithm to the base 2.
The configurable range shall be -1 to +1
config PORT05_INST01_MIN_DELAY_REQ_INTERVAL
depends on PORT05_INST01_MECHANISM_E2E
int "minDelayRequestInterval"
default 0
range 0 5
help
The minDelayRequestInterval specifies the minimum permitted
mean time interval between successive Delay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT05_INST01_MIN_PDELAY_REQ_INTERVAL
depends on PORT05_INST01_MECHANISM_P2P
int "minPDelayRequestInterval"
default 0
range 0 5
help
The minPDelayRequestInterval specifies the minimum permitted
mean time interval between successive Pdelay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT05_INST01_L1SYNC_ENABLED
depends on PORT05_INST01_PROFILE_CUSTOM
bool "L1SyncBasicPortDS.L1SyncEnabled"
default y
help
This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled
config PORT05_INST01_L1SYNC_INTERVAL
depends on PORT05_INST01_PROFILE_HA || (PORT05_INST01_PROFILE_CUSTOM && PORT05_INST01_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.logL1SyncInterval"
default 0
range -4 4
help
The L1Sync interval specifies the time interval
between successive periodic L1_SYNC TLV.
The value is the logarithm to the base 2.
The configurable range shall be -4 to 4
config PORT05_INST01_L1SYNC_RECEIPT_TIMEOUT
depends on PORT05_INST01_PROFILE_HA || (PORT05_INST01_PROFILE_CUSTOM && PORT05_INST01_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
default 3
range 2 10
help
The value of L1SyncReceiptTimeout specifies the number of elapsed
L1SyncIntervals that must pass without reception of the L1_SYNC TLV
before the L1_SYNC TLV reception timeout occurs. The value is the logarithm to the base 2.
The configurable range shall be 2 to 10
config PORT05_INST01_L1SYNC_TX_COHERENCY_IS_REQUIRED
depends on PORT05_INST01_PROFILE_CUSTOM && PORT05_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.txCoherencyIsRequired"
default y
help
The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a transmit coherent port.
config PORT05_INST01_L1SYNC_RX_COHERENCY_IS_REQUIRED
depends on PORT05_INST01_PROFILE_CUSTOM && PORT05_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
default y
help
The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a receive coherent port.
config PORT05_INST01_L1SYNC_CONGRUENCY_IS_REQUIRED
depends on PORT05_INST01_PROFILE_CUSTOM && PORT05_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.congruencyIsRequired"
default y
help
The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
be a congruent port
config PORT05_INST01_L1SYNC_OPT_PARAMS_ENABLED
depends on PORT05_INST01_PROFILE_CUSTOM && PORT05_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.optParamsEnabled"
default n
help
The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
TLV extends this TLV with the information about the optional parameters.
config PORT05_INST01_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
depends on PORT05_INST01_L1SYNC_OPT_PARAMS_ENABLED="y"
bool "L1SyncBasicPortDS.timestampsCorrectedTx"
default n
help
When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE,
the L1Sync port shall correct the transmitted egress timestamps with
the known value of the phase offset.
endmenu
menu "Instance 2"
depends on PORT05_INSTANCE_COUNT_2
choice
prompt "Network protocol"
default PORT05_INST02_PROTOCOL_RAW
config PORT05_INST02_PROTOCOL_RAW
bool "IEEE 802.3"
config PORT05_INST02_PROTOCOL_UDP_IPV4
bool "UDP/Ipv4"
endchoice
choice
prompt "Delay mechanism"
default PORT05_INST02_MECHANISM_E2E
config PORT05_INST02_MECHANISM_E2E
bool "End-to-end"
config PORT05_INST02_MECHANISM_P2P
bool "Peer-to-peer"
endchoice
config PORT05_INST02_MONITOR
bool "SNMP monitoring"
default y
help
Option to disable or enable triggering errors in SNMP on a port
choice
prompt "Profile"
default PORT05_INST02_PROFILE_WR
config PORT05_INST02_PROFILE_PTP
bool "PTP"
config PORT05_INST02_PROFILE_WR
bool "White Rabbit"
config PORT05_INST02_PROFILE_CUSTOM
bool "Custom"
endchoice
choice
prompt "Desired state"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
default PORT05_INST02_DESIRADE_STATE_MASTER
config PORT05_INST02_DESIRADE_STATE_MASTER
bool "Master"
config PORT05_INST02_DESIRADE_STATE_SLAVE
bool "Slave"
config PORT05_INST02_DESIRADE_STATE_PASSIVE
bool "Passive"
endchoice
config PORT05_INST02_ASYMMETRY_CORRECTION_ENABLE
depends on !PORT05_INST02_PROFILE_HA && !PORT05_INST02_PROFILE_WR
bool "asymmetryCorrectionPortDS.enable"
default y
help
When supported, the value TRUE shall indicate that the mechanism of for the calculation
of the <delayAsymmetry> for certain media is enabled on the PTP port.
choice
prompt "BMCA mode"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
default PORT05_INST02_BMODE_MASTER_ONLY if TIME_GM || TIME_FM
default PORT05_INST02_BMODE_AUTO if TIME_BC
config PORT05_INST02_BMODE_MASTER_ONLY
bool "MasterOnly"
config PORT05_INST02_BMODE_AUTO
bool "Auto"
endchoice
config PORT05_INST02_EGRESS_LATENCY
int "timestampCorrectionPortDS.egressLatency (ps)"
default 224455
help
Defines the transmission constant delay (ps)
config PORT05_INST02_INGRESS_LATENCY
int "timestampCorrectionPortDS.ingressLatency (ps)"
default 227679
help
Defines the reception constant delay (ps)
config PORT05_INST02_ANNOUNCE_INTERVAL
int "logAnnounceInterval"
default 1
range 0 4
help
The mean time interval between transmissions of successive
Announce messages. The value is the logarithm to the base 2.
The configurable range shall be 0 to 4.
config PORT05_INST02_ANNOUNCE_RECEIPT_TIMEOUT int "announceReceiptTimeout"
default 3
range 2 255
help
The announceReceiptTimeout specifies the number of announceIntervals
that must pass without receipt of an Announce message before the
occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 255
config PORT05_INST02_SYNC_INTERVAL
int "logSyncInterval"
default 0
range -1 1
help
The mean time interval between transmission of successive
Sync messages, i.e., the sync-interval, when transmitted
as multicast messages. The value is the logarithm to the base 2.
The configurable range shall be -1 to +1
config PORT05_INST02_MIN_DELAY_REQ_INTERVAL
depends on PORT05_INST02_MECHANISM_E2E
int "minDelayRequestInterval"
default 0
range 0 5
help
The minDelayRequestInterval specifies the minimum permitted
mean time interval between successive Delay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT05_INST02_MIN_PDELAY_REQ_INTERVAL
depends on PORT05_INST02_MECHANISM_P2P
int "minPDelayRequestInterval"
default 0
range 0 5
help
The minPDelayRequestInterval specifies the minimum permitted
mean time interval between successive Pdelay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT05_INST02_L1SYNC_ENABLED
depends on PORT05_INST02_PROFILE_CUSTOM
bool "L1SyncBasicPortDS.L1SyncEnabled"
default y
help
This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled
config PORT05_INST02_L1SYNC_INTERVAL
depends on PORT05_INST02_PROFILE_HA || (PORT05_INST02_PROFILE_CUSTOM && PORT05_INST02_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.logL1SyncInterval"
default 0
range -4 4
help
The L1Sync interval specifies the time interval
between successive periodic L1_SYNC TLV.
The value is the logarithm to the base 2.
The configurable range shall be -4 to 4
config PORT05_INST02_L1SYNC_RECEIPT_TIMEOUT
depends on PORT05_INST02_PROFILE_HA || (PORT05_INST02_PROFILE_CUSTOM && PORT05_INST02_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
default 3
range 2 10
help
The value of L1SyncReceiptTimeout specifies the number of elapsed
L1SyncIntervals that must pass without reception of the L1_SYNC TLV
before the L1_SYNC TLV reception timeout occurs. The value is the logarithm to the base 2.
The configurable range shall be 2 to 10
config PORT05_INST02_L1SYNC_TX_COHERENCY_IS_REQUIRED
depends on PORT05_INST02_PROFILE_CUSTOM && PORT05_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.txCoherencyIsRequired"
default y
help
The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a transmit coherent port.
config PORT05_INST02_L1SYNC_RX_COHERENCY_IS_REQUIRED
depends on PORT05_INST02_PROFILE_CUSTOM && PORT05_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
default y
help
The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a receive coherent port.
config PORT05_INST02_L1SYNC_CONGRUENCY_IS_REQUIRED
depends on PORT05_INST02_PROFILE_CUSTOM && PORT05_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.congruencyIsRequired"
default y
help
The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
be a congruent port
config PORT05_INST02_L1SYNC_OPT_PARAMS_ENABLED
depends on PORT05_INST02_PROFILE_CUSTOM && PORT05_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.optParamsEnabled"
default n
help
The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
TLV extends this TLV with the information about the optional parameters.
config PORT05_INST02_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
depends on PORT05_INST02_L1SYNC_OPT_PARAMS_ENABLED="y"
bool "L1SyncBasicPortDS.timestampsCorrectedTx"
default n
help
When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE,
the L1Sync port shall correct the transmitted egress timestamps with
the known value of the phase offset.
endmenu
endmenu
menu "PORT 6"
config PORT06_IFACE
string "Network interface"
default "wri6"
help
Used to set the physical port interface name: "wri[1-18]"
config PORT06_FIBER
int "Fiber type"
default 0
help
Used to set the type of fiber (number referring to the corresponding
FIBERXX_PARAMS)
config PORT06_CONSTANT_ASYMMETRY
int "asymmetryCorrectionPortDS.constantAsymmetry"
default 0
help Used to set the constant delay asymmetry.
choice
prompt "Number of port instances"
default PORT06_INSTANCE_COUNT_1
config PORT06_INSTANCE_COUNT_0
bool "0"
config PORT06_INSTANCE_COUNT_1
bool "1"
config PORT06_INSTANCE_COUNT_2
bool "2"
endchoice
menu "Instance 1"
depends on PORT06_INSTANCE_COUNT_1 || PORT06_INSTANCE_COUNT_2
choice
prompt "Network protocol"
default PORT06_INST01_PROTOCOL_RAW
config PORT06_INST01_PROTOCOL_RAW
bool "IEEE 802.3"
config PORT06_INST01_PROTOCOL_UDP_IPV4
bool "UDP/Ipv4"
endchoice
choice
prompt "Delay mechanism"
default PORT06_INST01_MECHANISM_E2E
config PORT06_INST01_MECHANISM_E2E
bool "End-to-end"
config PORT06_INST01_MECHANISM_P2P
bool "Peer-to-peer"
endchoice
config PORT06_INST01_MONITOR
bool "SNMP monitoring"
default y
help
Option to disable or enable triggering errors in SNMP on a port
choice
prompt "Profile"
default PORT06_INST01_PROFILE_WR
config PORT06_INST01_PROFILE_PTP
bool "PTP"
config PORT06_INST01_PROFILE_WR
bool "White Rabbit"
config PORT06_INST01_PROFILE_CUSTOM
bool "Custom"
endchoice
choice
prompt "Desired state"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
default PORT06_INST01_DESIRADE_STATE_MASTER
config PORT06_INST01_DESIRADE_STATE_MASTER
bool "Master"
config PORT06_INST01_DESIRADE_STATE_SLAVE
bool "Slave"
config PORT06_INST01_DESIRADE_STATE_PASSIVE
bool "Passive"
endchoice
config PORT06_INST01_ASYMMETRY_CORRECTION_ENABLE
depends on !PORT06_INST01_PROFILE_HA && !PORT06_INST01_PROFILE_WR
bool "asymmetryCorrectionPortDS.enable"
default y
help
When supported, the value TRUE shall indicate that the mechanism of for the calculation
of the <delayAsymmetry> for certain media is enabled on the PTP port.
choice
prompt "BMCA mode"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
default PORT06_INST01_BMODE_MASTER_ONLY if TIME_GM || TIME_FM
default PORT06_INST01_BMODE_AUTO if TIME_BC
config PORT06_INST01_BMODE_MASTER_ONLY
bool "MasterOnly"
config PORT06_INST01_BMODE_AUTO
bool "Auto"
endchoice
config PORT06_INST01_EGRESS_LATENCY
int "timestampCorrectionPortDS.egressLatency (ps)"
default 224603
help
Defines the transmission constant delay (ps)
config PORT06_INST01_INGRESS_LATENCY
int "timestampCorrectionPortDS.ingressLatency (ps)"
default 227891
help
Defines the reception constant delay (ps)
config PORT06_INST01_ANNOUNCE_INTERVAL
int "logAnnounceInterval"
default 1
range 0 4
help
The mean time interval between transmissions of successive
Announce messages. The value is the logarithm to the base 2.
The configurable range shall be 0 to 4.
config PORT06_INST01_ANNOUNCE_RECEIPT_TIMEOUT
int "announceReceiptTimeout"
default 3
range 2 255
help
The announceReceiptTimeout specifies the number of announceIntervals
that must pass without receipt of an Announce message before the
occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 255
config PORT06_INST01_SYNC_INTERVAL
int "logSyncInterval"
default 0
range -1 1
help
The mean time interval between transmission of successive
Sync messages, i.e., the sync-interval, when transmitted
as multicast messages. The value is the logarithm to the base 2.
The configurable range shall be -1 to +1
config PORT06_INST01_MIN_DELAY_REQ_INTERVAL
depends on PORT06_INST01_MECHANISM_E2E
int "minDelayRequestInterval"
default 0
range 0 5
help
The minDelayRequestInterval specifies the minimum permitted
mean time interval between successive Delay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT06_INST01_MIN_PDELAY_REQ_INTERVAL
depends on PORT06_INST01_MECHANISM_P2P
int "minPDelayRequestInterval"
default 0
range 0 5 help
The minPDelayRequestInterval specifies the minimum permitted
mean time interval between successive Pdelay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT06_INST01_L1SYNC_ENABLED
depends on PORT06_INST01_PROFILE_CUSTOM
bool "L1SyncBasicPortDS.L1SyncEnabled"
default y
help
This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled
config PORT06_INST01_L1SYNC_INTERVAL
depends on PORT06_INST01_PROFILE_HA || (PORT06_INST01_PROFILE_CUSTOM && PORT06_INST01_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.logL1SyncInterval"
default 0
range -4 4
help
The L1Sync interval specifies the time interval
between successive periodic L1_SYNC TLV.
The value is the logarithm to the base 2.
The configurable range shall be -4 to 4
config PORT06_INST01_L1SYNC_RECEIPT_TIMEOUT
depends on PORT06_INST01_PROFILE_HA || (PORT06_INST01_PROFILE_CUSTOM && PORT06_INST01_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
default 3
range 2 10
help
The value of L1SyncReceiptTimeout specifies the number of elapsed
L1SyncIntervals that must pass without reception of the L1_SYNC TLV
before the L1_SYNC TLV reception timeout occurs.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 10
config PORT06_INST01_L1SYNC_TX_COHERENCY_IS_REQUIRED
depends on PORT06_INST01_PROFILE_CUSTOM && PORT06_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.txCoherencyIsRequired"
default y
help
The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a transmit coherent port.
config PORT06_INST01_L1SYNC_RX_COHERENCY_IS_REQUIRED
depends on PORT06_INST01_PROFILE_CUSTOM && PORT06_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
default y
help
The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a receive coherent port.
config PORT06_INST01_L1SYNC_CONGRUENCY_IS_REQUIRED
depends on PORT06_INST01_PROFILE_CUSTOM && PORT06_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.congruencyIsRequired"
default y
help
The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
be a congruent port
config PORT06_INST01_L1SYNC_OPT_PARAMS_ENABLED
depends on PORT06_INST01_PROFILE_CUSTOM && PORT06_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.optParamsEnabled"
default n
help
The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC TLV extends this TLV with the information about the optional parameters.
config PORT06_INST01_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
depends on PORT06_INST01_L1SYNC_OPT_PARAMS_ENABLED="y"
bool "L1SyncBasicPortDS.timestampsCorrectedTx"
default n
help
When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE,
the L1Sync port shall correct the transmitted egress timestamps with
the known value of the phase offset.
endmenu
menu "Instance 2"
depends on PORT06_INSTANCE_COUNT_2
choice
prompt "Network protocol"
default PORT06_INST02_PROTOCOL_RAW
config PORT06_INST02_PROTOCOL_RAW
bool "IEEE 802.3"
config PORT06_INST02_PROTOCOL_UDP_IPV4
bool "UDP/Ipv4"
endchoice
choice
prompt "Delay mechanism"
default PORT06_INST02_MECHANISM_E2E
config PORT06_INST02_MECHANISM_E2E
bool "End-to-end"
config PORT06_INST02_MECHANISM_P2P
bool "Peer-to-peer"
endchoice
config PORT06_INST02_MONITOR
bool "SNMP monitoring"
default y
help
Option to disable or enable triggering errors in SNMP on a port
choice
prompt "Profile"
default PORT06_INST02_PROFILE_WR
config PORT06_INST02_PROFILE_PTP
bool "PTP"
config PORT06_INST02_PROFILE_WR
bool "White Rabbit"
config PORT06_INST02_PROFILE_CUSTOM
bool "Custom"
endchoice
choice
prompt "Desired state"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
default PORT06_INST02_DESIRADE_STATE_MASTER
config PORT06_INST02_DESIRADE_STATE_MASTER
bool "Master"
config PORT06_INST02_DESIRADE_STATE_SLAVE
bool "Slave"
config PORT06_INST02_DESIRADE_STATE_PASSIVE
bool "Passive"
endchoice
config PORT06_INST02_ASYMMETRY_CORRECTION_ENABLE
depends on !PORT06_INST02_PROFILE_HA && !PORT06_INST02_PROFILE_WR
bool "asymmetryCorrectionPortDS.enable"
default y
help
When supported, the value TRUE shall indicate that the mechanism of for the calculation
of the <delayAsymmetry> for certain media is enabled on the PTP port.
choice
prompt "BMCA mode"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
default PORT06_INST02_BMODE_MASTER_ONLY if TIME_GM || TIME_FM
default PORT06_INST02_BMODE_AUTO if TIME_BC
config PORT06_INST02_BMODE_MASTER_ONLY
bool "MasterOnly"
config PORT06_INST02_BMODE_AUTO
bool "Auto"
endchoice
config PORT06_INST02_EGRESS_LATENCY
int "timestampCorrectionPortDS.egressLatency (ps)"
default 224603
help
Defines the transmission constant delay (ps)
config PORT06_INST02_INGRESS_LATENCY
int "timestampCorrectionPortDS.ingressLatency (ps)"
default 227891
help
Defines the reception constant delay (ps)
config PORT06_INST02_ANNOUNCE_INTERVAL
int "logAnnounceInterval"
default 1
range 0 4
help
The mean time interval between transmissions of successive
Announce messages. The value is the logarithm to the base 2.
The configurable range shall be 0 to 4.
config PORT06_INST02_ANNOUNCE_RECEIPT_TIMEOUT
int "announceReceiptTimeout"
default 3
range 2 255
help
The announceReceiptTimeout specifies the number of announceIntervals
that must pass without receipt of an Announce message before the
occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 255
config PORT06_INST02_SYNC_INTERVAL
int "logSyncInterval"
default 0
range -1 1
help
The mean time interval between transmission of successive
Sync messages, i.e., the sync-interval, when transmitted
as multicast messages. The value is the logarithm to the base 2.
The configurable range shall be -1 to +1
config PORT06_INST02_MIN_DELAY_REQ_INTERVAL
depends on PORT06_INST02_MECHANISM_E2E
int "minDelayRequestInterval"
default 0
range 0 5
help
The minDelayRequestInterval specifies the minimum permitted
mean time interval between successive Delay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT06_INST02_MIN_PDELAY_REQ_INTERVAL
depends on PORT06_INST02_MECHANISM_P2P
int "minPDelayRequestInterval"
default 0
range 0 5 help
The minPDelayRequestInterval specifies the minimum permitted
mean time interval between successive Pdelay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT06_INST02_L1SYNC_ENABLED
depends on PORT06_INST02_PROFILE_CUSTOM
bool "L1SyncBasicPortDS.L1SyncEnabled"
default y
help
This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled
config PORT06_INST02_L1SYNC_INTERVAL
depends on PORT06_INST02_PROFILE_HA || (PORT06_INST02_PROFILE_CUSTOM && PORT06_INST02_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.logL1SyncInterval"
default 0
range -4 4
help
The L1Sync interval specifies the time interval
between successive periodic L1_SYNC TLV.
The value is the logarithm to the base 2.
The configurable range shall be -4 to 4
config PORT06_INST02_L1SYNC_RECEIPT_TIMEOUT
depends on PORT06_INST02_PROFILE_HA || (PORT06_INST02_PROFILE_CUSTOM && PORT06_INST02_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
default 3
range 2 10
help
The value of L1SyncReceiptTimeout specifies the number of elapsed
L1SyncIntervals that must pass without reception of the L1_SYNC TLV
before the L1_SYNC TLV reception timeout occurs.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 10
config PORT06_INST02_L1SYNC_TX_COHERENCY_IS_REQUIRED
depends on PORT06_INST02_PROFILE_CUSTOM && PORT06_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.txCoherencyIsRequired"
default y
help
The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a transmit coherent port.
config PORT06_INST02_L1SYNC_RX_COHERENCY_IS_REQUIRED
depends on PORT06_INST02_PROFILE_CUSTOM && PORT06_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
default y
help
The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a receive coherent port.
config PORT06_INST02_L1SYNC_CONGRUENCY_IS_REQUIRED
depends on PORT06_INST02_PROFILE_CUSTOM && PORT06_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.congruencyIsRequired"
default y
help
The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
be a congruent port
config PORT06_INST02_L1SYNC_OPT_PARAMS_ENABLED
depends on PORT06_INST02_PROFILE_CUSTOM && PORT06_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.optParamsEnabled"
default n
help
The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC TLV extends this TLV with the information about the optional parameters.
config PORT06_INST02_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
depends on PORT06_INST02_L1SYNC_OPT_PARAMS_ENABLED="y"
bool "L1SyncBasicPortDS.timestampsCorrectedTx"
default n
help
When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE,
the L1Sync port shall correct the transmitted egress timestamps with
the known value of the phase offset.
endmenu
endmenu
menu "PORT 7"
config PORT07_IFACE
string "Network interface"
default "wri7"
help
Used to set the physical port interface name: "wri[1-18]"
config PORT07_FIBER
int "Fiber type"
default 0
help
Used to set the type of fiber (number referring to the corresponding
FIBERXX_PARAMS)
config PORT07_CONSTANT_ASYMMETRY
int "asymmetryCorrectionPortDS.constantAsymmetry"
default 0
help
Used to set the constant delay asymmetry.
choice
prompt "Number of port instances"
default PORT07_INSTANCE_COUNT_1
config PORT07_INSTANCE_COUNT_0
bool "0"
config PORT07_INSTANCE_COUNT_1
bool "1"
config PORT07_INSTANCE_COUNT_2
bool "2"
endchoice
menu "Instance 1"
depends on PORT07_INSTANCE_COUNT_1 || PORT07_INSTANCE_COUNT_2
choice
prompt "Network protocol"
default PORT07_INST01_PROTOCOL_RAW
config PORT07_INST01_PROTOCOL_RAW
bool "IEEE 802.3"
config PORT07_INST01_PROTOCOL_UDP_IPV4
bool "UDP/Ipv4"
endchoice
choice
prompt "Delay mechanism"
default PORT07_INST01_MECHANISM_E2E
config PORT07_INST01_MECHANISM_E2E
bool "End-to-end"
config PORT07_INST01_MECHANISM_P2P
bool "Peer-to-peer"
endchoice
config PORT07_INST01_MONITOR
bool "SNMP monitoring" default y
help
Option to disable or enable triggering errors in SNMP on a port
choice
prompt "Profile"
default PORT07_INST01_PROFILE_WR
config PORT07_INST01_PROFILE_PTP
bool "PTP"
config PORT07_INST01_PROFILE_WR
bool "White Rabbit"
config PORT07_INST01_PROFILE_CUSTOM
bool "Custom"
endchoice
choice
prompt "Desired state"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
default PORT07_INST01_DESIRADE_STATE_MASTER
config PORT07_INST01_DESIRADE_STATE_MASTER
bool "Master"
config PORT07_INST01_DESIRADE_STATE_SLAVE
bool "Slave"
config PORT07_INST01_DESIRADE_STATE_PASSIVE
bool "Passive"
endchoice
config PORT07_INST01_ASYMMETRY_CORRECTION_ENABLE
depends on !PORT07_INST01_PROFILE_HA && !PORT07_INST01_PROFILE_WR
bool "asymmetryCorrectionPortDS.enable"
default y
help
When supported, the value TRUE shall indicate that the mechanism of for the calculation
of the <delayAsymmetry> for certain media is enabled on the PTP port.
choice
prompt "BMCA mode"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
default PORT07_INST01_BMODE_MASTER_ONLY if TIME_GM || TIME_FM
default PORT07_INST01_BMODE_AUTO if TIME_BC
config PORT07_INST01_BMODE_MASTER_ONLY
bool "MasterOnly"
config PORT07_INST01_BMODE_AUTO
bool "Auto"
endchoice
config PORT07_INST01_EGRESS_LATENCY
int "timestampCorrectionPortDS.egressLatency (ps)"
default 224761
help
Defines the transmission constant delay (ps)
config PORT07_INST01_INGRESS_LATENCY
int "timestampCorrectionPortDS.ingressLatency (ps)"
default 228055
help
Defines the reception constant delay (ps)
config PORT07_INST01_ANNOUNCE_INTERVAL
int "logAnnounceInterval"
default 1
range 0 4
help
The mean time interval between transmissions of successive
Announce messages. The value is the logarithm to the base 2.
The configurable range shall be 0 to 4.
config PORT07_INST01_ANNOUNCE_RECEIPT_TIMEOUT
int "announceReceiptTimeout"
default 3 range 2 255
help
The announceReceiptTimeout specifies the number of announceIntervals
that must pass without receipt of an Announce message before the
occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 255
config PORT07_INST01_SYNC_INTERVAL
int "logSyncInterval"
default 0
range -1 1
help
The mean time interval between transmission of successive
Sync messages, i.e., the sync-interval, when transmitted
as multicast messages. The value is the logarithm to the base 2.
The configurable range shall be -1 to +1
config PORT07_INST01_MIN_DELAY_REQ_INTERVAL
depends on PORT07_INST01_MECHANISM_E2E
int "minDelayRequestInterval"
default 0
range 0 5
help
The minDelayRequestInterval specifies the minimum permitted
mean time interval between successive Delay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT07_INST01_MIN_PDELAY_REQ_INTERVAL
depends on PORT07_INST01_MECHANISM_P2P
int "minPDelayRequestInterval"
default 0
range 0 5
help
The minPDelayRequestInterval specifies the minimum permitted
mean time interval between successive Pdelay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT07_INST01_L1SYNC_ENABLED
depends on PORT07_INST01_PROFILE_CUSTOM
bool "L1SyncBasicPortDS.L1SyncEnabled"
default y
help
This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled
config PORT07_INST01_L1SYNC_INTERVAL
depends on PORT07_INST01_PROFILE_HA || (PORT07_INST01_PROFILE_CUSTOM && PORT07_INST01_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.logL1SyncInterval"
default 0
range -4 4
help
The L1Sync interval specifies the time interval
between successive periodic L1_SYNC TLV.
The value is the logarithm to the base 2.
The configurable range shall be -4 to 4
config PORT07_INST01_L1SYNC_RECEIPT_TIMEOUT
depends on PORT07_INST01_PROFILE_HA || (PORT07_INST01_PROFILE_CUSTOM && PORT07_INST01_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
default 3
range 2 10
help
The value of L1SyncReceiptTimeout specifies the number of elapsed
L1SyncIntervals that must pass without reception of the L1_SYNC TLV
before the L1_SYNC TLV reception timeout occurs.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 10
config PORT07_INST01_L1SYNC_TX_COHERENCY_IS_REQUIRED
depends on PORT07_INST01_PROFILE_CUSTOM && PORT07_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.txCoherencyIsRequired"
default y
help
The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a transmit coherent port.
config PORT07_INST01_L1SYNC_RX_COHERENCY_IS_REQUIRED
depends on PORT07_INST01_PROFILE_CUSTOM && PORT07_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
default y
help
The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a receive coherent port.
config PORT07_INST01_L1SYNC_CONGRUENCY_IS_REQUIRED
depends on PORT07_INST01_PROFILE_CUSTOM && PORT07_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.congruencyIsRequired"
default y
help
The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
be a congruent port
config PORT07_INST01_L1SYNC_OPT_PARAMS_ENABLED
depends on PORT07_INST01_PROFILE_CUSTOM && PORT07_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.optParamsEnabled"
default n
help
The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
TLV extends this TLV with the information about the optional parameters.
config PORT07_INST01_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
depends on PORT07_INST01_L1SYNC_OPT_PARAMS_ENABLED="y"
bool "L1SyncBasicPortDS.timestampsCorrectedTx"
default n
help
When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE,
the L1Sync port shall correct the transmitted egress timestamps with
the known value of the phase offset.
endmenu
menu "Instance 2"
depends on PORT07_INSTANCE_COUNT_2
choice
prompt "Network protocol"
default PORT07_INST02_PROTOCOL_RAW
config PORT07_INST02_PROTOCOL_RAW
bool "IEEE 802.3"
config PORT07_INST02_PROTOCOL_UDP_IPV4
bool "UDP/Ipv4"
endchoice
choice
prompt "Delay mechanism"
default PORT07_INST02_MECHANISM_E2E
config PORT07_INST02_MECHANISM_E2E
bool "End-to-end"
config PORT07_INST02_MECHANISM_P2P
bool "Peer-to-peer"
endchoice
config PORT07_INST02_MONITOR
bool "SNMP monitoring" default y
help
Option to disable or enable triggering errors in SNMP on a port
choice
prompt "Profile"
default PORT07_INST02_PROFILE_WR
config PORT07_INST02_PROFILE_PTP
bool "PTP"
config PORT07_INST02_PROFILE_WR
bool "White Rabbit"
config PORT07_INST02_PROFILE_CUSTOM
bool "Custom"
endchoice
choice
prompt "Desired state"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
default PORT07_INST02_DESIRADE_STATE_MASTER
config PORT07_INST02_DESIRADE_STATE_MASTER
bool "Master"
config PORT07_INST02_DESIRADE_STATE_SLAVE
bool "Slave"
config PORT07_INST02_DESIRADE_STATE_PASSIVE
bool "Passive"
endchoice
config PORT07_INST02_ASYMMETRY_CORRECTION_ENABLE
depends on !PORT07_INST02_PROFILE_HA && !PORT07_INST02_PROFILE_WR
bool "asymmetryCorrectionPortDS.enable"
default y
help
When supported, the value TRUE shall indicate that the mechanism of for the calculation
of the <delayAsymmetry> for certain media is enabled on the PTP port.
choice
prompt "BMCA mode"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
default PORT07_INST02_BMODE_MASTER_ONLY if TIME_GM || TIME_FM
default PORT07_INST02_BMODE_AUTO if TIME_BC
config PORT07_INST02_BMODE_MASTER_ONLY
bool "MasterOnly"
config PORT07_INST02_BMODE_AUTO
bool "Auto"
endchoice
config PORT07_INST02_EGRESS_LATENCY
int "timestampCorrectionPortDS.egressLatency (ps)"
default 224761
help
Defines the transmission constant delay (ps)
config PORT07_INST02_INGRESS_LATENCY
int "timestampCorrectionPortDS.ingressLatency (ps)"
default 228055
help
Defines the reception constant delay (ps)
config PORT07_INST02_ANNOUNCE_INTERVAL
int "logAnnounceInterval"
default 1
range 0 4
help
The mean time interval between transmissions of successive
Announce messages. The value is the logarithm to the base 2.
The configurable range shall be 0 to 4.
config PORT07_INST02_ANNOUNCE_RECEIPT_TIMEOUT
int "announceReceiptTimeout"
default 3 range 2 255
help
The announceReceiptTimeout specifies the number of announceIntervals
that must pass without receipt of an Announce message before the
occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 255
config PORT07_INST02_SYNC_INTERVAL
int "logSyncInterval"
default 0
range -1 1
help
The mean time interval between transmission of successive
Sync messages, i.e., the sync-interval, when transmitted
as multicast messages. The value is the logarithm to the base 2.
The configurable range shall be -1 to +1
config PORT07_INST02_MIN_DELAY_REQ_INTERVAL
depends on PORT07_INST02_MECHANISM_E2E
int "minDelayRequestInterval"
default 0
range 0 5
help
The minDelayRequestInterval specifies the minimum permitted
mean time interval between successive Delay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT07_INST02_MIN_PDELAY_REQ_INTERVAL
depends on PORT07_INST02_MECHANISM_P2P
int "minPDelayRequestInterval"
default 0
range 0 5
help
The minPDelayRequestInterval specifies the minimum permitted
mean time interval between successive Pdelay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT07_INST02_L1SYNC_ENABLED
depends on PORT07_INST02_PROFILE_CUSTOM
bool "L1SyncBasicPortDS.L1SyncEnabled"
default y
help
This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled
config PORT07_INST02_L1SYNC_INTERVAL
depends on PORT07_INST02_PROFILE_HA || (PORT07_INST02_PROFILE_CUSTOM && PORT07_INST02_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.logL1SyncInterval"
default 0
range -4 4
help
The L1Sync interval specifies the time interval
between successive periodic L1_SYNC TLV.
The value is the logarithm to the base 2.
The configurable range shall be -4 to 4
config PORT07_INST02_L1SYNC_RECEIPT_TIMEOUT
depends on PORT07_INST02_PROFILE_HA || (PORT07_INST02_PROFILE_CUSTOM && PORT07_INST02_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
default 3
range 2 10
help
The value of L1SyncReceiptTimeout specifies the number of elapsed
L1SyncIntervals that must pass without reception of the L1_SYNC TLV
before the L1_SYNC TLV reception timeout occurs.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 10
config PORT07_INST02_L1SYNC_TX_COHERENCY_IS_REQUIRED
depends on PORT07_INST02_PROFILE_CUSTOM && PORT07_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.txCoherencyIsRequired"
default y
help
The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a transmit coherent port.
config PORT07_INST02_L1SYNC_RX_COHERENCY_IS_REQUIRED
depends on PORT07_INST02_PROFILE_CUSTOM && PORT07_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
default y
help
The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a receive coherent port.
config PORT07_INST02_L1SYNC_CONGRUENCY_IS_REQUIRED
depends on PORT07_INST02_PROFILE_CUSTOM && PORT07_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.congruencyIsRequired"
default y
help
The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
be a congruent port
config PORT07_INST02_L1SYNC_OPT_PARAMS_ENABLED
depends on PORT07_INST02_PROFILE_CUSTOM && PORT07_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.optParamsEnabled"
default n
help
The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
TLV extends this TLV with the information about the optional parameters.
config PORT07_INST02_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
depends on PORT07_INST02_L1SYNC_OPT_PARAMS_ENABLED="y"
bool "L1SyncBasicPortDS.timestampsCorrectedTx"
default n
help
When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE,
the L1Sync port shall correct the transmitted egress timestamps with
the known value of the phase offset.
endmenu
endmenu
menu "PORT 8"
config PORT08_IFACE
string "Network interface"
default "wri8"
help
Used to set the physical port interface name: "wri[1-18]"
config PORT08_FIBER
int "Fiber type"
default 0
help
Used to set the type of fiber (number referring to the corresponding
FIBERXX_PARAMS)
config PORT08_CONSTANT_ASYMMETRY
int "asymmetryCorrectionPortDS.constantAsymmetry"
default 0
help
Used to set the constant delay asymmetry.
choice
prompt "Number of port instances"
default PORT08_INSTANCE_COUNT_1
config PORT08_INSTANCE_COUNT_0
bool "0"
config PORT08_INSTANCE_COUNT_1
bool "1"
config PORT08_INSTANCE_COUNT_2
bool "2"
endchoice
menu "Instance 1"
depends on PORT08_INSTANCE_COUNT_1 || PORT08_INSTANCE_COUNT_2
choice
prompt "Network protocol"
default PORT08_INST01_PROTOCOL_RAW
config PORT08_INST01_PROTOCOL_RAW
bool "IEEE 802.3"
config PORT08_INST01_PROTOCOL_UDP_IPV4
bool "UDP/Ipv4"
endchoice
choice
prompt "Delay mechanism"
default PORT08_INST01_MECHANISM_E2E
config PORT08_INST01_MECHANISM_E2E
bool "End-to-end"
config PORT08_INST01_MECHANISM_P2P
bool "Peer-to-peer"
endchoice
config PORT08_INST01_MONITOR
bool "SNMP monitoring"
default y
help
Option to disable or enable triggering errors in SNMP on a port
choice
prompt "Profile"
default PORT08_INST01_PROFILE_WR
config PORT08_INST01_PROFILE_PTP
bool "PTP"
config PORT08_INST01_PROFILE_WR
bool "White Rabbit"
config PORT08_INST01_PROFILE_CUSTOM
bool "Custom"
endchoice
choice
prompt "Desired state"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
default PORT08_INST01_DESIRADE_STATE_MASTER
config PORT08_INST01_DESIRADE_STATE_MASTER
bool "Master"
config PORT08_INST01_DESIRADE_STATE_SLAVE
bool "Slave"
config PORT08_INST01_DESIRADE_STATE_PASSIVE
bool "Passive"
endchoice
config PORT08_INST01_ASYMMETRY_CORRECTION_ENABLE
depends on !PORT08_INST01_PROFILE_HA && !PORT08_INST01_PROFILE_WR
bool "asymmetryCorrectionPortDS.enable"
default y
help
When supported, the value TRUE shall indicate that the mechanism of for the calculation
of the <delayAsymmetry> for certain media is enabled on the PTP port.
choice prompt "BMCA mode"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
default PORT08_INST01_BMODE_MASTER_ONLY if TIME_GM || TIME_FM
default PORT08_INST01_BMODE_AUTO if TIME_BC
config PORT08_INST01_BMODE_MASTER_ONLY
bool "MasterOnly"
config PORT08_INST01_BMODE_AUTO
bool "Auto"
endchoice
config PORT08_INST01_EGRESS_LATENCY
int "timestampCorrectionPortDS.egressLatency (ps)"
default 224898
help
Defines the transmission constant delay (ps)
config PORT08_INST01_INGRESS_LATENCY
int "timestampCorrectionPortDS.ingressLatency (ps)"
default 228178
help
Defines the reception constant delay (ps)
config PORT08_INST01_ANNOUNCE_INTERVAL
int "logAnnounceInterval"
default 1
range 0 4
help
The mean time interval between transmissions of successive
Announce messages. The value is the logarithm to the base 2.
The configurable range shall be 0 to 4.
config PORT08_INST01_ANNOUNCE_RECEIPT_TIMEOUT
int "announceReceiptTimeout"
default 3
range 2 255
help
The announceReceiptTimeout specifies the number of announceIntervals
that must pass without receipt of an Announce message before the
occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 255
config PORT08_INST01_SYNC_INTERVAL
int "logSyncInterval"
default 0
range -1 1
help
The mean time interval between transmission of successive
Sync messages, i.e., the sync-interval, when transmitted
as multicast messages. The value is the logarithm to the base 2.
The configurable range shall be -1 to +1
config PORT08_INST01_MIN_DELAY_REQ_INTERVAL
depends on PORT08_INST01_MECHANISM_E2E
int "minDelayRequestInterval"
default 0
range 0 5
help
The minDelayRequestInterval specifies the minimum permitted
mean time interval between successive Delay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT08_INST01_MIN_PDELAY_REQ_INTERVAL
depends on PORT08_INST01_MECHANISM_P2P
int "minPDelayRequestInterval"
default 0
range 0 5
help
The minPDelayRequestInterval specifies the minimum permitted mean time interval between successive Pdelay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT08_INST01_L1SYNC_ENABLED
depends on PORT08_INST01_PROFILE_CUSTOM
bool "L1SyncBasicPortDS.L1SyncEnabled"
default y
help
This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled
config PORT08_INST01_L1SYNC_INTERVAL
depends on PORT08_INST01_PROFILE_HA || (PORT08_INST01_PROFILE_CUSTOM && PORT08_INST01_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.logL1SyncInterval"
default 0
range -4 4
help
The L1Sync interval specifies the time interval
between successive periodic L1_SYNC TLV.
The value is the logarithm to the base 2.
The configurable range shall be -4 to 4
config PORT08_INST01_L1SYNC_RECEIPT_TIMEOUT
depends on PORT08_INST01_PROFILE_HA || (PORT08_INST01_PROFILE_CUSTOM && PORT08_INST01_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
default 3
range 2 10
help
The value of L1SyncReceiptTimeout specifies the number of elapsed
L1SyncIntervals that must pass without reception of the L1_SYNC TLV
before the L1_SYNC TLV reception timeout occurs.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 10
config PORT08_INST01_L1SYNC_TX_COHERENCY_IS_REQUIRED
depends on PORT08_INST01_PROFILE_CUSTOM && PORT08_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.txCoherencyIsRequired"
default y
help
The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a transmit coherent port.
config PORT08_INST01_L1SYNC_RX_COHERENCY_IS_REQUIRED
depends on PORT08_INST01_PROFILE_CUSTOM && PORT08_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
default y
help
The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a receive coherent port.
config PORT08_INST01_L1SYNC_CONGRUENCY_IS_REQUIRED
depends on PORT08_INST01_PROFILE_CUSTOM && PORT08_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.congruencyIsRequired"
default y
help
The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
be a congruent port
config PORT08_INST01_L1SYNC_OPT_PARAMS_ENABLED
depends on PORT08_INST01_PROFILE_CUSTOM && PORT08_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.optParamsEnabled"
default n
help
The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
TLV extends this TLV with the information about the optional parameters.
config PORT08_INST01_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
depends on PORT08_INST01_L1SYNC_OPT_PARAMS_ENABLED="y"
bool "L1SyncBasicPortDS.timestampsCorrectedTx"
default n
help
When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE,
the L1Sync port shall correct the transmitted egress timestamps with
the known value of the phase offset.
endmenu
menu "Instance 2"
depends on PORT08_INSTANCE_COUNT_2
choice
prompt "Network protocol"
default PORT08_INST02_PROTOCOL_RAW
config PORT08_INST02_PROTOCOL_RAW
bool "IEEE 802.3"
config PORT08_INST02_PROTOCOL_UDP_IPV4
bool "UDP/Ipv4"
endchoice
choice
prompt "Delay mechanism"
default PORT08_INST02_MECHANISM_E2E
config PORT08_INST02_MECHANISM_E2E
bool "End-to-end"
config PORT08_INST02_MECHANISM_P2P
bool "Peer-to-peer"
endchoice
config PORT08_INST02_MONITOR
bool "SNMP monitoring"
default y
help
Option to disable or enable triggering errors in SNMP on a port
choice
prompt "Profile"
default PORT08_INST02_PROFILE_WR
config PORT08_INST02_PROFILE_PTP
bool "PTP"
config PORT08_INST02_PROFILE_WR
bool "White Rabbit"
config PORT08_INST02_PROFILE_CUSTOM
bool "Custom"
endchoice
choice
prompt "Desired state"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
default PORT08_INST02_DESIRADE_STATE_MASTER
config PORT08_INST02_DESIRADE_STATE_MASTER
bool "Master"
config PORT08_INST02_DESIRADE_STATE_SLAVE
bool "Slave"
config PORT08_INST02_DESIRADE_STATE_PASSIVE
bool "Passive"
endchoice
config PORT08_INST02_ASYMMETRY_CORRECTION_ENABLE
depends on !PORT08_INST02_PROFILE_HA && !PORT08_INST02_PROFILE_WR
bool "asymmetryCorrectionPortDS.enable"
default y
help
When supported, the value TRUE shall indicate that the mechanism of for the calculation
of the <delayAsymmetry> for certain media is enabled on the PTP port.
choice prompt "BMCA mode"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
default PORT08_INST02_BMODE_MASTER_ONLY if TIME_GM || TIME_FM
default PORT08_INST02_BMODE_AUTO if TIME_BC
config PORT08_INST02_BMODE_MASTER_ONLY
bool "MasterOnly"
config PORT08_INST02_BMODE_AUTO
bool "Auto"
endchoice
config PORT08_INST02_EGRESS_LATENCY
int "timestampCorrectionPortDS.egressLatency (ps)"
default 224898
help
Defines the transmission constant delay (ps)
config PORT08_INST02_INGRESS_LATENCY
int "timestampCorrectionPortDS.ingressLatency (ps)"
default 228178
help
Defines the reception constant delay (ps)
config PORT08_INST02_ANNOUNCE_INTERVAL
int "logAnnounceInterval"
default 1
range 0 4
help
The mean time interval between transmissions of successive
Announce messages. The value is the logarithm to the base 2.
The configurable range shall be 0 to 4.
config PORT08_INST02_ANNOUNCE_RECEIPT_TIMEOUT
int "announceReceiptTimeout"
default 3
range 2 255
help
The announceReceiptTimeout specifies the number of announceIntervals
that must pass without receipt of an Announce message before the
occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 255
config PORT08_INST02_SYNC_INTERVAL
int "logSyncInterval"
default 0
range -1 1
help
The mean time interval between transmission of successive
Sync messages, i.e., the sync-interval, when transmitted
as multicast messages. The value is the logarithm to the base 2.
The configurable range shall be -1 to +1
config PORT08_INST02_MIN_DELAY_REQ_INTERVAL
depends on PORT08_INST02_MECHANISM_E2E
int "minDelayRequestInterval"
default 0
range 0 5
help
The minDelayRequestInterval specifies the minimum permitted
mean time interval between successive Delay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT08_INST02_MIN_PDELAY_REQ_INTERVAL
depends on PORT08_INST02_MECHANISM_P2P
int "minPDelayRequestInterval"
default 0
range 0 5
help
The minPDelayRequestInterval specifies the minimum permitted mean time interval between successive Pdelay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT08_INST02_L1SYNC_ENABLED
depends on PORT08_INST02_PROFILE_CUSTOM
bool "L1SyncBasicPortDS.L1SyncEnabled"
default y
help
This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled
config PORT08_INST02_L1SYNC_INTERVAL
depends on PORT08_INST02_PROFILE_HA || (PORT08_INST02_PROFILE_CUSTOM && PORT08_INST02_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.logL1SyncInterval"
default 0
range -4 4
help
The L1Sync interval specifies the time interval
between successive periodic L1_SYNC TLV.
The value is the logarithm to the base 2.
The configurable range shall be -4 to 4
config PORT08_INST02_L1SYNC_RECEIPT_TIMEOUT
depends on PORT08_INST02_PROFILE_HA || (PORT08_INST02_PROFILE_CUSTOM && PORT08_INST02_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
default 3
range 2 10
help
The value of L1SyncReceiptTimeout specifies the number of elapsed
L1SyncIntervals that must pass without reception of the L1_SYNC TLV
before the L1_SYNC TLV reception timeout occurs.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 10
config PORT08_INST02_L1SYNC_TX_COHERENCY_IS_REQUIRED
depends on PORT08_INST02_PROFILE_CUSTOM && PORT08_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.txCoherencyIsRequired"
default y
help
The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a transmit coherent port.
config PORT08_INST02_L1SYNC_RX_COHERENCY_IS_REQUIRED
depends on PORT08_INST02_PROFILE_CUSTOM && PORT08_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
default y
help
The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a receive coherent port.
config PORT08_INST02_L1SYNC_CONGRUENCY_IS_REQUIRED
depends on PORT08_INST02_PROFILE_CUSTOM && PORT08_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.congruencyIsRequired"
default y
help
The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
be a congruent port
config PORT08_INST02_L1SYNC_OPT_PARAMS_ENABLED
depends on PORT08_INST02_PROFILE_CUSTOM && PORT08_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.optParamsEnabled"
default n
help
The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
TLV extends this TLV with the information about the optional parameters.
config PORT08_INST02_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
depends on PORT08_INST02_L1SYNC_OPT_PARAMS_ENABLED="y"
bool "L1SyncBasicPortDS.timestampsCorrectedTx"
default n
help
When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE,
the L1Sync port shall correct the transmitted egress timestamps with
the known value of the phase offset.
endmenu
endmenu
menu "PORT 9"
config PORT09_IFACE
string "Network interface"
default "wri9"
help
Used to set the physical port interface name: "wri[1-18]"
config PORT09_FIBER
int "Fiber type"
default 0
help
Used to set the type of fiber (number referring to the corresponding
FIBERXX_PARAMS)
config PORT09_CONSTANT_ASYMMETRY
int "asymmetryCorrectionPortDS.constantAsymmetry"
default 0
help
Used to set the constant delay asymmetry.
choice
prompt "Number of port instances"
default PORT09_INSTANCE_COUNT_1
config PORT09_INSTANCE_COUNT_0
bool "0"
config PORT09_INSTANCE_COUNT_1
bool "1"
config PORT09_INSTANCE_COUNT_2
bool "2"
endchoice
menu "Instance 1"
depends on PORT09_INSTANCE_COUNT_1 || PORT09_INSTANCE_COUNT_2
choice
prompt "Network protocol"
default PORT09_INST01_PROTOCOL_RAW
config PORT09_INST01_PROTOCOL_RAW
bool "IEEE 802.3"
config PORT09_INST01_PROTOCOL_UDP_IPV4
bool "UDP/Ipv4"
endchoice
choice
prompt "Delay mechanism"
default PORT09_INST01_MECHANISM_E2E
config PORT09_INST01_MECHANISM_E2E
bool "End-to-end"
config PORT09_INST01_MECHANISM_P2P
bool "Peer-to-peer"
endchoice
config PORT09_INST01_MONITOR
bool "SNMP monitoring"
default y
help Option to disable or enable triggering errors in SNMP on a port
choice
prompt "Profile"
default PORT09_INST01_PROFILE_WR
config PORT09_INST01_PROFILE_PTP
bool "PTP"
config PORT09_INST01_PROFILE_WR
bool "White Rabbit"
config PORT09_INST01_PROFILE_CUSTOM
bool "Custom"
endchoice
choice
prompt "Desired state"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
default PORT09_INST01_DESIRADE_STATE_MASTER
config PORT09_INST01_DESIRADE_STATE_MASTER
bool "Master"
config PORT09_INST01_DESIRADE_STATE_SLAVE
bool "Slave"
config PORT09_INST01_DESIRADE_STATE_PASSIVE
bool "Passive"
endchoice
config PORT09_INST01_ASYMMETRY_CORRECTION_ENABLE
depends on !PORT09_INST01_PROFILE_HA && !PORT09_INST01_PROFILE_WR
bool "asymmetryCorrectionPortDS.enable"
default y
help
When supported, the value TRUE shall indicate that the mechanism of for the calculation
of the <delayAsymmetry> for certain media is enabled on the PTP port.
choice
prompt "BMCA mode"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
default PORT09_INST01_BMODE_MASTER_ONLY if TIME_GM || TIME_FM
default PORT09_INST01_BMODE_AUTO if TIME_BC
config PORT09_INST01_BMODE_MASTER_ONLY
bool "MasterOnly"
config PORT09_INST01_BMODE_AUTO
bool "Auto"
endchoice
config PORT09_INST01_EGRESS_LATENCY
int "timestampCorrectionPortDS.egressLatency (ps)"
default 225069
help
Defines the transmission constant delay (ps)
config PORT09_INST01_INGRESS_LATENCY
int "timestampCorrectionPortDS.ingressLatency (ps)"
default 228277
help
Defines the reception constant delay (ps)
config PORT09_INST01_ANNOUNCE_INTERVAL
int "logAnnounceInterval"
default 1
range 0 4
help
The mean time interval between transmissions of successive
Announce messages. The value is the logarithm to the base 2.
The configurable range shall be 0 to 4.
config PORT09_INST01_ANNOUNCE_RECEIPT_TIMEOUT
int "announceReceiptTimeout"
default 3
range 2 255
help The announceReceiptTimeout specifies the number of announceIntervals
that must pass without receipt of an Announce message before the
occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 255
config PORT09_INST01_SYNC_INTERVAL
int "logSyncInterval"
default 0
range -1 1
help
The mean time interval between transmission of successive
Sync messages, i.e., the sync-interval, when transmitted
as multicast messages. The value is the logarithm to the base 2.
The configurable range shall be -1 to +1
config PORT09_INST01_MIN_DELAY_REQ_INTERVAL
depends on PORT09_INST01_MECHANISM_E2E
int "minDelayRequestInterval"
default 0
range 0 5
help
The minDelayRequestInterval specifies the minimum permitted
mean time interval between successive Delay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT09_INST01_MIN_PDELAY_REQ_INTERVAL
depends on PORT09_INST01_MECHANISM_P2P
int "minPDelayRequestInterval"
default 0
range 0 5
help
The minPDelayRequestInterval specifies the minimum permitted
mean time interval between successive Pdelay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT09_INST01_L1SYNC_ENABLED
depends on PORT09_INST01_PROFILE_CUSTOM
bool "L1SyncBasicPortDS.L1SyncEnabled"
default y
help
This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled
config PORT09_INST01_L1SYNC_INTERVAL
depends on PORT09_INST01_PROFILE_HA || (PORT09_INST01_PROFILE_CUSTOM && PORT09_INST01_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.logL1SyncInterval"
default 0
range -4 4
help
The L1Sync interval specifies the time interval
between successive periodic L1_SYNC TLV.
The value is the logarithm to the base 2.
The configurable range shall be -4 to 4
config PORT09_INST01_L1SYNC_RECEIPT_TIMEOUT
depends on PORT09_INST01_PROFILE_HA || (PORT09_INST01_PROFILE_CUSTOM && PORT09_INST01_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
default 3
range 2 10
help
The value of L1SyncReceiptTimeout specifies the number of elapsed
L1SyncIntervals that must pass without reception of the L1_SYNC TLV
before the L1_SYNC TLV reception timeout occurs.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 10
config PORT09_INST01_L1SYNC_TX_COHERENCY_IS_REQUIRED depends on PORT09_INST01_PROFILE_CUSTOM && PORT09_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.txCoherencyIsRequired"
default y
help
The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a transmit coherent port.
config PORT09_INST01_L1SYNC_RX_COHERENCY_IS_REQUIRED
depends on PORT09_INST01_PROFILE_CUSTOM && PORT09_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
default y
help
The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a receive coherent port.
config PORT09_INST01_L1SYNC_CONGRUENCY_IS_REQUIRED
depends on PORT09_INST01_PROFILE_CUSTOM && PORT09_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.congruencyIsRequired"
default y
help
The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
be a congruent port
config PORT09_INST01_L1SYNC_OPT_PARAMS_ENABLED
depends on PORT09_INST01_PROFILE_CUSTOM && PORT09_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.optParamsEnabled"
default n
help
The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
TLV extends this TLV with the information about the optional parameters.
config PORT09_INST01_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
depends on PORT09_INST01_L1SYNC_OPT_PARAMS_ENABLED="y"
bool "L1SyncBasicPortDS.timestampsCorrectedTx"
default n
help
When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE,
the L1Sync port shall correct the transmitted egress timestamps with
the known value of the phase offset.
endmenu
menu "Instance 2"
depends on PORT09_INSTANCE_COUNT_2
choice
prompt "Network protocol"
default PORT09_INST02_PROTOCOL_RAW
config PORT09_INST02_PROTOCOL_RAW
bool "IEEE 802.3"
config PORT09_INST02_PROTOCOL_UDP_IPV4
bool "UDP/Ipv4"
endchoice
choice
prompt "Delay mechanism"
default PORT09_INST02_MECHANISM_E2E
config PORT09_INST02_MECHANISM_E2E
bool "End-to-end"
config PORT09_INST02_MECHANISM_P2P
bool "Peer-to-peer"
endchoice
config PORT09_INST02_MONITOR
bool "SNMP monitoring"
default y
help Option to disable or enable triggering errors in SNMP on a port
choice
prompt "Profile"
default PORT09_INST02_PROFILE_WR
config PORT09_INST02_PROFILE_PTP
bool "PTP"
config PORT09_INST02_PROFILE_WR
bool "White Rabbit"
config PORT09_INST02_PROFILE_CUSTOM
bool "Custom"
endchoice
choice
prompt "Desired state"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
default PORT09_INST02_DESIRADE_STATE_MASTER
config PORT09_INST02_DESIRADE_STATE_MASTER
bool "Master"
config PORT09_INST02_DESIRADE_STATE_SLAVE
bool "Slave"
config PORT09_INST02_DESIRADE_STATE_PASSIVE
bool "Passive"
endchoice
config PORT09_INST02_ASYMMETRY_CORRECTION_ENABLE
depends on !PORT09_INST02_PROFILE_HA && !PORT09_INST02_PROFILE_WR
bool "asymmetryCorrectionPortDS.enable"
default y
help
When supported, the value TRUE shall indicate that the mechanism of for the calculation
of the <delayAsymmetry> for certain media is enabled on the PTP port.
choice
prompt "BMCA mode"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
default PORT09_INST02_BMODE_MASTER_ONLY if TIME_GM || TIME_FM
default PORT09_INST02_BMODE_AUTO if TIME_BC
config PORT09_INST02_BMODE_MASTER_ONLY
bool "MasterOnly"
config PORT09_INST02_BMODE_AUTO
bool "Auto"
endchoice
config PORT09_INST02_EGRESS_LATENCY
int "timestampCorrectionPortDS.egressLatency (ps)"
default 225069
help
Defines the transmission constant delay (ps)
config PORT09_INST02_INGRESS_LATENCY
int "timestampCorrectionPortDS.ingressLatency (ps)"
default 228277
help
Defines the reception constant delay (ps)
config PORT09_INST02_ANNOUNCE_INTERVAL
int "logAnnounceInterval"
default 1
range 0 4
help
The mean time interval between transmissions of successive
Announce messages. The value is the logarithm to the base 2.
The configurable range shall be 0 to 4.
config PORT09_INST02_ANNOUNCE_RECEIPT_TIMEOUT
int "announceReceiptTimeout"
default 3
range 2 255
help The announceReceiptTimeout specifies the number of announceIntervals
that must pass without receipt of an Announce message before the
occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 255
config PORT09_INST02_SYNC_INTERVAL
int "logSyncInterval"
default 0
range -1 1
help
The mean time interval between transmission of successive
Sync messages, i.e., the sync-interval, when transmitted
as multicast messages. The value is the logarithm to the base 2.
The configurable range shall be -1 to +1
config PORT09_INST02_MIN_DELAY_REQ_INTERVAL
depends on PORT09_INST02_MECHANISM_E2E
int "minDelayRequestInterval"
default 0
range 0 5
help
The minDelayRequestInterval specifies the minimum permitted
mean time interval between successive Delay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT09_INST02_MIN_PDELAY_REQ_INTERVAL
depends on PORT09_INST02_MECHANISM_P2P
int "minPDelayRequestInterval"
default 0
range 0 5
help
The minPDelayRequestInterval specifies the minimum permitted
mean time interval between successive Pdelay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT09_INST02_L1SYNC_ENABLED
depends on PORT09_INST02_PROFILE_CUSTOM
bool "L1SyncBasicPortDS.L1SyncEnabled"
default y
help
This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled
config PORT09_INST02_L1SYNC_INTERVAL
depends on PORT09_INST02_PROFILE_HA || (PORT09_INST02_PROFILE_CUSTOM && PORT09_INST02_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.logL1SyncInterval"
default 0
range -4 4
help
The L1Sync interval specifies the time interval
between successive periodic L1_SYNC TLV.
The value is the logarithm to the base 2.
The configurable range shall be -4 to 4
config PORT09_INST02_L1SYNC_RECEIPT_TIMEOUT
depends on PORT09_INST02_PROFILE_HA || (PORT09_INST02_PROFILE_CUSTOM && PORT09_INST02_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
default 3
range 2 10
help
The value of L1SyncReceiptTimeout specifies the number of elapsed
L1SyncIntervals that must pass without reception of the L1_SYNC TLV
before the L1_SYNC TLV reception timeout occurs.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 10
config PORT09_INST02_L1SYNC_TX_COHERENCY_IS_REQUIRED depends on PORT09_INST02_PROFILE_CUSTOM && PORT09_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.txCoherencyIsRequired"
default y
help
The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a transmit coherent port.
config PORT09_INST02_L1SYNC_RX_COHERENCY_IS_REQUIRED
depends on PORT09_INST02_PROFILE_CUSTOM && PORT09_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
default y
help
The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a receive coherent port.
config PORT09_INST02_L1SYNC_CONGRUENCY_IS_REQUIRED
depends on PORT09_INST02_PROFILE_CUSTOM && PORT09_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.congruencyIsRequired"
default y
help
The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
be a congruent port
config PORT09_INST02_L1SYNC_OPT_PARAMS_ENABLED
depends on PORT09_INST02_PROFILE_CUSTOM && PORT09_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.optParamsEnabled"
default n
help
The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
TLV extends this TLV with the information about the optional parameters.
config PORT09_INST02_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
depends on PORT09_INST02_L1SYNC_OPT_PARAMS_ENABLED="y"
bool "L1SyncBasicPortDS.timestampsCorrectedTx"
default n
help
When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE,
the L1Sync port shall correct the transmitted egress timestamps with
the known value of the phase offset.
endmenu
endmenu
menu "PORT 10"
config PORT10_IFACE
string "Network interface"
default "wri10"
help
Used to set the physical port interface name: "wri[1-18]"
config PORT10_FIBER
int "Fiber type"
default 0
help
Used to set the type of fiber (number referring to the corresponding
FIBERXX_PARAMS)
config PORT10_CONSTANT_ASYMMETRY
int "asymmetryCorrectionPortDS.constantAsymmetry"
default 0
help
Used to set the constant delay asymmetry.
choice
prompt "Number of port instances" default PORT10_INSTANCE_COUNT_1
config PORT10_INSTANCE_COUNT_0
bool "0"
config PORT10_INSTANCE_COUNT_1
bool "1"
config PORT10_INSTANCE_COUNT_2
bool "2"
endchoice
menu "Instance 1"
depends on PORT10_INSTANCE_COUNT_1 || PORT10_INSTANCE_COUNT_2
choice
prompt "Network protocol"
default PORT10_INST01_PROTOCOL_RAW
config PORT10_INST01_PROTOCOL_RAW
bool "IEEE 802.3"
config PORT10_INST01_PROTOCOL_UDP_IPV4
bool "UDP/Ipv4"
endchoice
choice
prompt "Delay mechanism"
default PORT10_INST01_MECHANISM_E2E
config PORT10_INST01_MECHANISM_E2E
bool "End-to-end"
config PORT10_INST01_MECHANISM_P2P
bool "Peer-to-peer"
endchoice
config PORT10_INST01_MONITOR
bool "SNMP monitoring"
default y
help
Option to disable or enable triggering errors in SNMP on a port
choice
prompt "Profile"
default PORT10_INST01_PROFILE_WR
config PORT10_INST01_PROFILE_PTP
bool "PTP"
config PORT10_INST01_PROFILE_WR
bool "White Rabbit"
config PORT10_INST01_PROFILE_CUSTOM
bool "Custom"
endchoice
choice
prompt "Desired state"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
default PORT10_INST01_DESIRADE_STATE_MASTER
config PORT10_INST01_DESIRADE_STATE_MASTER
bool "Master"
config PORT10_INST01_DESIRADE_STATE_SLAVE
bool "Slave"
config PORT10_INST01_DESIRADE_STATE_PASSIVE
bool "Passive"
endchoice
config PORT10_INST01_ASYMMETRY_CORRECTION_ENABLE
depends on !PORT10_INST01_PROFILE_HA && !PORT10_INST01_PROFILE_WR
bool "asymmetryCorrectionPortDS.enable"
default y
help
When supported, the value TRUE shall indicate that the mechanism of for the calculation
of the <delayAsymmetry> for certain media is enabled on the PTP port.
choice
prompt "BMCA mode"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y default PORT10_INST01_BMODE_MASTER_ONLY if TIME_GM || TIME_FM
default PORT10_INST01_BMODE_AUTO if TIME_BC
config PORT10_INST01_BMODE_MASTER_ONLY
bool "MasterOnly"
config PORT10_INST01_BMODE_AUTO
bool "Auto"
endchoice
config PORT10_INST01_EGRESS_LATENCY
int "timestampCorrectionPortDS.egressLatency (ps)"
default 225245
help
Defines the transmission constant delay (ps)
config PORT10_INST01_INGRESS_LATENCY
int "timestampCorrectionPortDS.ingressLatency (ps)"
default 228435
help
Defines the reception constant delay (ps)
config PORT10_INST01_ANNOUNCE_INTERVAL
int "logAnnounceInterval"
default 1
range 0 4
help
The mean time interval between transmissions of successive
Announce messages. The value is the logarithm to the base 2.
The configurable range shall be 0 to 4.
config PORT10_INST01_ANNOUNCE_RECEIPT_TIMEOUT
int "announceReceiptTimeout"
default 3
range 2 255
help
The announceReceiptTimeout specifies the number of announceIntervals
that must pass without receipt of an Announce message before the
occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 255
config PORT10_INST01_SYNC_INTERVAL
int "logSyncInterval"
default 0
range -1 1
help
The mean time interval between transmission of successive
Sync messages, i.e., the sync-interval, when transmitted
as multicast messages. The value is the logarithm to the base 2.
The configurable range shall be -1 to +1
config PORT10_INST01_MIN_DELAY_REQ_INTERVAL
depends on PORT10_INST01_MECHANISM_E2E
int "minDelayRequestInterval"
default 0
range 0 5
help
The minDelayRequestInterval specifies the minimum permitted
mean time interval between successive Delay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT10_INST01_MIN_PDELAY_REQ_INTERVAL
depends on PORT10_INST01_MECHANISM_P2P
int "minPDelayRequestInterval"
default 0
range 0 5
help
The minPDelayRequestInterval specifies the minimum permitted
mean time interval between successive Pdelay_Req messages.
The value is the logarithm to the base 2. The configurable range shall be 0 to 5
config PORT10_INST01_L1SYNC_ENABLED
depends on PORT10_INST01_PROFILE_CUSTOM
bool "L1SyncBasicPortDS.L1SyncEnabled"
default y
help
This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled
config PORT10_INST01_L1SYNC_INTERVAL
depends on PORT10_INST01_PROFILE_HA || (PORT10_INST01_PROFILE_CUSTOM && PORT10_INST01_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.logL1SyncInterval"
default 0
range -4 4
help
The L1Sync interval specifies the time interval
between successive periodic L1_SYNC TLV.
The value is the logarithm to the base 2.
The configurable range shall be -4 to 4
config PORT10_INST01_L1SYNC_RECEIPT_TIMEOUT
depends on PORT10_INST01_PROFILE_HA || (PORT10_INST01_PROFILE_CUSTOM && PORT10_INST01_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
default 3
range 2 10
help
The value of L1SyncReceiptTimeout specifies the number of elapsed
L1SyncIntervals that must pass without reception of the L1_SYNC TLV
before the L1_SYNC TLV reception timeout occurs.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 10
config PORT10_INST01_L1SYNC_TX_COHERENCY_IS_REQUIRED
depends on PORT10_INST01_PROFILE_CUSTOM && PORT10_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.txCoherencyIsRequired"
default y
help
The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a transmit coherent port.
config PORT10_INST01_L1SYNC_RX_COHERENCY_IS_REQUIRED
depends on PORT10_INST01_PROFILE_CUSTOM && PORT10_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
default y
help
The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a receive coherent port.
config PORT10_INST01_L1SYNC_CONGRUENCY_IS_REQUIRED
depends on PORT10_INST01_PROFILE_CUSTOM && PORT10_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.congruencyIsRequired"
default y
help
The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
be a congruent port
config PORT10_INST01_L1SYNC_OPT_PARAMS_ENABLED
depends on PORT10_INST01_PROFILE_CUSTOM && PORT10_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.optParamsEnabled"
default n
help
The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
TLV extends this TLV with the information about the optional parameters.
config PORT10_INST01_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
depends on PORT10_INST01_L1SYNC_OPT_PARAMS_ENABLED="y" bool "L1SyncBasicPortDS.timestampsCorrectedTx"
default n
help
When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE,
the L1Sync port shall correct the transmitted egress timestamps with
the known value of the phase offset.
endmenu
menu "Instance 2"
depends on PORT10_INSTANCE_COUNT_2
choice
prompt "Network protocol"
default PORT10_INST02_PROTOCOL_RAW
config PORT10_INST02_PROTOCOL_RAW
bool "IEEE 802.3"
config PORT10_INST02_PROTOCOL_UDP_IPV4
bool "UDP/Ipv4"
endchoice
choice
prompt "Delay mechanism"
default PORT10_INST02_MECHANISM_E2E
config PORT10_INST02_MECHANISM_E2E
bool "End-to-end"
config PORT10_INST02_MECHANISM_P2P
bool "Peer-to-peer"
endchoice
config PORT10_INST02_MONITOR
bool "SNMP monitoring"
default y
help
Option to disable or enable triggering errors in SNMP on a port
choice
prompt "Profile"
default PORT10_INST02_PROFILE_WR
config PORT10_INST02_PROFILE_PTP
bool "PTP"
config PORT10_INST02_PROFILE_WR
bool "White Rabbit"
config PORT10_INST02_PROFILE_CUSTOM
bool "Custom"
endchoice
choice
prompt "Desired state"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
default PORT10_INST02_DESIRADE_STATE_MASTER
config PORT10_INST02_DESIRADE_STATE_MASTER
bool "Master"
config PORT10_INST02_DESIRADE_STATE_SLAVE
bool "Slave"
config PORT10_INST02_DESIRADE_STATE_PASSIVE
bool "Passive"
endchoice
config PORT10_INST02_ASYMMETRY_CORRECTION_ENABLE
depends on !PORT10_INST02_PROFILE_HA && !PORT10_INST02_PROFILE_WR
bool "asymmetryCorrectionPortDS.enable"
default y
help
When supported, the value TRUE shall indicate that the mechanism of for the calculation
of the <delayAsymmetry> for certain media is enabled on the PTP port.
choice
prompt "BMCA mode"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y default PORT10_INST02_BMODE_MASTER_ONLY if TIME_GM || TIME_FM
default PORT10_INST02_BMODE_AUTO if TIME_BC
config PORT10_INST02_BMODE_MASTER_ONLY
bool "MasterOnly"
config PORT10_INST02_BMODE_AUTO
bool "Auto"
endchoice
config PORT10_INST02_EGRESS_LATENCY
int "timestampCorrectionPortDS.egressLatency (ps)"
default 225245
help
Defines the transmission constant delay (ps)
config PORT10_INST02_INGRESS_LATENCY
int "timestampCorrectionPortDS.ingressLatency (ps)"
default 228435
help
Defines the reception constant delay (ps)
config PORT10_INST02_ANNOUNCE_INTERVAL
int "logAnnounceInterval"
default 1
range 0 4
help
The mean time interval between transmissions of successive
Announce messages. The value is the logarithm to the base 2.
The configurable range shall be 0 to 4.
config PORT10_INST02_ANNOUNCE_RECEIPT_TIMEOUT
int "announceReceiptTimeout"
default 3
range 2 255
help
The announceReceiptTimeout specifies the number of announceIntervals
that must pass without receipt of an Announce message before the
occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 255
config PORT10_INST02_SYNC_INTERVAL
int "logSyncInterval"
default 0
range -1 1
help
The mean time interval between transmission of successive
Sync messages, i.e., the sync-interval, when transmitted
as multicast messages. The value is the logarithm to the base 2.
The configurable range shall be -1 to +1
config PORT10_INST02_MIN_DELAY_REQ_INTERVAL
depends on PORT10_INST02_MECHANISM_E2E
int "minDelayRequestInterval"
default 0
range 0 5
help
The minDelayRequestInterval specifies the minimum permitted
mean time interval between successive Delay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT10_INST02_MIN_PDELAY_REQ_INTERVAL
depends on PORT10_INST02_MECHANISM_P2P
int "minPDelayRequestInterval"
default 0
range 0 5
help
The minPDelayRequestInterval specifies the minimum permitted
mean time interval between successive Pdelay_Req messages.
The value is the logarithm to the base 2. The configurable range shall be 0 to 5
config PORT10_INST02_L1SYNC_ENABLED
depends on PORT10_INST02_PROFILE_CUSTOM
bool "L1SyncBasicPortDS.L1SyncEnabled"
default y
help
This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled
config PORT10_INST02_L1SYNC_INTERVAL
depends on PORT10_INST02_PROFILE_HA || (PORT10_INST02_PROFILE_CUSTOM && PORT10_INST02_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.logL1SyncInterval"
default 0
range -4 4
help
The L1Sync interval specifies the time interval
between successive periodic L1_SYNC TLV.
The value is the logarithm to the base 2.
The configurable range shall be -4 to 4
config PORT10_INST02_L1SYNC_RECEIPT_TIMEOUT
depends on PORT10_INST02_PROFILE_HA || (PORT10_INST02_PROFILE_CUSTOM && PORT10_INST02_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
default 3
range 2 10
help
The value of L1SyncReceiptTimeout specifies the number of elapsed
L1SyncIntervals that must pass without reception of the L1_SYNC TLV
before the L1_SYNC TLV reception timeout occurs.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 10
config PORT10_INST02_L1SYNC_TX_COHERENCY_IS_REQUIRED
depends on PORT10_INST02_PROFILE_CUSTOM && PORT10_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.txCoherencyIsRequired"
default y
help
The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a transmit coherent port.
config PORT10_INST02_L1SYNC_RX_COHERENCY_IS_REQUIRED
depends on PORT10_INST02_PROFILE_CUSTOM && PORT10_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
default y
help
The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a receive coherent port.
config PORT10_INST02_L1SYNC_CONGRUENCY_IS_REQUIRED
depends on PORT10_INST02_PROFILE_CUSTOM && PORT10_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.congruencyIsRequired"
default y
help
The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
be a congruent port
config PORT10_INST02_L1SYNC_OPT_PARAMS_ENABLED
depends on PORT10_INST02_PROFILE_CUSTOM && PORT10_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.optParamsEnabled"
default n
help
The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
TLV extends this TLV with the information about the optional parameters.
config PORT10_INST02_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
depends on PORT10_INST02_L1SYNC_OPT_PARAMS_ENABLED="y" bool "L1SyncBasicPortDS.timestampsCorrectedTx"
default n
help
When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE,
the L1Sync port shall correct the transmitted egress timestamps with
the known value of the phase offset.
endmenu
endmenu
menu "PORT 11"
config PORT11_IFACE
string "Network interface"
default "wri11"
help
Used to set the physical port interface name: "wri[1-18]"
config PORT11_FIBER
int "Fiber type"
default 0
help
Used to set the type of fiber (number referring to the corresponding
FIBERXX_PARAMS)
config PORT11_CONSTANT_ASYMMETRY
int "asymmetryCorrectionPortDS.constantAsymmetry"
default 0
help
Used to set the constant delay asymmetry.
choice
prompt "Number of port instances"
default PORT11_INSTANCE_COUNT_1
config PORT11_INSTANCE_COUNT_0
bool "0"
config PORT11_INSTANCE_COUNT_1
bool "1"
config PORT11_INSTANCE_COUNT_2
bool "2"
endchoice
menu "Instance 1"
depends on PORT11_INSTANCE_COUNT_1 || PORT11_INSTANCE_COUNT_2
choice
prompt "Network protocol"
default PORT11_INST01_PROTOCOL_RAW
config PORT11_INST01_PROTOCOL_RAW
bool "IEEE 802.3"
config PORT11_INST01_PROTOCOL_UDP_IPV4
bool "UDP/Ipv4"
endchoice
choice
prompt "Delay mechanism"
default PORT11_INST01_MECHANISM_E2E
config PORT11_INST01_MECHANISM_E2E
bool "End-to-end"
config PORT11_INST01_MECHANISM_P2P
bool "Peer-to-peer"
endchoice
config PORT11_INST01_MONITOR
bool "SNMP monitoring"
default y
help
Option to disable or enable triggering errors in SNMP on a port
choice
prompt "Profile"
default PORT11_INST01_PROFILE_WR
config PORT11_INST01_PROFILE_PTP
bool "PTP"
config PORT11_INST01_PROFILE_WR
bool "White Rabbit"
config PORT11_INST01_PROFILE_CUSTOM
bool "Custom"
endchoice
choice
prompt "Desired state"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
default PORT11_INST01_DESIRADE_STATE_MASTER
config PORT11_INST01_DESIRADE_STATE_MASTER
bool "Master"
config PORT11_INST01_DESIRADE_STATE_SLAVE
bool "Slave"
config PORT11_INST01_DESIRADE_STATE_PASSIVE
bool "Passive"
endchoice
config PORT11_INST01_ASYMMETRY_CORRECTION_ENABLE
depends on !PORT11_INST01_PROFILE_HA && !PORT11_INST01_PROFILE_WR
bool "asymmetryCorrectionPortDS.enable"
default y
help
When supported, the value TRUE shall indicate that the mechanism of for the calculation
of the <delayAsymmetry> for certain media is enabled on the PTP port.
choice
prompt "BMCA mode"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
default PORT11_INST01_BMODE_MASTER_ONLY if TIME_GM || TIME_FM
default PORT11_INST01_BMODE_AUTO if TIME_BC
config PORT11_INST01_BMODE_MASTER_ONLY
bool "MasterOnly"
config PORT11_INST01_BMODE_AUTO
bool "Auto"
endchoice
config PORT11_INST01_EGRESS_LATENCY
int "timestampCorrectionPortDS.egressLatency (ps)"
default 225463
help
Defines the transmission constant delay (ps)
config PORT11_INST01_INGRESS_LATENCY
int "timestampCorrectionPortDS.ingressLatency (ps)"
default 228963
help
Defines the reception constant delay (ps)
config PORT11_INST01_ANNOUNCE_INTERVAL
int "logAnnounceInterval"
default 1
range 0 4
help
The mean time interval between transmissions of successive
Announce messages. The value is the logarithm to the base 2.
The configurable range shall be 0 to 4.
config PORT11_INST01_ANNOUNCE_RECEIPT_TIMEOUT
int "announceReceiptTimeout"
default 3
range 2 255
help
The announceReceiptTimeout specifies the number of announceIntervals
that must pass without receipt of an Announce message before the occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 255
config PORT11_INST01_SYNC_INTERVAL
int "logSyncInterval"
default 0
range -1 1
help
The mean time interval between transmission of successive
Sync messages, i.e., the sync-interval, when transmitted
as multicast messages. The value is the logarithm to the base 2.
The configurable range shall be -1 to +1
config PORT11_INST01_MIN_DELAY_REQ_INTERVAL
depends on PORT11_INST01_MECHANISM_E2E
int "minDelayRequestInterval"
default 0
range 0 5
help
The minDelayRequestInterval specifies the minimum permitted
mean time interval between successive Delay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT11_INST01_MIN_PDELAY_REQ_INTERVAL
depends on PORT11_INST01_MECHANISM_P2P
int "minPDelayRequestInterval"
default 0
range 0 5
help
The minPDelayRequestInterval specifies the minimum permitted
mean time interval between successive Pdelay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT11_INST01_L1SYNC_ENABLED
depends on PORT11_INST01_PROFILE_CUSTOM
bool "L1SyncBasicPortDS.L1SyncEnabled"
default y
help
This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled
config PORT11_INST01_L1SYNC_INTERVAL
depends on PORT11_INST01_PROFILE_HA || (PORT11_INST01_PROFILE_CUSTOM && PORT11_INST01_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.logL1SyncInterval"
default 0
range -4 4
help
The L1Sync interval specifies the time interval
between successive periodic L1_SYNC TLV.
The value is the logarithm to the base 2.
The configurable range shall be -4 to 4
config PORT11_INST01_L1SYNC_RECEIPT_TIMEOUT
depends on PORT11_INST01_PROFILE_HA || (PORT11_INST01_PROFILE_CUSTOM && PORT11_INST01_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
default 3
range 2 10
help
The value of L1SyncReceiptTimeout specifies the number of elapsed
L1SyncIntervals that must pass without reception of the L1_SYNC TLV
before the L1_SYNC TLV reception timeout occurs.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 10
config PORT11_INST01_L1SYNC_TX_COHERENCY_IS_REQUIRED
depends on PORT11_INST01_PROFILE_CUSTOM && PORT11_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.txCoherencyIsRequired" default y
help
The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a transmit coherent port.
config PORT11_INST01_L1SYNC_RX_COHERENCY_IS_REQUIRED
depends on PORT11_INST01_PROFILE_CUSTOM && PORT11_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
default y
help
The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a receive coherent port.
config PORT11_INST01_L1SYNC_CONGRUENCY_IS_REQUIRED
depends on PORT11_INST01_PROFILE_CUSTOM && PORT11_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.congruencyIsRequired"
default y
help
The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
be a congruent port
config PORT11_INST01_L1SYNC_OPT_PARAMS_ENABLED
depends on PORT11_INST01_PROFILE_CUSTOM && PORT11_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.optParamsEnabled"
default n
help
The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
TLV extends this TLV with the information about the optional parameters.
config PORT11_INST01_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
depends on PORT11_INST01_L1SYNC_OPT_PARAMS_ENABLED="y"
bool "L1SyncBasicPortDS.timestampsCorrectedTx"
default n
help
When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE,
the L1Sync port shall correct the transmitted egress timestamps with
the known value of the phase offset.
endmenu
menu "Instance 2"
depends on PORT11_INSTANCE_COUNT_2
choice
prompt "Network protocol"
default PORT11_INST02_PROTOCOL_RAW
config PORT11_INST02_PROTOCOL_RAW
bool "IEEE 802.3"
config PORT11_INST02_PROTOCOL_UDP_IPV4
bool "UDP/Ipv4"
endchoice
choice
prompt "Delay mechanism"
default PORT11_INST02_MECHANISM_E2E
config PORT11_INST02_MECHANISM_E2E
bool "End-to-end"
config PORT11_INST02_MECHANISM_P2P
bool "Peer-to-peer"
endchoice
config PORT11_INST02_MONITOR
bool "SNMP monitoring"
default y
help
Option to disable or enable triggering errors in SNMP on a port
choice
prompt "Profile"
default PORT11_INST02_PROFILE_WR
config PORT11_INST02_PROFILE_PTP
bool "PTP"
config PORT11_INST02_PROFILE_WR
bool "White Rabbit"
config PORT11_INST02_PROFILE_CUSTOM
bool "Custom"
endchoice
choice
prompt "Desired state"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
default PORT11_INST02_DESIRADE_STATE_MASTER
config PORT11_INST02_DESIRADE_STATE_MASTER
bool "Master"
config PORT11_INST02_DESIRADE_STATE_SLAVE
bool "Slave"
config PORT11_INST02_DESIRADE_STATE_PASSIVE
bool "Passive"
endchoice
config PORT11_INST02_ASYMMETRY_CORRECTION_ENABLE
depends on !PORT11_INST02_PROFILE_HA && !PORT11_INST02_PROFILE_WR
bool "asymmetryCorrectionPortDS.enable"
default y
help
When supported, the value TRUE shall indicate that the mechanism of for the calculation
of the <delayAsymmetry> for certain media is enabled on the PTP port.
choice
prompt "BMCA mode"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
default PORT11_INST02_BMODE_MASTER_ONLY if TIME_GM || TIME_FM
default PORT11_INST02_BMODE_AUTO if TIME_BC
config PORT11_INST02_BMODE_MASTER_ONLY
bool "MasterOnly"
config PORT11_INST02_BMODE_AUTO
bool "Auto"
endchoice
config PORT11_INST02_EGRESS_LATENCY
int "timestampCorrectionPortDS.egressLatency (ps)"
default 225463
help
Defines the transmission constant delay (ps)
config PORT11_INST02_INGRESS_LATENCY
int "timestampCorrectionPortDS.ingressLatency (ps)"
default 228963
help
Defines the reception constant delay (ps)
config PORT11_INST02_ANNOUNCE_INTERVAL
int "logAnnounceInterval"
default 1
range 0 4
help
The mean time interval between transmissions of successive
Announce messages. The value is the logarithm to the base 2.
The configurable range shall be 0 to 4.
config PORT11_INST02_ANNOUNCE_RECEIPT_TIMEOUT
int "announceReceiptTimeout"
default 3
range 2 255
help
The announceReceiptTimeout specifies the number of announceIntervals
that must pass without receipt of an Announce message before the occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 255
config PORT11_INST02_SYNC_INTERVAL
int "logSyncInterval"
default 0
range -1 1
help
The mean time interval between transmission of successive
Sync messages, i.e., the sync-interval, when transmitted
as multicast messages. The value is the logarithm to the base 2.
The configurable range shall be -1 to +1
config PORT11_INST02_MIN_DELAY_REQ_INTERVAL
depends on PORT11_INST02_MECHANISM_E2E
int "minDelayRequestInterval"
default 0
range 0 5
help
The minDelayRequestInterval specifies the minimum permitted
mean time interval between successive Delay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT11_INST02_MIN_PDELAY_REQ_INTERVAL
depends on PORT11_INST02_MECHANISM_P2P
int "minPDelayRequestInterval"
default 0
range 0 5
help
The minPDelayRequestInterval specifies the minimum permitted
mean time interval between successive Pdelay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT11_INST02_L1SYNC_ENABLED
depends on PORT11_INST02_PROFILE_CUSTOM
bool "L1SyncBasicPortDS.L1SyncEnabled"
default y
help
This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled
config PORT11_INST02_L1SYNC_INTERVAL
depends on PORT11_INST02_PROFILE_HA || (PORT11_INST02_PROFILE_CUSTOM && PORT11_INST02_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.logL1SyncInterval"
default 0
range -4 4
help
The L1Sync interval specifies the time interval
between successive periodic L1_SYNC TLV.
The value is the logarithm to the base 2.
The configurable range shall be -4 to 4
config PORT11_INST02_L1SYNC_RECEIPT_TIMEOUT
depends on PORT11_INST02_PROFILE_HA || (PORT11_INST02_PROFILE_CUSTOM && PORT11_INST02_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
default 3
range 2 10
help
The value of L1SyncReceiptTimeout specifies the number of elapsed
L1SyncIntervals that must pass without reception of the L1_SYNC TLV
before the L1_SYNC TLV reception timeout occurs.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 10
config PORT11_INST02_L1SYNC_TX_COHERENCY_IS_REQUIRED
depends on PORT11_INST02_PROFILE_CUSTOM && PORT11_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.txCoherencyIsRequired" default y
help
The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a transmit coherent port.
config PORT11_INST02_L1SYNC_RX_COHERENCY_IS_REQUIRED
depends on PORT11_INST02_PROFILE_CUSTOM && PORT11_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
default y
help
The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a receive coherent port.
config PORT11_INST02_L1SYNC_CONGRUENCY_IS_REQUIRED
depends on PORT11_INST02_PROFILE_CUSTOM && PORT11_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.congruencyIsRequired"
default y
help
The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
be a congruent port
config PORT11_INST02_L1SYNC_OPT_PARAMS_ENABLED
depends on PORT11_INST02_PROFILE_CUSTOM && PORT11_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.optParamsEnabled"
default n
help
The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
TLV extends this TLV with the information about the optional parameters.
config PORT11_INST02_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
depends on PORT11_INST02_L1SYNC_OPT_PARAMS_ENABLED="y"
bool "L1SyncBasicPortDS.timestampsCorrectedTx"
default n
help
When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE,
the L1Sync port shall correct the transmitted egress timestamps with
the known value of the phase offset.
endmenu
endmenu
menu "PORT 12"
config PORT12_IFACE
string "Network interface"
default "wri12"
help
Used to set the physical port interface name: "wri[1-18]"
config PORT12_FIBER
int "Fiber type"
default 0
help
Used to set the type of fiber (number referring to the corresponding
FIBERXX_PARAMS)
config PORT12_CONSTANT_ASYMMETRY
int "asymmetryCorrectionPortDS.constantAsymmetry"
default 0
help
Used to set the constant delay asymmetry.
choice
prompt "Number of port instances"
default PORT12_INSTANCE_COUNT_1
config PORT12_INSTANCE_COUNT_0 bool "0"
config PORT12_INSTANCE_COUNT_1
bool "1"
config PORT12_INSTANCE_COUNT_2
bool "2"
endchoice
menu "Instance 1"
depends on PORT12_INSTANCE_COUNT_1 || PORT12_INSTANCE_COUNT_2
choice
prompt "Network protocol"
default PORT12_INST01_PROTOCOL_RAW
config PORT12_INST01_PROTOCOL_RAW
bool "IEEE 802.3"
config PORT12_INST01_PROTOCOL_UDP_IPV4
bool "UDP/Ipv4"
endchoice
choice
prompt "Delay mechanism"
default PORT12_INST01_MECHANISM_E2E
config PORT12_INST01_MECHANISM_E2E
bool "End-to-end"
config PORT12_INST01_MECHANISM_P2P
bool "Peer-to-peer"
endchoice
config PORT12_INST01_MONITOR
bool "SNMP monitoring"
default y
help
Option to disable or enable triggering errors in SNMP on a port
choice
prompt "Profile"
default PORT12_INST01_PROFILE_WR
config PORT12_INST01_PROFILE_PTP
bool "PTP"
config PORT12_INST01_PROFILE_WR
bool "White Rabbit"
config PORT12_INST01_PROFILE_CUSTOM
bool "Custom"
endchoice
choice
prompt "Desired state"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
default PORT12_INST01_DESIRADE_STATE_MASTER
config PORT12_INST01_DESIRADE_STATE_MASTER
bool "Master"
config PORT12_INST01_DESIRADE_STATE_SLAVE
bool "Slave"
config PORT12_INST01_DESIRADE_STATE_PASSIVE
bool "Passive"
endchoice
config PORT12_INST01_ASYMMETRY_CORRECTION_ENABLE
depends on !PORT12_INST01_PROFILE_HA && !PORT12_INST01_PROFILE_WR
bool "asymmetryCorrectionPortDS.enable"
default y
help
When supported, the value TRUE shall indicate that the mechanism of for the calculation
of the <delayAsymmetry> for certain media is enabled on the PTP port.
choice
prompt "BMCA mode"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
default PORT12_INST01_BMODE_MASTER_ONLY if TIME_GM || TIME_FM
default PORT12_INST01_BMODE_AUTO if TIME_BC config PORT12_INST01_BMODE_MASTER_ONLY
bool "MasterOnly"
config PORT12_INST01_BMODE_AUTO
bool "Auto"
endchoice
config PORT12_INST01_EGRESS_LATENCY
int "timestampCorrectionPortDS.egressLatency (ps)"
default 225645
help
Defines the transmission constant delay (ps)
config PORT12_INST01_INGRESS_LATENCY
int "timestampCorrectionPortDS.ingressLatency (ps)"
default 229107
help
Defines the reception constant delay (ps)
config PORT12_INST01_ANNOUNCE_INTERVAL
int "logAnnounceInterval"
default 1
range 0 4
help
The mean time interval between transmissions of successive
Announce messages. The value is the logarithm to the base 2.
The configurable range shall be 0 to 4.
config PORT12_INST01_ANNOUNCE_RECEIPT_TIMEOUT
int "announceReceiptTimeout"
default 3
range 2 255
help
The announceReceiptTimeout specifies the number of announceIntervals
that must pass without receipt of an Announce message before the
occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 255
config PORT12_INST01_SYNC_INTERVAL
int "logSyncInterval"
default 0
range -1 1
help
The mean time interval between transmission of successive
Sync messages, i.e., the sync-interval, when transmitted
as multicast messages. The value is the logarithm to the base 2.
The configurable range shall be -1 to +1
config PORT12_INST01_MIN_DELAY_REQ_INTERVAL
depends on PORT12_INST01_MECHANISM_E2E
int "minDelayRequestInterval"
default 0
range 0 5
help
The minDelayRequestInterval specifies the minimum permitted
mean time interval between successive Delay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT12_INST01_MIN_PDELAY_REQ_INTERVAL
depends on PORT12_INST01_MECHANISM_P2P
int "minPDelayRequestInterval"
default 0
range 0 5
help
The minPDelayRequestInterval specifies the minimum permitted
mean time interval between successive Pdelay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT12_INST01_L1SYNC_ENABLED
depends on PORT12_INST01_PROFILE_CUSTOM
bool "L1SyncBasicPortDS.L1SyncEnabled"
default y
help
This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled
config PORT12_INST01_L1SYNC_INTERVAL
depends on PORT12_INST01_PROFILE_HA || (PORT12_INST01_PROFILE_CUSTOM && PORT12_INST01_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.logL1SyncInterval"
default 0
range -4 4
help
The L1Sync interval specifies the time interval
between successive periodic L1_SYNC TLV.
The value is the logarithm to the base 2.
The configurable range shall be -4 to 4
config PORT12_INST01_L1SYNC_RECEIPT_TIMEOUT
depends on PORT12_INST01_PROFILE_HA || (PORT12_INST01_PROFILE_CUSTOM && PORT12_INST01_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
default 3
range 2 10
help
The value of L1SyncReceiptTimeout specifies the number of elapsed
L1SyncIntervals that must pass without reception of the L1_SYNC TLV
before the L1_SYNC TLV reception timeout occurs.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 10
config PORT12_INST01_L1SYNC_TX_COHERENCY_IS_REQUIRED
depends on PORT12_INST01_PROFILE_CUSTOM && PORT12_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.txCoherencyIsRequired"
default y
help
The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a transmit coherent port.
config PORT12_INST01_L1SYNC_RX_COHERENCY_IS_REQUIRED
depends on PORT12_INST01_PROFILE_CUSTOM && PORT12_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
default y
help
The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a receive coherent port.
config PORT12_INST01_L1SYNC_CONGRUENCY_IS_REQUIRED
depends on PORT12_INST01_PROFILE_CUSTOM && PORT12_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.congruencyIsRequired"
default y
help
The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
be a congruent port
config PORT12_INST01_L1SYNC_OPT_PARAMS_ENABLED
depends on PORT12_INST01_PROFILE_CUSTOM && PORT12_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.optParamsEnabled"
default n
help
The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
TLV extends this TLV with the information about the optional parameters.
config PORT12_INST01_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
depends on PORT12_INST01_L1SYNC_OPT_PARAMS_ENABLED="y"
bool "L1SyncBasicPortDS.timestampsCorrectedTx"
default n help
When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE,
the L1Sync port shall correct the transmitted egress timestamps with
the known value of the phase offset.
endmenu
menu "Instance 2"
depends on PORT12_INSTANCE_COUNT_2
choice
prompt "Network protocol"
default PORT12_INST02_PROTOCOL_RAW
config PORT12_INST02_PROTOCOL_RAW
bool "IEEE 802.3"
config PORT12_INST02_PROTOCOL_UDP_IPV4
bool "UDP/Ipv4"
endchoice
choice
prompt "Delay mechanism"
default PORT12_INST02_MECHANISM_E2E
config PORT12_INST02_MECHANISM_E2E
bool "End-to-end"
config PORT12_INST02_MECHANISM_P2P
bool "Peer-to-peer"
endchoice
config PORT12_INST02_MONITOR
bool "SNMP monitoring"
default y
help
Option to disable or enable triggering errors in SNMP on a port
choice
prompt "Profile"
default PORT12_INST02_PROFILE_WR
config PORT12_INST02_PROFILE_PTP
bool "PTP"
config PORT12_INST02_PROFILE_WR
bool "White Rabbit"
config PORT12_INST02_PROFILE_CUSTOM
bool "Custom"
endchoice
choice
prompt "Desired state"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
default PORT12_INST02_DESIRADE_STATE_MASTER
config PORT12_INST02_DESIRADE_STATE_MASTER
bool "Master"
config PORT12_INST02_DESIRADE_STATE_SLAVE
bool "Slave"
config PORT12_INST02_DESIRADE_STATE_PASSIVE
bool "Passive"
endchoice
config PORT12_INST02_ASYMMETRY_CORRECTION_ENABLE
depends on !PORT12_INST02_PROFILE_HA && !PORT12_INST02_PROFILE_WR
bool "asymmetryCorrectionPortDS.enable"
default y
help
When supported, the value TRUE shall indicate that the mechanism of for the calculation
of the <delayAsymmetry> for certain media is enabled on the PTP port.
choice
prompt "BMCA mode"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
default PORT12_INST02_BMODE_MASTER_ONLY if TIME_GM || TIME_FM
default PORT12_INST02_BMODE_AUTO if TIME_BC config PORT12_INST02_BMODE_MASTER_ONLY
bool "MasterOnly"
config PORT12_INST02_BMODE_AUTO
bool "Auto"
endchoice
config PORT12_INST02_EGRESS_LATENCY
int "timestampCorrectionPortDS.egressLatency (ps)"
default 225645
help
Defines the transmission constant delay (ps)
config PORT12_INST02_INGRESS_LATENCY
int "timestampCorrectionPortDS.ingressLatency (ps)"
default 229107
help
Defines the reception constant delay (ps)
config PORT12_INST02_ANNOUNCE_INTERVAL
int "logAnnounceInterval"
default 1
range 0 4
help
The mean time interval between transmissions of successive
Announce messages. The value is the logarithm to the base 2.
The configurable range shall be 0 to 4.
config PORT12_INST02_ANNOUNCE_RECEIPT_TIMEOUT
int "announceReceiptTimeout"
default 3
range 2 255
help
The announceReceiptTimeout specifies the number of announceIntervals
that must pass without receipt of an Announce message before the
occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 255
config PORT12_INST02_SYNC_INTERVAL
int "logSyncInterval"
default 0
range -1 1
help
The mean time interval between transmission of successive
Sync messages, i.e., the sync-interval, when transmitted
as multicast messages. The value is the logarithm to the base 2.
The configurable range shall be -1 to +1
config PORT12_INST02_MIN_DELAY_REQ_INTERVAL
depends on PORT12_INST02_MECHANISM_E2E
int "minDelayRequestInterval"
default 0
range 0 5
help
The minDelayRequestInterval specifies the minimum permitted
mean time interval between successive Delay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT12_INST02_MIN_PDELAY_REQ_INTERVAL
depends on PORT12_INST02_MECHANISM_P2P
int "minPDelayRequestInterval"
default 0
range 0 5
help
The minPDelayRequestInterval specifies the minimum permitted
mean time interval between successive Pdelay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT12_INST02_L1SYNC_ENABLED
depends on PORT12_INST02_PROFILE_CUSTOM
bool "L1SyncBasicPortDS.L1SyncEnabled"
default y
help
This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled
config PORT12_INST02_L1SYNC_INTERVAL
depends on PORT12_INST02_PROFILE_HA || (PORT12_INST02_PROFILE_CUSTOM && PORT12_INST02_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.logL1SyncInterval"
default 0
range -4 4
help
The L1Sync interval specifies the time interval
between successive periodic L1_SYNC TLV.
The value is the logarithm to the base 2.
The configurable range shall be -4 to 4
config PORT12_INST02_L1SYNC_RECEIPT_TIMEOUT
depends on PORT12_INST02_PROFILE_HA || (PORT12_INST02_PROFILE_CUSTOM && PORT12_INST02_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
default 3
range 2 10
help
The value of L1SyncReceiptTimeout specifies the number of elapsed
L1SyncIntervals that must pass without reception of the L1_SYNC TLV
before the L1_SYNC TLV reception timeout occurs.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 10
config PORT12_INST02_L1SYNC_TX_COHERENCY_IS_REQUIRED
depends on PORT12_INST02_PROFILE_CUSTOM && PORT12_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.txCoherencyIsRequired"
default y
help
The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a transmit coherent port.
config PORT12_INST02_L1SYNC_RX_COHERENCY_IS_REQUIRED
depends on PORT12_INST02_PROFILE_CUSTOM && PORT12_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
default y
help
The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a receive coherent port.
config PORT12_INST02_L1SYNC_CONGRUENCY_IS_REQUIRED
depends on PORT12_INST02_PROFILE_CUSTOM && PORT12_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.congruencyIsRequired"
default y
help
The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
be a congruent port
config PORT12_INST02_L1SYNC_OPT_PARAMS_ENABLED
depends on PORT12_INST02_PROFILE_CUSTOM && PORT12_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.optParamsEnabled"
default n
help
The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
TLV extends this TLV with the information about the optional parameters.
config PORT12_INST02_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
depends on PORT12_INST02_L1SYNC_OPT_PARAMS_ENABLED="y"
bool "L1SyncBasicPortDS.timestampsCorrectedTx"
default n help
When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE,
the L1Sync port shall correct the transmitted egress timestamps with
the known value of the phase offset.
endmenu
endmenu
menu "PORT 13"
config PORT13_IFACE
string "Network interface"
default "wri13"
help
Used to set the physical port interface name: "wri[1-18]"
config PORT13_FIBER
int "Fiber type"
default 0
help
Used to set the type of fiber (number referring to the corresponding
FIBERXX_PARAMS)
config PORT13_CONSTANT_ASYMMETRY
int "asymmetryCorrectionPortDS.constantAsymmetry"
default 0
help
Used to set the constant delay asymmetry.
choice
prompt "Number of port instances"
default PORT13_INSTANCE_COUNT_1
config PORT13_INSTANCE_COUNT_0
bool "0"
config PORT13_INSTANCE_COUNT_1
bool "1"
config PORT13_INSTANCE_COUNT_2
bool "2"
endchoice
menu "Instance 1"
depends on PORT13_INSTANCE_COUNT_1 || PORT13_INSTANCE_COUNT_2
choice
prompt "Network protocol"
default PORT13_INST01_PROTOCOL_RAW
config PORT13_INST01_PROTOCOL_RAW
bool "IEEE 802.3"
config PORT13_INST01_PROTOCOL_UDP_IPV4
bool "UDP/Ipv4"
endchoice
choice
prompt "Delay mechanism"
default PORT13_INST01_MECHANISM_E2E
config PORT13_INST01_MECHANISM_E2E
bool "End-to-end"
config PORT13_INST01_MECHANISM_P2P
bool "Peer-to-peer"
endchoice
config PORT13_INST01_MONITOR
bool "SNMP monitoring"
default y
help
Option to disable or enable triggering errors in SNMP on a port
choice
prompt "Profile" default PORT13_INST01_PROFILE_WR
config PORT13_INST01_PROFILE_PTP
bool "PTP"
config PORT13_INST01_PROFILE_WR
bool "White Rabbit"
config PORT13_INST01_PROFILE_CUSTOM
bool "Custom"
endchoice
choice
prompt "Desired state"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
default PORT13_INST01_DESIRADE_STATE_MASTER
config PORT13_INST01_DESIRADE_STATE_MASTER
bool "Master"
config PORT13_INST01_DESIRADE_STATE_SLAVE
bool "Slave"
config PORT13_INST01_DESIRADE_STATE_PASSIVE
bool "Passive"
endchoice
config PORT13_INST01_ASYMMETRY_CORRECTION_ENABLE
depends on !PORT13_INST01_PROFILE_HA && !PORT13_INST01_PROFILE_WR
bool "asymmetryCorrectionPortDS.enable"
default y
help
When supported, the value TRUE shall indicate that the mechanism of for the calculation
of the <delayAsymmetry> for certain media is enabled on the PTP port.
choice
prompt "BMCA mode"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
default PORT13_INST01_BMODE_MASTER_ONLY if TIME_GM || TIME_FM
default PORT13_INST01_BMODE_AUTO if TIME_BC
config PORT13_INST01_BMODE_MASTER_ONLY
bool "MasterOnly"
config PORT13_INST01_BMODE_AUTO
bool "Auto"
endchoice
config PORT13_INST01_EGRESS_LATENCY
int "timestampCorrectionPortDS.egressLatency (ps)"
default 225801
help
Defines the transmission constant delay (ps)
config PORT13_INST01_INGRESS_LATENCY
int "timestampCorrectionPortDS.ingressLatency (ps)"
default 229225
help
Defines the reception constant delay (ps)
config PORT13_INST01_ANNOUNCE_INTERVAL
int "logAnnounceInterval"
default 1
range 0 4
help
The mean time interval between transmissions of successive
Announce messages. The value is the logarithm to the base 2.
The configurable range shall be 0 to 4.
config PORT13_INST01_ANNOUNCE_RECEIPT_TIMEOUT
int "announceReceiptTimeout"
default 3
range 2 255
help
The announceReceiptTimeout specifies the number of announceIntervals
that must pass without receipt of an Announce message before the
occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
The value is the logarithm to the base 2. The configurable range shall be 2 to 255
config PORT13_INST01_SYNC_INTERVAL
int "logSyncInterval"
default 0
range -1 1
help
The mean time interval between transmission of successive
Sync messages, i.e., the sync-interval, when transmitted
as multicast messages. The value is the logarithm to the base 2.
The configurable range shall be -1 to +1
config PORT13_INST01_MIN_DELAY_REQ_INTERVAL
depends on PORT13_INST01_MECHANISM_E2E
int "minDelayRequestInterval"
default 0
range 0 5
help
The minDelayRequestInterval specifies the minimum permitted
mean time interval between successive Delay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT13_INST01_MIN_PDELAY_REQ_INTERVAL
depends on PORT13_INST01_MECHANISM_P2P
int "minPDelayRequestInterval"
default 0
range 0 5
help
The minPDelayRequestInterval specifies the minimum permitted
mean time interval between successive Pdelay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT13_INST01_L1SYNC_ENABLED
depends on PORT13_INST01_PROFILE_CUSTOM
bool "L1SyncBasicPortDS.L1SyncEnabled"
default y
help
This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled
config PORT13_INST01_L1SYNC_INTERVAL
depends on PORT13_INST01_PROFILE_HA || (PORT13_INST01_PROFILE_CUSTOM && PORT13_INST01_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.logL1SyncInterval"
default 0
range -4 4
help
The L1Sync interval specifies the time interval
between successive periodic L1_SYNC TLV.
The value is the logarithm to the base 2.
The configurable range shall be -4 to 4
config PORT13_INST01_L1SYNC_RECEIPT_TIMEOUT
depends on PORT13_INST01_PROFILE_HA || (PORT13_INST01_PROFILE_CUSTOM && PORT13_INST01_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
default 3
range 2 10
help
The value of L1SyncReceiptTimeout specifies the number of elapsed
L1SyncIntervals that must pass without reception of the L1_SYNC TLV
before the L1_SYNC TLV reception timeout occurs.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 10
config PORT13_INST01_L1SYNC_TX_COHERENCY_IS_REQUIRED
depends on PORT13_INST01_PROFILE_CUSTOM && PORT13_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.txCoherencyIsRequired"
default y
help The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a transmit coherent port.
config PORT13_INST01_L1SYNC_RX_COHERENCY_IS_REQUIRED
depends on PORT13_INST01_PROFILE_CUSTOM && PORT13_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
default y
help
The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a receive coherent port.
config PORT13_INST01_L1SYNC_CONGRUENCY_IS_REQUIRED
depends on PORT13_INST01_PROFILE_CUSTOM && PORT13_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.congruencyIsRequired"
default y
help
The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
be a congruent port
config PORT13_INST01_L1SYNC_OPT_PARAMS_ENABLED
depends on PORT13_INST01_PROFILE_CUSTOM && PORT13_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.optParamsEnabled"
default n
help
The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
TLV extends this TLV with the information about the optional parameters.
config PORT13_INST01_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
depends on PORT13_INST01_L1SYNC_OPT_PARAMS_ENABLED="y"
bool "L1SyncBasicPortDS.timestampsCorrectedTx"
default n
help
When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE,
the L1Sync port shall correct the transmitted egress timestamps with
the known value of the phase offset.
endmenu
menu "Instance 2"
depends on PORT13_INSTANCE_COUNT_2
choice
prompt "Network protocol"
default PORT13_INST02_PROTOCOL_RAW
config PORT13_INST02_PROTOCOL_RAW
bool "IEEE 802.3"
config PORT13_INST02_PROTOCOL_UDP_IPV4
bool "UDP/Ipv4"
endchoice
choice
prompt "Delay mechanism"
default PORT13_INST02_MECHANISM_E2E
config PORT13_INST02_MECHANISM_E2E
bool "End-to-end"
config PORT13_INST02_MECHANISM_P2P
bool "Peer-to-peer"
endchoice
config PORT13_INST02_MONITOR
bool "SNMP monitoring"
default y
help
Option to disable or enable triggering errors in SNMP on a port
choice
prompt "Profile" default PORT13_INST02_PROFILE_WR
config PORT13_INST02_PROFILE_PTP
bool "PTP"
config PORT13_INST02_PROFILE_WR
bool "White Rabbit"
config PORT13_INST02_PROFILE_CUSTOM
bool "Custom"
endchoice
choice
prompt "Desired state"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
default PORT13_INST02_DESIRADE_STATE_MASTER
config PORT13_INST02_DESIRADE_STATE_MASTER
bool "Master"
config PORT13_INST02_DESIRADE_STATE_SLAVE
bool "Slave"
config PORT13_INST02_DESIRADE_STATE_PASSIVE
bool "Passive"
endchoice
config PORT13_INST02_ASYMMETRY_CORRECTION_ENABLE
depends on !PORT13_INST02_PROFILE_HA && !PORT13_INST02_PROFILE_WR
bool "asymmetryCorrectionPortDS.enable"
default y
help
When supported, the value TRUE shall indicate that the mechanism of for the calculation
of the <delayAsymmetry> for certain media is enabled on the PTP port.
choice
prompt "BMCA mode"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
default PORT13_INST02_BMODE_MASTER_ONLY if TIME_GM || TIME_FM
default PORT13_INST02_BMODE_AUTO if TIME_BC
config PORT13_INST02_BMODE_MASTER_ONLY
bool "MasterOnly"
config PORT13_INST02_BMODE_AUTO
bool "Auto"
endchoice
config PORT13_INST02_EGRESS_LATENCY
int "timestampCorrectionPortDS.egressLatency (ps)"
default 225801
help
Defines the transmission constant delay (ps)
config PORT13_INST02_INGRESS_LATENCY
int "timestampCorrectionPortDS.ingressLatency (ps)"
default 229225
help
Defines the reception constant delay (ps)
config PORT13_INST02_ANNOUNCE_INTERVAL
int "logAnnounceInterval"
default 1
range 0 4
help
The mean time interval between transmissions of successive
Announce messages. The value is the logarithm to the base 2.
The configurable range shall be 0 to 4.
config PORT13_INST02_ANNOUNCE_RECEIPT_TIMEOUT
int "announceReceiptTimeout"
default 3
range 2 255
help
The announceReceiptTimeout specifies the number of announceIntervals
that must pass without receipt of an Announce message before the
occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
The value is the logarithm to the base 2. The configurable range shall be 2 to 255
config PORT13_INST02_SYNC_INTERVAL
int "logSyncInterval"
default 0
range -1 1
help
The mean time interval between transmission of successive
Sync messages, i.e., the sync-interval, when transmitted
as multicast messages. The value is the logarithm to the base 2.
The configurable range shall be -1 to +1
config PORT13_INST02_MIN_DELAY_REQ_INTERVAL
depends on PORT13_INST02_MECHANISM_E2E
int "minDelayRequestInterval"
default 0
range 0 5
help
The minDelayRequestInterval specifies the minimum permitted
mean time interval between successive Delay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT13_INST02_MIN_PDELAY_REQ_INTERVAL
depends on PORT13_INST02_MECHANISM_P2P
int "minPDelayRequestInterval"
default 0
range 0 5
help
The minPDelayRequestInterval specifies the minimum permitted
mean time interval between successive Pdelay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT13_INST02_L1SYNC_ENABLED
depends on PORT13_INST02_PROFILE_CUSTOM
bool "L1SyncBasicPortDS.L1SyncEnabled"
default y
help
This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled
config PORT13_INST02_L1SYNC_INTERVAL
depends on PORT13_INST02_PROFILE_HA || (PORT13_INST02_PROFILE_CUSTOM && PORT13_INST02_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.logL1SyncInterval"
default 0
range -4 4
help
The L1Sync interval specifies the time interval
between successive periodic L1_SYNC TLV.
The value is the logarithm to the base 2.
The configurable range shall be -4 to 4
config PORT13_INST02_L1SYNC_RECEIPT_TIMEOUT
depends on PORT13_INST02_PROFILE_HA || (PORT13_INST02_PROFILE_CUSTOM && PORT13_INST02_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
default 3
range 2 10
help
The value of L1SyncReceiptTimeout specifies the number of elapsed
L1SyncIntervals that must pass without reception of the L1_SYNC TLV
before the L1_SYNC TLV reception timeout occurs.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 10
config PORT13_INST02_L1SYNC_TX_COHERENCY_IS_REQUIRED
depends on PORT13_INST02_PROFILE_CUSTOM && PORT13_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.txCoherencyIsRequired"
default y
help The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a transmit coherent port.
config PORT13_INST02_L1SYNC_RX_COHERENCY_IS_REQUIRED
depends on PORT13_INST02_PROFILE_CUSTOM && PORT13_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
default y
help
The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a receive coherent port.
config PORT13_INST02_L1SYNC_CONGRUENCY_IS_REQUIRED
depends on PORT13_INST02_PROFILE_CUSTOM && PORT13_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.congruencyIsRequired"
default y
help
The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
be a congruent port
config PORT13_INST02_L1SYNC_OPT_PARAMS_ENABLED
depends on PORT13_INST02_PROFILE_CUSTOM && PORT13_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.optParamsEnabled"
default n
help
The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
TLV extends this TLV with the information about the optional parameters.
config PORT13_INST02_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
depends on PORT13_INST02_L1SYNC_OPT_PARAMS_ENABLED="y"
bool "L1SyncBasicPortDS.timestampsCorrectedTx"
default n
help
When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE,
the L1Sync port shall correct the transmitted egress timestamps with
the known value of the phase offset.
endmenu
endmenu
menu "PORT 14"
config PORT14_IFACE
string "Network interface"
default "wri14"
help
Used to set the physical port interface name: "wri[1-18]"
config PORT14_FIBER
int "Fiber type"
default 0
help
Used to set the type of fiber (number referring to the corresponding
FIBERXX_PARAMS)
config PORT14_CONSTANT_ASYMMETRY
int "asymmetryCorrectionPortDS.constantAsymmetry"
default 0
help
Used to set the constant delay asymmetry.
choice
prompt "Number of port instances"
default PORT14_INSTANCE_COUNT_1
config PORT14_INSTANCE_COUNT_0
bool "0"
config PORT14_INSTANCE_COUNT_1 bool "1"
config PORT14_INSTANCE_COUNT_2
bool "2"
endchoice
menu "Instance 1"
depends on PORT14_INSTANCE_COUNT_1 || PORT14_INSTANCE_COUNT_2
choice
prompt "Network protocol"
default PORT14_INST01_PROTOCOL_RAW
config PORT14_INST01_PROTOCOL_RAW
bool "IEEE 802.3"
config PORT14_INST01_PROTOCOL_UDP_IPV4
bool "UDP/Ipv4"
endchoice
choice
prompt "Delay mechanism"
default PORT14_INST01_MECHANISM_E2E
config PORT14_INST01_MECHANISM_E2E
bool "End-to-end"
config PORT14_INST01_MECHANISM_P2P
bool "Peer-to-peer"
endchoice
config PORT14_INST01_MONITOR
bool "SNMP monitoring"
default y
help
Option to disable or enable triggering errors in SNMP on a port
choice
prompt "Profile"
default PORT14_INST01_PROFILE_WR
config PORT14_INST01_PROFILE_PTP
bool "PTP"
config PORT14_INST01_PROFILE_WR
bool "White Rabbit"
config PORT14_INST01_PROFILE_CUSTOM
bool "Custom"
endchoice
choice
prompt "Desired state"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
default PORT14_INST01_DESIRADE_STATE_MASTER
config PORT14_INST01_DESIRADE_STATE_MASTER
bool "Master"
config PORT14_INST01_DESIRADE_STATE_SLAVE
bool "Slave"
config PORT14_INST01_DESIRADE_STATE_PASSIVE
bool "Passive"
endchoice
config PORT14_INST01_ASYMMETRY_CORRECTION_ENABLE
depends on !PORT14_INST01_PROFILE_HA && !PORT14_INST01_PROFILE_WR
bool "asymmetryCorrectionPortDS.enable"
default y
help
When supported, the value TRUE shall indicate that the mechanism of for the calculation
of the <delayAsymmetry> for certain media is enabled on the PTP port.
choice
prompt "BMCA mode"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
default PORT14_INST01_BMODE_MASTER_ONLY if TIME_GM || TIME_FM
default PORT14_INST01_BMODE_AUTO if TIME_BC
config PORT14_INST01_BMODE_MASTER_ONLY
bool "MasterOnly" config PORT14_INST01_BMODE_AUTO
bool "Auto"
endchoice
config PORT14_INST01_EGRESS_LATENCY
int "timestampCorrectionPortDS.egressLatency (ps)"
default 225983
help
Defines the transmission constant delay (ps)
config PORT14_INST01_INGRESS_LATENCY
int "timestampCorrectionPortDS.ingressLatency (ps)"
default 229463
help
Defines the reception constant delay (ps)
config PORT14_INST01_ANNOUNCE_INTERVAL
int "logAnnounceInterval"
default 1
range 0 4
help
The mean time interval between transmissions of successive
Announce messages. The value is the logarithm to the base 2.
The configurable range shall be 0 to 4.
config PORT14_INST01_ANNOUNCE_RECEIPT_TIMEOUT
int "announceReceiptTimeout"
default 3
range 2 255
help
The announceReceiptTimeout specifies the number of announceIntervals
that must pass without receipt of an Announce message before the
occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 255
config PORT14_INST01_SYNC_INTERVAL
int "logSyncInterval"
default 0
range -1 1
help
The mean time interval between transmission of successive
Sync messages, i.e., the sync-interval, when transmitted
as multicast messages. The value is the logarithm to the base 2.
The configurable range shall be -1 to +1
config PORT14_INST01_MIN_DELAY_REQ_INTERVAL
depends on PORT14_INST01_MECHANISM_E2E
int "minDelayRequestInterval"
default 0
range 0 5
help
The minDelayRequestInterval specifies the minimum permitted
mean time interval between successive Delay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT14_INST01_MIN_PDELAY_REQ_INTERVAL
depends on PORT14_INST01_MECHANISM_P2P
int "minPDelayRequestInterval"
default 0
range 0 5
help
The minPDelayRequestInterval specifies the minimum permitted
mean time interval between successive Pdelay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT14_INST01_L1SYNC_ENABLED
depends on PORT14_INST01_PROFILE_CUSTOM bool "L1SyncBasicPortDS.L1SyncEnabled"
default y
help
This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled
config PORT14_INST01_L1SYNC_INTERVAL
depends on PORT14_INST01_PROFILE_HA || (PORT14_INST01_PROFILE_CUSTOM && PORT14_INST01_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.logL1SyncInterval"
default 0
range -4 4
help
The L1Sync interval specifies the time interval
between successive periodic L1_SYNC TLV.
The value is the logarithm to the base 2.
The configurable range shall be -4 to 4
config PORT14_INST01_L1SYNC_RECEIPT_TIMEOUT
depends on PORT14_INST01_PROFILE_HA || (PORT14_INST01_PROFILE_CUSTOM && PORT14_INST01_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
default 3
range 2 10
help
The value of L1SyncReceiptTimeout specifies the number of elapsed
L1SyncIntervals that must pass without reception of the L1_SYNC TLV
before the L1_SYNC TLV reception timeout occurs.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 10
config PORT14_INST01_L1SYNC_TX_COHERENCY_IS_REQUIRED
depends on PORT14_INST01_PROFILE_CUSTOM && PORT14_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.txCoherencyIsRequired"
default y
help
The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a transmit coherent port.
config PORT14_INST01_L1SYNC_RX_COHERENCY_IS_REQUIRED
depends on PORT14_INST01_PROFILE_CUSTOM && PORT14_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
default y
help
The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a receive coherent port.
config PORT14_INST01_L1SYNC_CONGRUENCY_IS_REQUIRED
depends on PORT14_INST01_PROFILE_CUSTOM && PORT14_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.congruencyIsRequired"
default y
help
The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
be a congruent port
config PORT14_INST01_L1SYNC_OPT_PARAMS_ENABLED
depends on PORT14_INST01_PROFILE_CUSTOM && PORT14_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.optParamsEnabled"
default n
help
The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
TLV extends this TLV with the information about the optional parameters.
config PORT14_INST01_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
depends on PORT14_INST01_L1SYNC_OPT_PARAMS_ENABLED="y"
bool "L1SyncBasicPortDS.timestampsCorrectedTx"
default n
help
When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE, the L1Sync port shall correct the transmitted egress timestamps with
the known value of the phase offset.
endmenu
menu "Instance 2"
depends on PORT14_INSTANCE_COUNT_2
choice
prompt "Network protocol"
default PORT14_INST02_PROTOCOL_RAW
config PORT14_INST02_PROTOCOL_RAW
bool "IEEE 802.3"
config PORT14_INST02_PROTOCOL_UDP_IPV4
bool "UDP/Ipv4"
endchoice
choice
prompt "Delay mechanism"
default PORT14_INST02_MECHANISM_E2E
config PORT14_INST02_MECHANISM_E2E
bool "End-to-end"
config PORT14_INST02_MECHANISM_P2P
bool "Peer-to-peer"
endchoice
config PORT14_INST02_MONITOR
bool "SNMP monitoring"
default y
help
Option to disable or enable triggering errors in SNMP on a port
choice
prompt "Profile"
default PORT14_INST02_PROFILE_WR
config PORT14_INST02_PROFILE_PTP
bool "PTP"
config PORT14_INST02_PROFILE_WR
bool "White Rabbit"
config PORT14_INST02_PROFILE_CUSTOM
bool "Custom"
endchoice
choice
prompt "Desired state"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
default PORT14_INST02_DESIRADE_STATE_MASTER
config PORT14_INST02_DESIRADE_STATE_MASTER
bool "Master"
config PORT14_INST02_DESIRADE_STATE_SLAVE
bool "Slave"
config PORT14_INST02_DESIRADE_STATE_PASSIVE
bool "Passive"
endchoice
config PORT14_INST02_ASYMMETRY_CORRECTION_ENABLE
depends on !PORT14_INST02_PROFILE_HA && !PORT14_INST02_PROFILE_WR
bool "asymmetryCorrectionPortDS.enable"
default y
help
When supported, the value TRUE shall indicate that the mechanism of for the calculation
of the <delayAsymmetry> for certain media is enabled on the PTP port.
choice
prompt "BMCA mode"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
default PORT14_INST02_BMODE_MASTER_ONLY if TIME_GM || TIME_FM
default PORT14_INST02_BMODE_AUTO if TIME_BC
config PORT14_INST02_BMODE_MASTER_ONLY
bool "MasterOnly" config PORT14_INST02_BMODE_AUTO
bool "Auto"
endchoice
config PORT14_INST02_EGRESS_LATENCY
int "timestampCorrectionPortDS.egressLatency (ps)"
default 225983
help
Defines the transmission constant delay (ps)
config PORT14_INST02_INGRESS_LATENCY
int "timestampCorrectionPortDS.ingressLatency (ps)"
default 229463
help
Defines the reception constant delay (ps)
config PORT14_INST02_ANNOUNCE_INTERVAL
int "logAnnounceInterval"
default 1
range 0 4
help
The mean time interval between transmissions of successive
Announce messages. The value is the logarithm to the base 2.
The configurable range shall be 0 to 4.
config PORT14_INST02_ANNOUNCE_RECEIPT_TIMEOUT
int "announceReceiptTimeout"
default 3
range 2 255
help
The announceReceiptTimeout specifies the number of announceIntervals
that must pass without receipt of an Announce message before the
occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 255
config PORT14_INST02_SYNC_INTERVAL
int "logSyncInterval"
default 0
range -1 1
help
The mean time interval between transmission of successive
Sync messages, i.e., the sync-interval, when transmitted
as multicast messages. The value is the logarithm to the base 2.
The configurable range shall be -1 to +1
config PORT14_INST02_MIN_DELAY_REQ_INTERVAL
depends on PORT14_INST02_MECHANISM_E2E
int "minDelayRequestInterval"
default 0
range 0 5
help
The minDelayRequestInterval specifies the minimum permitted
mean time interval between successive Delay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT14_INST02_MIN_PDELAY_REQ_INTERVAL
depends on PORT14_INST02_MECHANISM_P2P
int "minPDelayRequestInterval"
default 0
range 0 5
help
The minPDelayRequestInterval specifies the minimum permitted
mean time interval between successive Pdelay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT14_INST02_L1SYNC_ENABLED
depends on PORT14_INST02_PROFILE_CUSTOM bool "L1SyncBasicPortDS.L1SyncEnabled"
default y
help
This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled
config PORT14_INST02_L1SYNC_INTERVAL
depends on PORT14_INST02_PROFILE_HA || (PORT14_INST02_PROFILE_CUSTOM && PORT14_INST02_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.logL1SyncInterval"
default 0
range -4 4
help
The L1Sync interval specifies the time interval
between successive periodic L1_SYNC TLV.
The value is the logarithm to the base 2.
The configurable range shall be -4 to 4
config PORT14_INST02_L1SYNC_RECEIPT_TIMEOUT
depends on PORT14_INST02_PROFILE_HA || (PORT14_INST02_PROFILE_CUSTOM && PORT14_INST02_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
default 3
range 2 10
help
The value of L1SyncReceiptTimeout specifies the number of elapsed
L1SyncIntervals that must pass without reception of the L1_SYNC TLV
before the L1_SYNC TLV reception timeout occurs.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 10
config PORT14_INST02_L1SYNC_TX_COHERENCY_IS_REQUIRED
depends on PORT14_INST02_PROFILE_CUSTOM && PORT14_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.txCoherencyIsRequired"
default y
help
The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a transmit coherent port.
config PORT14_INST02_L1SYNC_RX_COHERENCY_IS_REQUIRED
depends on PORT14_INST02_PROFILE_CUSTOM && PORT14_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
default y
help
The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a receive coherent port.
config PORT14_INST02_L1SYNC_CONGRUENCY_IS_REQUIRED
depends on PORT14_INST02_PROFILE_CUSTOM && PORT14_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.congruencyIsRequired"
default y
help
The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
be a congruent port
config PORT14_INST02_L1SYNC_OPT_PARAMS_ENABLED
depends on PORT14_INST02_PROFILE_CUSTOM && PORT14_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.optParamsEnabled"
default n
help
The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
TLV extends this TLV with the information about the optional parameters.
config PORT14_INST02_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
depends on PORT14_INST02_L1SYNC_OPT_PARAMS_ENABLED="y"
bool "L1SyncBasicPortDS.timestampsCorrectedTx"
default n
help
When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE, the L1Sync port shall correct the transmitted egress timestamps with
the known value of the phase offset.
endmenu
endmenu
menu "PORT 15"
config PORT15_IFACE
string "Network interface"
default "wri15"
help
Used to set the physical port interface name: "wri[1-18]"
config PORT15_FIBER
int "Fiber type"
default 0
help
Used to set the type of fiber (number referring to the corresponding
FIBERXX_PARAMS)
config PORT15_CONSTANT_ASYMMETRY
int "asymmetryCorrectionPortDS.constantAsymmetry"
default 0
help
Used to set the constant delay asymmetry.
choice
prompt "Number of port instances"
default PORT15_INSTANCE_COUNT_1
config PORT15_INSTANCE_COUNT_0
bool "0"
config PORT15_INSTANCE_COUNT_1
bool "1"
config PORT15_INSTANCE_COUNT_2
bool "2"
endchoice
menu "Instance 1"
depends on PORT15_INSTANCE_COUNT_1 || PORT15_INSTANCE_COUNT_2
choice
prompt "Network protocol"
default PORT15_INST01_PROTOCOL_RAW
config PORT15_INST01_PROTOCOL_RAW
bool "IEEE 802.3"
config PORT15_INST01_PROTOCOL_UDP_IPV4
bool "UDP/Ipv4"
endchoice
choice
prompt "Delay mechanism"
default PORT15_INST01_MECHANISM_E2E
config PORT15_INST01_MECHANISM_E2E
bool "End-to-end"
config PORT15_INST01_MECHANISM_P2P
bool "Peer-to-peer"
endchoice
config PORT15_INST01_MONITOR
bool "SNMP monitoring"
default y
help
Option to disable or enable triggering errors in SNMP on a port
choice
prompt "Profile"
default PORT15_INST01_PROFILE_WR
config PORT15_INST01_PROFILE_PTP bool "PTP"
config PORT15_INST01_PROFILE_WR
bool "White Rabbit"
config PORT15_INST01_PROFILE_CUSTOM
bool "Custom"
endchoice
choice
prompt "Desired state"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
default PORT15_INST01_DESIRADE_STATE_MASTER
config PORT15_INST01_DESIRADE_STATE_MASTER
bool "Master"
config PORT15_INST01_DESIRADE_STATE_SLAVE
bool "Slave"
config PORT15_INST01_DESIRADE_STATE_PASSIVE
bool "Passive"
endchoice
config PORT15_INST01_ASYMMETRY_CORRECTION_ENABLE
depends on !PORT15_INST01_PROFILE_HA && !PORT15_INST01_PROFILE_WR
bool "asymmetryCorrectionPortDS.enable"
default y
help
When supported, the value TRUE shall indicate that the mechanism of for the calculation
of the <delayAsymmetry> for certain media is enabled on the PTP port.
choice
prompt "BMCA mode"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
default PORT15_INST01_BMODE_MASTER_ONLY if TIME_GM || TIME_FM
default PORT15_INST01_BMODE_AUTO if TIME_BC
config PORT15_INST01_BMODE_MASTER_ONLY
bool "MasterOnly"
config PORT15_INST01_BMODE_AUTO
bool "Auto"
endchoice
config PORT15_INST01_EGRESS_LATENCY
int "timestampCorrectionPortDS.egressLatency (ps)"
default 226208
help
Defines the transmission constant delay (ps)
config PORT15_INST01_INGRESS_LATENCY
int "timestampCorrectionPortDS.ingressLatency (ps)"
default 229850
help
Defines the reception constant delay (ps)
config PORT15_INST01_ANNOUNCE_INTERVAL
int "logAnnounceInterval"
default 1
range 0 4
help
The mean time interval between transmissions of successive
Announce messages. The value is the logarithm to the base 2.
The configurable range shall be 0 to 4.
config PORT15_INST01_ANNOUNCE_RECEIPT_TIMEOUT
int "announceReceiptTimeout"
default 3
range 2 255
help
The announceReceiptTimeout specifies the number of announceIntervals
that must pass without receipt of an Announce message before the
occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 255
config PORT15_INST01_SYNC_INTERVAL
int "logSyncInterval"
default 0
range -1 1
help
The mean time interval between transmission of successive
Sync messages, i.e., the sync-interval, when transmitted
as multicast messages. The value is the logarithm to the base 2.
The configurable range shall be -1 to +1
config PORT15_INST01_MIN_DELAY_REQ_INTERVAL
depends on PORT15_INST01_MECHANISM_E2E
int "minDelayRequestInterval"
default 0
range 0 5
help
The minDelayRequestInterval specifies the minimum permitted
mean time interval between successive Delay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT15_INST01_MIN_PDELAY_REQ_INTERVAL
depends on PORT15_INST01_MECHANISM_P2P
int "minPDelayRequestInterval"
default 0
range 0 5
help
The minPDelayRequestInterval specifies the minimum permitted
mean time interval between successive Pdelay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT15_INST01_L1SYNC_ENABLED
depends on PORT15_INST01_PROFILE_CUSTOM
bool "L1SyncBasicPortDS.L1SyncEnabled"
default y
help
This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled
config PORT15_INST01_L1SYNC_INTERVAL
depends on PORT15_INST01_PROFILE_HA || (PORT15_INST01_PROFILE_CUSTOM && PORT15_INST01_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.logL1SyncInterval"
default 0
range -4 4
help
The L1Sync interval specifies the time interval
between successive periodic L1_SYNC TLV.
The value is the logarithm to the base 2.
The configurable range shall be -4 to 4
config PORT15_INST01_L1SYNC_RECEIPT_TIMEOUT
depends on PORT15_INST01_PROFILE_HA || (PORT15_INST01_PROFILE_CUSTOM && PORT15_INST01_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
default 3
range 2 10
help
The value of L1SyncReceiptTimeout specifies the number of elapsed
L1SyncIntervals that must pass without reception of the L1_SYNC TLV
before the L1_SYNC TLV reception timeout occurs.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 10
config PORT15_INST01_L1SYNC_TX_COHERENCY_IS_REQUIRED
depends on PORT15_INST01_PROFILE_CUSTOM && PORT15_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.txCoherencyIsRequired"
default y
help
The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to be a transmit coherent port.
config PORT15_INST01_L1SYNC_RX_COHERENCY_IS_REQUIRED
depends on PORT15_INST01_PROFILE_CUSTOM && PORT15_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
default y
help
The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a receive coherent port.
config PORT15_INST01_L1SYNC_CONGRUENCY_IS_REQUIRED
depends on PORT15_INST01_PROFILE_CUSTOM && PORT15_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.congruencyIsRequired"
default y
help
The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
be a congruent port
config PORT15_INST01_L1SYNC_OPT_PARAMS_ENABLED
depends on PORT15_INST01_PROFILE_CUSTOM && PORT15_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.optParamsEnabled"
default n
help
The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
TLV extends this TLV with the information about the optional parameters.
config PORT15_INST01_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
depends on PORT15_INST01_L1SYNC_OPT_PARAMS_ENABLED="y"
bool "L1SyncBasicPortDS.timestampsCorrectedTx"
default n
help
When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE,
the L1Sync port shall correct the transmitted egress timestamps with
the known value of the phase offset.
endmenu
menu "Instance 2"
depends on PORT15_INSTANCE_COUNT_2
choice
prompt "Network protocol"
default PORT15_INST02_PROTOCOL_RAW
config PORT15_INST02_PROTOCOL_RAW
bool "IEEE 802.3"
config PORT15_INST02_PROTOCOL_UDP_IPV4
bool "UDP/Ipv4"
endchoice
choice
prompt "Delay mechanism"
default PORT15_INST02_MECHANISM_E2E
config PORT15_INST02_MECHANISM_E2E
bool "End-to-end"
config PORT15_INST02_MECHANISM_P2P
bool "Peer-to-peer"
endchoice
config PORT15_INST02_MONITOR
bool "SNMP monitoring"
default y
help
Option to disable or enable triggering errors in SNMP on a port
choice
prompt "Profile"
default PORT15_INST02_PROFILE_WR
config PORT15_INST02_PROFILE_PTP bool "PTP"
config PORT15_INST02_PROFILE_WR
bool "White Rabbit"
config PORT15_INST02_PROFILE_CUSTOM
bool "Custom"
endchoice
choice
prompt "Desired state"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
default PORT15_INST02_DESIRADE_STATE_MASTER
config PORT15_INST02_DESIRADE_STATE_MASTER
bool "Master"
config PORT15_INST02_DESIRADE_STATE_SLAVE
bool "Slave"
config PORT15_INST02_DESIRADE_STATE_PASSIVE
bool "Passive"
endchoice
config PORT15_INST02_ASYMMETRY_CORRECTION_ENABLE
depends on !PORT15_INST02_PROFILE_HA && !PORT15_INST02_PROFILE_WR
bool "asymmetryCorrectionPortDS.enable"
default y
help
When supported, the value TRUE shall indicate that the mechanism of for the calculation
of the <delayAsymmetry> for certain media is enabled on the PTP port.
choice
prompt "BMCA mode"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
default PORT15_INST02_BMODE_MASTER_ONLY if TIME_GM || TIME_FM
default PORT15_INST02_BMODE_AUTO if TIME_BC
config PORT15_INST02_BMODE_MASTER_ONLY
bool "MasterOnly"
config PORT15_INST02_BMODE_AUTO
bool "Auto"
endchoice
config PORT15_INST02_EGRESS_LATENCY
int "timestampCorrectionPortDS.egressLatency (ps)"
default 226208
help
Defines the transmission constant delay (ps)
config PORT15_INST02_INGRESS_LATENCY
int "timestampCorrectionPortDS.ingressLatency (ps)"
default 229850
help
Defines the reception constant delay (ps)
config PORT15_INST02_ANNOUNCE_INTERVAL
int "logAnnounceInterval"
default 1
range 0 4
help
The mean time interval between transmissions of successive
Announce messages. The value is the logarithm to the base 2.
The configurable range shall be 0 to 4.
config PORT15_INST02_ANNOUNCE_RECEIPT_TIMEOUT
int "announceReceiptTimeout"
default 3
range 2 255
help
The announceReceiptTimeout specifies the number of announceIntervals
that must pass without receipt of an Announce message before the
occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 255
config PORT15_INST02_SYNC_INTERVAL
int "logSyncInterval"
default 0
range -1 1
help
The mean time interval between transmission of successive
Sync messages, i.e., the sync-interval, when transmitted
as multicast messages. The value is the logarithm to the base 2.
The configurable range shall be -1 to +1
config PORT15_INST02_MIN_DELAY_REQ_INTERVAL
depends on PORT15_INST02_MECHANISM_E2E
int "minDelayRequestInterval"
default 0
range 0 5
help
The minDelayRequestInterval specifies the minimum permitted
mean time interval between successive Delay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT15_INST02_MIN_PDELAY_REQ_INTERVAL
depends on PORT15_INST02_MECHANISM_P2P
int "minPDelayRequestInterval"
default 0
range 0 5
help
The minPDelayRequestInterval specifies the minimum permitted
mean time interval between successive Pdelay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT15_INST02_L1SYNC_ENABLED
depends on PORT15_INST02_PROFILE_CUSTOM
bool "L1SyncBasicPortDS.L1SyncEnabled"
default y
help
This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled
config PORT15_INST02_L1SYNC_INTERVAL
depends on PORT15_INST02_PROFILE_HA || (PORT15_INST02_PROFILE_CUSTOM && PORT15_INST02_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.logL1SyncInterval"
default 0
range -4 4
help
The L1Sync interval specifies the time interval
between successive periodic L1_SYNC TLV.
The value is the logarithm to the base 2.
The configurable range shall be -4 to 4
config PORT15_INST02_L1SYNC_RECEIPT_TIMEOUT
depends on PORT15_INST02_PROFILE_HA || (PORT15_INST02_PROFILE_CUSTOM && PORT15_INST02_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
default 3
range 2 10
help
The value of L1SyncReceiptTimeout specifies the number of elapsed
L1SyncIntervals that must pass without reception of the L1_SYNC TLV
before the L1_SYNC TLV reception timeout occurs.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 10
config PORT15_INST02_L1SYNC_TX_COHERENCY_IS_REQUIRED
depends on PORT15_INST02_PROFILE_CUSTOM && PORT15_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.txCoherencyIsRequired"
default y
help
The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to be a transmit coherent port.
config PORT15_INST02_L1SYNC_RX_COHERENCY_IS_REQUIRED
depends on PORT15_INST02_PROFILE_CUSTOM && PORT15_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
default y
help
The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a receive coherent port.
config PORT15_INST02_L1SYNC_CONGRUENCY_IS_REQUIRED
depends on PORT15_INST02_PROFILE_CUSTOM && PORT15_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.congruencyIsRequired"
default y
help
The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
be a congruent port
config PORT15_INST02_L1SYNC_OPT_PARAMS_ENABLED
depends on PORT15_INST02_PROFILE_CUSTOM && PORT15_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.optParamsEnabled"
default n
help
The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
TLV extends this TLV with the information about the optional parameters.
config PORT15_INST02_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
depends on PORT15_INST02_L1SYNC_OPT_PARAMS_ENABLED="y"
bool "L1SyncBasicPortDS.timestampsCorrectedTx"
default n
help
When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE,
the L1Sync port shall correct the transmitted egress timestamps with
the known value of the phase offset.
endmenu
endmenu
menu "PORT 16"
config PORT16_IFACE
string "Network interface"
default "wri16"
help
Used to set the physical port interface name: "wri[1-18]"
config PORT16_FIBER
int "Fiber type"
default 0
help
Used to set the type of fiber (number referring to the corresponding
FIBERXX_PARAMS)
config PORT16_CONSTANT_ASYMMETRY
int "asymmetryCorrectionPortDS.constantAsymmetry"
default 0
help
Used to set the constant delay asymmetry.
choice
prompt "Number of port instances"
default PORT16_INSTANCE_COUNT_1
config PORT16_INSTANCE_COUNT_0
bool "0"
config PORT16_INSTANCE_COUNT_1
bool "1"
config PORT16_INSTANCE_COUNT_2 bool "2"
endchoice
menu "Instance 1"
depends on PORT16_INSTANCE_COUNT_1 || PORT16_INSTANCE_COUNT_2
choice
prompt "Network protocol"
default PORT16_INST01_PROTOCOL_RAW
config PORT16_INST01_PROTOCOL_RAW
bool "IEEE 802.3"
config PORT16_INST01_PROTOCOL_UDP_IPV4
bool "UDP/Ipv4"
endchoice
choice
prompt "Delay mechanism"
default PORT16_INST01_MECHANISM_E2E
config PORT16_INST01_MECHANISM_E2E
bool "End-to-end"
config PORT16_INST01_MECHANISM_P2P
bool "Peer-to-peer"
endchoice
config PORT16_INST01_MONITOR
bool "SNMP monitoring"
default y
help
Option to disable or enable triggering errors in SNMP on a port
choice
prompt "Profile"
default PORT16_INST01_PROFILE_WR
config PORT16_INST01_PROFILE_PTP
bool "PTP"
config PORT16_INST01_PROFILE_WR
bool "White Rabbit"
config PORT16_INST01_PROFILE_CUSTOM
bool "Custom"
endchoice
choice
prompt "Desired state"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
default PORT16_INST01_DESIRADE_STATE_MASTER
config PORT16_INST01_DESIRADE_STATE_MASTER
bool "Master"
config PORT16_INST01_DESIRADE_STATE_SLAVE
bool "Slave"
config PORT16_INST01_DESIRADE_STATE_PASSIVE
bool "Passive"
endchoice
config PORT16_INST01_ASYMMETRY_CORRECTION_ENABLE
depends on !PORT16_INST01_PROFILE_HA && !PORT16_INST01_PROFILE_WR
bool "asymmetryCorrectionPortDS.enable"
default y
help
When supported, the value TRUE shall indicate that the mechanism of for the calculation
of the <delayAsymmetry> for certain media is enabled on the PTP port.
choice
prompt "BMCA mode"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
default PORT16_INST01_BMODE_MASTER_ONLY if TIME_GM || TIME_FM
default PORT16_INST01_BMODE_AUTO if TIME_BC
config PORT16_INST01_BMODE_MASTER_ONLY
bool "MasterOnly"
config PORT16_INST01_BMODE_AUTO
bool "Auto"endchoice
config PORT16_INST01_EGRESS_LATENCY
int "timestampCorrectionPortDS.egressLatency (ps)"
default 226393
help
Defines the transmission constant delay (ps)
config PORT16_INST01_INGRESS_LATENCY
int "timestampCorrectionPortDS.ingressLatency (ps)"
default 229907
help
Defines the reception constant delay (ps)
config PORT16_INST01_ANNOUNCE_INTERVAL
int "logAnnounceInterval"
default 1
range 0 4
help
The mean time interval between transmissions of successive
Announce messages. The value is the logarithm to the base 2.
The configurable range shall be 0 to 4.
config PORT16_INST01_ANNOUNCE_RECEIPT_TIMEOUT
int "announceReceiptTimeout"
default 3
range 2 255
help
The announceReceiptTimeout specifies the number of announceIntervals
that must pass without receipt of an Announce message before the
occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 255
config PORT16_INST01_SYNC_INTERVAL
int "logSyncInterval"
default 0
range -1 1
help
The mean time interval between transmission of successive
Sync messages, i.e., the sync-interval, when transmitted
as multicast messages. The value is the logarithm to the base 2.
The configurable range shall be -1 to +1
config PORT16_INST01_MIN_DELAY_REQ_INTERVAL
depends on PORT16_INST01_MECHANISM_E2E
int "minDelayRequestInterval"
default 0
range 0 5
help
The minDelayRequestInterval specifies the minimum permitted
mean time interval between successive Delay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT16_INST01_MIN_PDELAY_REQ_INTERVAL
depends on PORT16_INST01_MECHANISM_P2P
int "minPDelayRequestInterval"
default 0
range 0 5
help
The minPDelayRequestInterval specifies the minimum permitted
mean time interval between successive Pdelay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT16_INST01_L1SYNC_ENABLED
depends on PORT16_INST01_PROFILE_CUSTOM
bool "L1SyncBasicPortDS.L1SyncEnabled"
default y help
This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled
config PORT16_INST01_L1SYNC_INTERVAL
depends on PORT16_INST01_PROFILE_HA || (PORT16_INST01_PROFILE_CUSTOM && PORT16_INST01_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.logL1SyncInterval"
default 0
range -4 4
help
The L1Sync interval specifies the time interval
between successive periodic L1_SYNC TLV.
The value is the logarithm to the base 2.
The configurable range shall be -4 to 4
config PORT16_INST01_L1SYNC_RECEIPT_TIMEOUT
depends on PORT16_INST01_PROFILE_HA || (PORT16_INST01_PROFILE_CUSTOM && PORT16_INST01_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
default 3
range 2 10
help
The value of L1SyncReceiptTimeout specifies the number of elapsed
L1SyncIntervals that must pass without reception of the L1_SYNC TLV
before the L1_SYNC TLV reception timeout occurs.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 10
config PORT16_INST01_L1SYNC_TX_COHERENCY_IS_REQUIRED
depends on PORT16_INST01_PROFILE_CUSTOM && PORT16_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.txCoherencyIsRequired"
default y
help
The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a transmit coherent port.
config PORT16_INST01_L1SYNC_RX_COHERENCY_IS_REQUIRED
depends on PORT16_INST01_PROFILE_CUSTOM && PORT16_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
default y
help
The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a receive coherent port.
config PORT16_INST01_L1SYNC_CONGRUENCY_IS_REQUIRED
depends on PORT16_INST01_PROFILE_CUSTOM && PORT16_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.congruencyIsRequired"
default y
help
The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
be a congruent port
config PORT16_INST01_L1SYNC_OPT_PARAMS_ENABLED
depends on PORT16_INST01_PROFILE_CUSTOM && PORT16_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.optParamsEnabled"
default n
help
The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
TLV extends this TLV with the information about the optional parameters.
config PORT16_INST01_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
depends on PORT16_INST01_L1SYNC_OPT_PARAMS_ENABLED="y"
bool "L1SyncBasicPortDS.timestampsCorrectedTx"
default n
help
When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE,
the L1Sync port shall correct the transmitted egress timestamps with
the known value of the phase offset.
endmenu
menu "Instance 2"
depends on PORT16_INSTANCE_COUNT_2
choice
prompt "Network protocol"
default PORT16_INST02_PROTOCOL_RAW
config PORT16_INST02_PROTOCOL_RAW
bool "IEEE 802.3"
config PORT16_INST02_PROTOCOL_UDP_IPV4
bool "UDP/Ipv4"
endchoice
choice
prompt "Delay mechanism"
default PORT16_INST02_MECHANISM_E2E
config PORT16_INST02_MECHANISM_E2E
bool "End-to-end"
config PORT16_INST02_MECHANISM_P2P
bool "Peer-to-peer"
endchoice
config PORT16_INST02_MONITOR
bool "SNMP monitoring"
default y
help
Option to disable or enable triggering errors in SNMP on a port
choice
prompt "Profile"
default PORT16_INST02_PROFILE_WR
config PORT16_INST02_PROFILE_PTP
bool "PTP"
config PORT16_INST02_PROFILE_WR
bool "White Rabbit"
config PORT16_INST02_PROFILE_CUSTOM
bool "Custom"
endchoice
choice
prompt "Desired state"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
default PORT16_INST02_DESIRADE_STATE_MASTER
config PORT16_INST02_DESIRADE_STATE_MASTER
bool "Master"
config PORT16_INST02_DESIRADE_STATE_SLAVE
bool "Slave"
config PORT16_INST02_DESIRADE_STATE_PASSIVE
bool "Passive"
endchoice
config PORT16_INST02_ASYMMETRY_CORRECTION_ENABLE
depends on !PORT16_INST02_PROFILE_HA && !PORT16_INST02_PROFILE_WR
bool "asymmetryCorrectionPortDS.enable"
default y
help
When supported, the value TRUE shall indicate that the mechanism of for the calculation
of the <delayAsymmetry> for certain media is enabled on the PTP port.
choice
prompt "BMCA mode"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
default PORT16_INST02_BMODE_MASTER_ONLY if TIME_GM || TIME_FM
default PORT16_INST02_BMODE_AUTO if TIME_BC
config PORT16_INST02_BMODE_MASTER_ONLY
bool "MasterOnly"
config PORT16_INST02_BMODE_AUTO
bool "Auto"endchoice
config PORT16_INST02_EGRESS_LATENCY
int "timestampCorrectionPortDS.egressLatency (ps)"
default 226393
help
Defines the transmission constant delay (ps)
config PORT16_INST02_INGRESS_LATENCY
int "timestampCorrectionPortDS.ingressLatency (ps)"
default 229907
help
Defines the reception constant delay (ps)
config PORT16_INST02_ANNOUNCE_INTERVAL
int "logAnnounceInterval"
default 1
range 0 4
help
The mean time interval between transmissions of successive
Announce messages. The value is the logarithm to the base 2.
The configurable range shall be 0 to 4.
config PORT16_INST02_ANNOUNCE_RECEIPT_TIMEOUT
int "announceReceiptTimeout"
default 3
range 2 255
help
The announceReceiptTimeout specifies the number of announceIntervals
that must pass without receipt of an Announce message before the
occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 255
config PORT16_INST02_SYNC_INTERVAL
int "logSyncInterval"
default 0
range -1 1
help
The mean time interval between transmission of successive
Sync messages, i.e., the sync-interval, when transmitted
as multicast messages. The value is the logarithm to the base 2.
The configurable range shall be -1 to +1
config PORT16_INST02_MIN_DELAY_REQ_INTERVAL
depends on PORT16_INST02_MECHANISM_E2E
int "minDelayRequestInterval"
default 0
range 0 5
help
The minDelayRequestInterval specifies the minimum permitted
mean time interval between successive Delay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT16_INST02_MIN_PDELAY_REQ_INTERVAL
depends on PORT16_INST02_MECHANISM_P2P
int "minPDelayRequestInterval"
default 0
range 0 5
help
The minPDelayRequestInterval specifies the minimum permitted
mean time interval between successive Pdelay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT16_INST02_L1SYNC_ENABLED
depends on PORT16_INST02_PROFILE_CUSTOM
bool "L1SyncBasicPortDS.L1SyncEnabled"
default y help
This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled
config PORT16_INST02_L1SYNC_INTERVAL
depends on PORT16_INST02_PROFILE_HA || (PORT16_INST02_PROFILE_CUSTOM && PORT16_INST02_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.logL1SyncInterval"
default 0
range -4 4
help
The L1Sync interval specifies the time interval
between successive periodic L1_SYNC TLV.
The value is the logarithm to the base 2.
The configurable range shall be -4 to 4
config PORT16_INST02_L1SYNC_RECEIPT_TIMEOUT
depends on PORT16_INST02_PROFILE_HA || (PORT16_INST02_PROFILE_CUSTOM && PORT16_INST02_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
default 3
range 2 10
help
The value of L1SyncReceiptTimeout specifies the number of elapsed
L1SyncIntervals that must pass without reception of the L1_SYNC TLV
before the L1_SYNC TLV reception timeout occurs.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 10
config PORT16_INST02_L1SYNC_TX_COHERENCY_IS_REQUIRED
depends on PORT16_INST02_PROFILE_CUSTOM && PORT16_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.txCoherencyIsRequired"
default y
help
The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a transmit coherent port.
config PORT16_INST02_L1SYNC_RX_COHERENCY_IS_REQUIRED
depends on PORT16_INST02_PROFILE_CUSTOM && PORT16_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
default y
help
The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a receive coherent port.
config PORT16_INST02_L1SYNC_CONGRUENCY_IS_REQUIRED
depends on PORT16_INST02_PROFILE_CUSTOM && PORT16_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.congruencyIsRequired"
default y
help
The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
be a congruent port
config PORT16_INST02_L1SYNC_OPT_PARAMS_ENABLED
depends on PORT16_INST02_PROFILE_CUSTOM && PORT16_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.optParamsEnabled"
default n
help
The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
TLV extends this TLV with the information about the optional parameters.
config PORT16_INST02_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
depends on PORT16_INST02_L1SYNC_OPT_PARAMS_ENABLED="y"
bool "L1SyncBasicPortDS.timestampsCorrectedTx"
default n
help
When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE,
the L1Sync port shall correct the transmitted egress timestamps with
the known value of the phase offset.
endmenu
endmenu
menu "PORT 17"
config PORT17_IFACE
string "Network interface"
default "wri17"
help
Used to set the physical port interface name: "wri[1-18]"
config PORT17_FIBER
int "Fiber type"
default 0
help
Used to set the type of fiber (number referring to the corresponding
FIBERXX_PARAMS)
config PORT17_CONSTANT_ASYMMETRY
int "asymmetryCorrectionPortDS.constantAsymmetry"
default 0
help
Used to set the constant delay asymmetry.
choice
prompt "Number of port instances"
default PORT17_INSTANCE_COUNT_1
config PORT17_INSTANCE_COUNT_0
bool "0"
config PORT17_INSTANCE_COUNT_1
bool "1"
config PORT17_INSTANCE_COUNT_2
bool "2"
endchoice
menu "Instance 1"
depends on PORT17_INSTANCE_COUNT_1 || PORT17_INSTANCE_COUNT_2
choice
prompt "Network protocol"
default PORT17_INST01_PROTOCOL_RAW
config PORT17_INST01_PROTOCOL_RAW
bool "IEEE 802.3"
config PORT17_INST01_PROTOCOL_UDP_IPV4
bool "UDP/Ipv4"
endchoice
choice
prompt "Delay mechanism"
default PORT17_INST01_MECHANISM_E2E
config PORT17_INST01_MECHANISM_E2E
bool "End-to-end"
config PORT17_INST01_MECHANISM_P2P
bool "Peer-to-peer"
endchoice
config PORT17_INST01_MONITOR
bool "SNMP monitoring"
default y
help
Option to disable or enable triggering errors in SNMP on a port
choice
prompt "Profile"
default PORT17_INST01_PROFILE_WR
config PORT17_INST01_PROFILE_PTP
bool "PTP"
config PORT17_INST01_PROFILE_WR bool "White Rabbit"
config PORT17_INST01_PROFILE_CUSTOM
bool "Custom"
endchoice
choice
prompt "Desired state"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
default PORT17_INST01_DESIRADE_STATE_MASTER
config PORT17_INST01_DESIRADE_STATE_MASTER
bool "Master"
config PORT17_INST01_DESIRADE_STATE_SLAVE
bool "Slave"
config PORT17_INST01_DESIRADE_STATE_PASSIVE
bool "Passive"
endchoice
config PORT17_INST01_ASYMMETRY_CORRECTION_ENABLE
depends on !PORT17_INST01_PROFILE_HA && !PORT17_INST01_PROFILE_WR
bool "asymmetryCorrectionPortDS.enable"
default y
help
When supported, the value TRUE shall indicate that the mechanism of for the calculation
of the <delayAsymmetry> for certain media is enabled on the PTP port.
choice
prompt "BMCA mode"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
default PORT17_INST01_BMODE_MASTER_ONLY if TIME_GM || TIME_FM
default PORT17_INST01_BMODE_AUTO if TIME_BC
config PORT17_INST01_BMODE_MASTER_ONLY
bool "MasterOnly"
config PORT17_INST01_BMODE_AUTO
bool "Auto"
endchoice
config PORT17_INST01_EGRESS_LATENCY
int "timestampCorrectionPortDS.egressLatency (ps)"
default 226594
help
Defines the transmission constant delay (ps)
config PORT17_INST01_INGRESS_LATENCY
int "timestampCorrectionPortDS.ingressLatency (ps)"
default 230106
help
Defines the reception constant delay (ps)
config PORT17_INST01_ANNOUNCE_INTERVAL
int "logAnnounceInterval"
default 1
range 0 4
help
The mean time interval between transmissions of successive
Announce messages. The value is the logarithm to the base 2.
The configurable range shall be 0 to 4.
config PORT17_INST01_ANNOUNCE_RECEIPT_TIMEOUT
int "announceReceiptTimeout"
default 3
range 2 255
help
The announceReceiptTimeout specifies the number of announceIntervals
that must pass without receipt of an Announce message before the
occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 255
config PORT17_INST01_SYNC_INTERVAL
int "logSyncInterval" default 0
range -1 1
help
The mean time interval between transmission of successive
Sync messages, i.e., the sync-interval, when transmitted
as multicast messages. The value is the logarithm to the base 2.
The configurable range shall be -1 to +1
config PORT17_INST01_MIN_DELAY_REQ_INTERVAL
depends on PORT17_INST01_MECHANISM_E2E
int "minDelayRequestInterval"
default 0
range 0 5
help
The minDelayRequestInterval specifies the minimum permitted
mean time interval between successive Delay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT17_INST01_MIN_PDELAY_REQ_INTERVAL
depends on PORT17_INST01_MECHANISM_P2P
int "minPDelayRequestInterval"
default 0
range 0 5
help
The minPDelayRequestInterval specifies the minimum permitted
mean time interval between successive Pdelay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT17_INST01_L1SYNC_ENABLED
depends on PORT17_INST01_PROFILE_CUSTOM
bool "L1SyncBasicPortDS.L1SyncEnabled"
default y
help
This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled
config PORT17_INST01_L1SYNC_INTERVAL
depends on PORT17_INST01_PROFILE_HA || (PORT17_INST01_PROFILE_CUSTOM && PORT17_INST01_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.logL1SyncInterval"
default 0
range -4 4
help
The L1Sync interval specifies the time interval
between successive periodic L1_SYNC TLV.
The value is the logarithm to the base 2.
The configurable range shall be -4 to 4
config PORT17_INST01_L1SYNC_RECEIPT_TIMEOUT
depends on PORT17_INST01_PROFILE_HA || (PORT17_INST01_PROFILE_CUSTOM && PORT17_INST01_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
default 3
range 2 10
help
The value of L1SyncReceiptTimeout specifies the number of elapsed
L1SyncIntervals that must pass without reception of the L1_SYNC TLV
before the L1_SYNC TLV reception timeout occurs.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 10
config PORT17_INST01_L1SYNC_TX_COHERENCY_IS_REQUIRED
depends on PORT17_INST01_PROFILE_CUSTOM && PORT17_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.txCoherencyIsRequired"
default y
help
The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a transmit coherent port.
config PORT17_INST01_L1SYNC_RX_COHERENCY_IS_REQUIRED
depends on PORT17_INST01_PROFILE_CUSTOM && PORT17_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
default y
help
The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a receive coherent port.
config PORT17_INST01_L1SYNC_CONGRUENCY_IS_REQUIRED
depends on PORT17_INST01_PROFILE_CUSTOM && PORT17_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.congruencyIsRequired"
default y
help
The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
be a congruent port
config PORT17_INST01_L1SYNC_OPT_PARAMS_ENABLED
depends on PORT17_INST01_PROFILE_CUSTOM && PORT17_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.optParamsEnabled"
default n
help
The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
TLV extends this TLV with the information about the optional parameters.
config PORT17_INST01_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
depends on PORT17_INST01_L1SYNC_OPT_PARAMS_ENABLED="y"
bool "L1SyncBasicPortDS.timestampsCorrectedTx"
default n
help
When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE,
the L1Sync port shall correct the transmitted egress timestamps with
the known value of the phase offset.
endmenu
menu "Instance 2"
depends on PORT17_INSTANCE_COUNT_2
choice
prompt "Network protocol"
default PORT17_INST02_PROTOCOL_RAW
config PORT17_INST02_PROTOCOL_RAW
bool "IEEE 802.3"
config PORT17_INST02_PROTOCOL_UDP_IPV4
bool "UDP/Ipv4"
endchoice
choice
prompt "Delay mechanism"
default PORT17_INST02_MECHANISM_E2E
config PORT17_INST02_MECHANISM_E2E
bool "End-to-end"
config PORT17_INST02_MECHANISM_P2P
bool "Peer-to-peer"
endchoice
config PORT17_INST02_MONITOR
bool "SNMP monitoring"
default y
help
Option to disable or enable triggering errors in SNMP on a port
choice
prompt "Profile"
default PORT17_INST02_PROFILE_WR
config PORT17_INST02_PROFILE_PTP
bool "PTP"
config PORT17_INST02_PROFILE_WR bool "White Rabbit"
config PORT17_INST02_PROFILE_CUSTOM
bool "Custom"
endchoice
choice
prompt "Desired state"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
default PORT17_INST02_DESIRADE_STATE_MASTER
config PORT17_INST02_DESIRADE_STATE_MASTER
bool "Master"
config PORT17_INST02_DESIRADE_STATE_SLAVE
bool "Slave"
config PORT17_INST02_DESIRADE_STATE_PASSIVE
bool "Passive"
endchoice
config PORT17_INST02_ASYMMETRY_CORRECTION_ENABLE
depends on !PORT17_INST02_PROFILE_HA && !PORT17_INST02_PROFILE_WR
bool "asymmetryCorrectionPortDS.enable"
default y
help
When supported, the value TRUE shall indicate that the mechanism of for the calculation
of the <delayAsymmetry> for certain media is enabled on the PTP port.
choice
prompt "BMCA mode"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
default PORT17_INST02_BMODE_MASTER_ONLY if TIME_GM || TIME_FM
default PORT17_INST02_BMODE_AUTO if TIME_BC
config PORT17_INST02_BMODE_MASTER_ONLY
bool "MasterOnly"
config PORT17_INST02_BMODE_AUTO
bool "Auto"
endchoice
config PORT17_INST02_EGRESS_LATENCY
int "timestampCorrectionPortDS.egressLatency (ps)"
default 226594
help
Defines the transmission constant delay (ps)
config PORT17_INST02_INGRESS_LATENCY
int "timestampCorrectionPortDS.ingressLatency (ps)"
default 230106
help
Defines the reception constant delay (ps)
config PORT17_INST02_ANNOUNCE_INTERVAL
int "logAnnounceInterval"
default 1
range 0 4
help
The mean time interval between transmissions of successive
Announce messages. The value is the logarithm to the base 2.
The configurable range shall be 0 to 4.
config PORT17_INST02_ANNOUNCE_RECEIPT_TIMEOUT
int "announceReceiptTimeout"
default 3
range 2 255
help
The announceReceiptTimeout specifies the number of announceIntervals
that must pass without receipt of an Announce message before the
occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 255
config PORT17_INST02_SYNC_INTERVAL
int "logSyncInterval" default 0
range -1 1
help
The mean time interval between transmission of successive
Sync messages, i.e., the sync-interval, when transmitted
as multicast messages. The value is the logarithm to the base 2.
The configurable range shall be -1 to +1
config PORT17_INST02_MIN_DELAY_REQ_INTERVAL
depends on PORT17_INST02_MECHANISM_E2E
int "minDelayRequestInterval"
default 0
range 0 5
help
The minDelayRequestInterval specifies the minimum permitted
mean time interval between successive Delay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT17_INST02_MIN_PDELAY_REQ_INTERVAL
depends on PORT17_INST02_MECHANISM_P2P
int "minPDelayRequestInterval"
default 0
range 0 5
help
The minPDelayRequestInterval specifies the minimum permitted
mean time interval between successive Pdelay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT17_INST02_L1SYNC_ENABLED
depends on PORT17_INST02_PROFILE_CUSTOM
bool "L1SyncBasicPortDS.L1SyncEnabled"
default y
help
This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled
config PORT17_INST02_L1SYNC_INTERVAL
depends on PORT17_INST02_PROFILE_HA || (PORT17_INST02_PROFILE_CUSTOM && PORT17_INST02_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.logL1SyncInterval"
default 0
range -4 4
help
The L1Sync interval specifies the time interval
between successive periodic L1_SYNC TLV.
The value is the logarithm to the base 2.
The configurable range shall be -4 to 4
config PORT17_INST02_L1SYNC_RECEIPT_TIMEOUT
depends on PORT17_INST02_PROFILE_HA || (PORT17_INST02_PROFILE_CUSTOM && PORT17_INST02_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
default 3
range 2 10
help
The value of L1SyncReceiptTimeout specifies the number of elapsed
L1SyncIntervals that must pass without reception of the L1_SYNC TLV
before the L1_SYNC TLV reception timeout occurs.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 10
config PORT17_INST02_L1SYNC_TX_COHERENCY_IS_REQUIRED
depends on PORT17_INST02_PROFILE_CUSTOM && PORT17_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.txCoherencyIsRequired"
default y
help
The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a transmit coherent port.
config PORT17_INST02_L1SYNC_RX_COHERENCY_IS_REQUIRED
depends on PORT17_INST02_PROFILE_CUSTOM && PORT17_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
default y
help
The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a receive coherent port.
config PORT17_INST02_L1SYNC_CONGRUENCY_IS_REQUIRED
depends on PORT17_INST02_PROFILE_CUSTOM && PORT17_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.congruencyIsRequired"
default y
help
The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
be a congruent port
config PORT17_INST02_L1SYNC_OPT_PARAMS_ENABLED
depends on PORT17_INST02_PROFILE_CUSTOM && PORT17_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.optParamsEnabled"
default n
help
The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
TLV extends this TLV with the information about the optional parameters.
config PORT17_INST02_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
depends on PORT17_INST02_L1SYNC_OPT_PARAMS_ENABLED="y"
bool "L1SyncBasicPortDS.timestampsCorrectedTx"
default n
help
When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE,
the L1Sync port shall correct the transmitted egress timestamps with
the known value of the phase offset.
endmenu
endmenu
menu "PORT 18"
config PORT18_IFACE
string "Network interface"
default "wri18"
help
Used to set the physical port interface name: "wri[1-18]"
config PORT18_FIBER
int "Fiber type"
default 0
help
Used to set the type of fiber (number referring to the corresponding
FIBERXX_PARAMS)
config PORT18_CONSTANT_ASYMMETRY
int "asymmetryCorrectionPortDS.constantAsymmetry"
default 0
help
Used to set the constant delay asymmetry.
choice
prompt "Number of port instances"
default PORT18_INSTANCE_COUNT_1
config PORT18_INSTANCE_COUNT_0
bool "0"
config PORT18_INSTANCE_COUNT_1
bool "1"
config PORT18_INSTANCE_COUNT_2
bool "2"
endchoice
menu "Instance 1"
depends on PORT18_INSTANCE_COUNT_1 || PORT18_INSTANCE_COUNT_2
choice
prompt "Network protocol"
default PORT18_INST01_PROTOCOL_RAW
config PORT18_INST01_PROTOCOL_RAW
bool "IEEE 802.3"
config PORT18_INST01_PROTOCOL_UDP_IPV4
bool "UDP/Ipv4"
endchoice
choice
prompt "Delay mechanism"
default PORT18_INST01_MECHANISM_E2E
config PORT18_INST01_MECHANISM_E2E
bool "End-to-end"
config PORT18_INST01_MECHANISM_P2P
bool "Peer-to-peer"
endchoice
config PORT18_INST01_MONITOR
bool "SNMP monitoring"
default y
help
Option to disable or enable triggering errors in SNMP on a port
choice
prompt "Profile"
default PORT18_INST01_PROFILE_WR
config PORT18_INST01_PROFILE_PTP
bool "PTP"
config PORT18_INST01_PROFILE_WR
bool "White Rabbit"
config PORT18_INST01_PROFILE_CUSTOM
bool "Custom"
endchoice
choice
prompt "Desired state"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
default PORT18_INST01_DESIRADE_STATE_MASTER
config PORT18_INST01_DESIRADE_STATE_MASTER
bool "Master"
config PORT18_INST01_DESIRADE_STATE_SLAVE
bool "Slave"
config PORT18_INST01_DESIRADE_STATE_PASSIVE
bool "Passive"
endchoice
config PORT18_INST01_ASYMMETRY_CORRECTION_ENABLE
depends on !PORT18_INST01_PROFILE_HA && !PORT18_INST01_PROFILE_WR
bool "asymmetryCorrectionPortDS.enable"
default y
help
When supported, the value TRUE shall indicate that the mechanism of for the calculation
of the <delayAsymmetry> for certain media is enabled on the PTP port.
choice
prompt "BMCA mode"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
default PORT18_INST01_BMODE_MASTER_ONLY if TIME_GM || TIME_FM
default PORT18_INST01_BMODE_AUTO if TIME_BC
config PORT18_INST01_BMODE_MASTER_ONLY
bool "MasterOnly"
config PORT18_INST01_BMODE_AUTO
bool "Auto"
endchoice
config PORT18_INST01_EGRESS_LATENCY
int "timestampCorrectionPortDS.egressLatency (ps)"
default 226737
help
Defines the transmission constant delay (ps)
config PORT18_INST01_INGRESS_LATENCY
int "timestampCorrectionPortDS.ingressLatency (ps)"
default 230273
help
Defines the reception constant delay (ps)
config PORT18_INST01_ANNOUNCE_INTERVAL
int "logAnnounceInterval"
default 1
range 0 4
help
The mean time interval between transmissions of successive
Announce messages. The value is the logarithm to the base 2.
The configurable range shall be 0 to 4.
config PORT18_INST01_ANNOUNCE_RECEIPT_TIMEOUT
int "announceReceiptTimeout"
default 3
range 2 255
help
The announceReceiptTimeout specifies the number of announceIntervals
that must pass without receipt of an Announce message before the
occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 255
config PORT18_INST01_SYNC_INTERVAL
int "logSyncInterval"
default 0
range -1 1
help
The mean time interval between transmission of successive
Sync messages, i.e., the sync-interval, when transmitted
as multicast messages. The value is the logarithm to the base 2.
The configurable range shall be -1 to +1
config PORT18_INST01_MIN_DELAY_REQ_INTERVAL
depends on PORT18_INST01_MECHANISM_E2E
int "minDelayRequestInterval"
default 0
range 0 5
help
The minDelayRequestInterval specifies the minimum permitted
mean time interval between successive Delay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT18_INST01_MIN_PDELAY_REQ_INTERVAL
depends on PORT18_INST01_MECHANISM_P2P
int "minPDelayRequestInterval"
default 0
range 0 5
help
The minPDelayRequestInterval specifies the minimum permitted
mean time interval between successive Pdelay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT18_INST01_L1SYNC_ENABLED
depends on PORT18_INST01_PROFILE_CUSTOM
bool "L1SyncBasicPortDS.L1SyncEnabled"
default y
help
This parameter specifies whether the L1Sync option is enabled on the PTP Port. If L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled
config PORT18_INST01_L1SYNC_INTERVAL
depends on PORT18_INST01_PROFILE_HA || (PORT18_INST01_PROFILE_CUSTOM && PORT18_INST01_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.logL1SyncInterval"
default 0
range -4 4
help
The L1Sync interval specifies the time interval
between successive periodic L1_SYNC TLV.
The value is the logarithm to the base 2.
The configurable range shall be -4 to 4
config PORT18_INST01_L1SYNC_RECEIPT_TIMEOUT
depends on PORT18_INST01_PROFILE_HA || (PORT18_INST01_PROFILE_CUSTOM && PORT18_INST01_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
default 3
range 2 10
help
The value of L1SyncReceiptTimeout specifies the number of elapsed
L1SyncIntervals that must pass without reception of the L1_SYNC TLV
before the L1_SYNC TLV reception timeout occurs.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 10
config PORT18_INST01_L1SYNC_TX_COHERENCY_IS_REQUIRED
depends on PORT18_INST01_PROFILE_CUSTOM && PORT18_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.txCoherencyIsRequired"
default y
help
The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a transmit coherent port.
config PORT18_INST01_L1SYNC_RX_COHERENCY_IS_REQUIRED
depends on PORT18_INST01_PROFILE_CUSTOM && PORT18_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
default y
help
The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a receive coherent port.
config PORT18_INST01_L1SYNC_CONGRUENCY_IS_REQUIRED
depends on PORT18_INST01_PROFILE_CUSTOM && PORT18_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.congruencyIsRequired"
default y
help
The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
be a congruent port
config PORT18_INST01_L1SYNC_OPT_PARAMS_ENABLED
depends on PORT18_INST01_PROFILE_CUSTOM && PORT18_INST01_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.optParamsEnabled"
default n
help
The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
TLV extends this TLV with the information about the optional parameters.
config PORT18_INST01_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
depends on PORT18_INST01_L1SYNC_OPT_PARAMS_ENABLED="y"
bool "L1SyncBasicPortDS.timestampsCorrectedTx"
default n
help
When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE,
the L1Sync port shall correct the transmitted egress timestamps with
the known value of the phase offset.
endmenu
menu "Instance 2"
depends on PORT18_INSTANCE_COUNT_2
choice
prompt "Network protocol"
default PORT18_INST02_PROTOCOL_RAW
config PORT18_INST02_PROTOCOL_RAW
bool "IEEE 802.3"
config PORT18_INST02_PROTOCOL_UDP_IPV4
bool "UDP/Ipv4"
endchoice
choice
prompt "Delay mechanism"
default PORT18_INST02_MECHANISM_E2E
config PORT18_INST02_MECHANISM_E2E
bool "End-to-end"
config PORT18_INST02_MECHANISM_P2P
bool "Peer-to-peer"
endchoice
config PORT18_INST02_MONITOR
bool "SNMP monitoring"
default y
help
Option to disable or enable triggering errors in SNMP on a port
choice
prompt "Profile"
default PORT18_INST02_PROFILE_WR
config PORT18_INST02_PROFILE_PTP
bool "PTP"
config PORT18_INST02_PROFILE_WR
bool "White Rabbit"
config PORT18_INST02_PROFILE_CUSTOM
bool "Custom"
endchoice
choice
prompt "Desired state"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
default PORT18_INST02_DESIRADE_STATE_MASTER
config PORT18_INST02_DESIRADE_STATE_MASTER
bool "Master"
config PORT18_INST02_DESIRADE_STATE_SLAVE
bool "Slave"
config PORT18_INST02_DESIRADE_STATE_PASSIVE
bool "Passive"
endchoice
config PORT18_INST02_ASYMMETRY_CORRECTION_ENABLE
depends on !PORT18_INST02_PROFILE_HA && !PORT18_INST02_PROFILE_WR
bool "asymmetryCorrectionPortDS.enable"
default y
help
When supported, the value TRUE shall indicate that the mechanism of for the calculation
of the <delayAsymmetry> for certain media is enabled on the PTP port.
choice
prompt "BMCA mode"
depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
default PORT18_INST02_BMODE_MASTER_ONLY if TIME_GM || TIME_FM
default PORT18_INST02_BMODE_AUTO if TIME_BC
config PORT18_INST02_BMODE_MASTER_ONLY
bool "MasterOnly"
config PORT18_INST02_BMODE_AUTO
bool "Auto"
endchoice
config PORT18_INST02_EGRESS_LATENCY
int "timestampCorrectionPortDS.egressLatency (ps)"
default 226737
help
Defines the transmission constant delay (ps)
config PORT18_INST02_INGRESS_LATENCY
int "timestampCorrectionPortDS.ingressLatency (ps)"
default 230273
help
Defines the reception constant delay (ps)
config PORT18_INST02_ANNOUNCE_INTERVAL
int "logAnnounceInterval"
default 1
range 0 4
help
The mean time interval between transmissions of successive
Announce messages. The value is the logarithm to the base 2.
The configurable range shall be 0 to 4.
config PORT18_INST02_ANNOUNCE_RECEIPT_TIMEOUT
int "announceReceiptTimeout"
default 3
range 2 255
help
The announceReceiptTimeout specifies the number of announceIntervals
that must pass without receipt of an Announce message before the
occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 255
config PORT18_INST02_SYNC_INTERVAL
int "logSyncInterval"
default 0
range -1 1
help
The mean time interval between transmission of successive
Sync messages, i.e., the sync-interval, when transmitted
as multicast messages. The value is the logarithm to the base 2.
The configurable range shall be -1 to +1
config PORT18_INST02_MIN_DELAY_REQ_INTERVAL
depends on PORT18_INST02_MECHANISM_E2E
int "minDelayRequestInterval"
default 0
range 0 5
help
The minDelayRequestInterval specifies the minimum permitted
mean time interval between successive Delay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT18_INST02_MIN_PDELAY_REQ_INTERVAL
depends on PORT18_INST02_MECHANISM_P2P
int "minPDelayRequestInterval"
default 0
range 0 5
help
The minPDelayRequestInterval specifies the minimum permitted
mean time interval between successive Pdelay_Req messages.
The value is the logarithm to the base 2.
The configurable range shall be 0 to 5
config PORT18_INST02_L1SYNC_ENABLED
depends on PORT18_INST02_PROFILE_CUSTOM
bool "L1SyncBasicPortDS.L1SyncEnabled"
default y
help
This parameter specifies whether the L1Sync option is enabled on the PTP Port. If L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled
config PORT18_INST02_L1SYNC_INTERVAL
depends on PORT18_INST02_PROFILE_HA || (PORT18_INST02_PROFILE_CUSTOM && PORT18_INST02_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.logL1SyncInterval"
default 0
range -4 4
help
The L1Sync interval specifies the time interval
between successive periodic L1_SYNC TLV.
The value is the logarithm to the base 2.
The configurable range shall be -4 to 4
config PORT18_INST02_L1SYNC_RECEIPT_TIMEOUT
depends on PORT18_INST02_PROFILE_HA || (PORT18_INST02_PROFILE_CUSTOM && PORT18_INST02_L1SYNC_ENABLED="y")
int "L1SyncBasicPortDS.L1SyncReceiptTimeout"
default 3
range 2 10
help
The value of L1SyncReceiptTimeout specifies the number of elapsed
L1SyncIntervals that must pass without reception of the L1_SYNC TLV
before the L1_SYNC TLV reception timeout occurs.
The value is the logarithm to the base 2.
The configurable range shall be 2 to 10
config PORT18_INST02_L1SYNC_TX_COHERENCY_IS_REQUIRED
depends on PORT18_INST02_PROFILE_CUSTOM && PORT18_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.txCoherencyIsRequired"
default y
help
The Boolean attribute txCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a transmit coherent port.
config PORT18_INST02_L1SYNC_RX_COHERENCY_IS_REQUIRED
depends on PORT18_INST02_PROFILE_CUSTOM && PORT18_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.rxCoherencyIsRequired"
default y
help
The Boolean attribute rxCoherentIsRequired specifies the configuration of the L1Sync port and the
expected configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is
required to be a receive coherent port.
config PORT18_INST02_L1SYNC_CONGRUENCY_IS_REQUIRED
depends on PORT18_INST02_PROFILE_CUSTOM && PORT18_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.congruencyIsRequired"
default y
help
The Boolean attribute congruentIsRequired specifies configuration of the L1Sync port and the expected
configuration of its peer L1Sync port. This configuration indicates whether the L1Sync port is required to
be a congruent port
config PORT18_INST02_L1SYNC_OPT_PARAMS_ENABLED
depends on PORT18_INST02_PROFILE_CUSTOM && PORT18_INST02_L1SYNC_ENABLED="y"
bool "L1SyncBasicPortDS.optParamsEnabled"
default n
help
The Boolean attribute optParamsEnabled specifies whether the L1Sync port transmitting the L1_SYNC
TLV extends this TLV with the information about the optional parameters.
config PORT18_INST02_L1SYNC_OPT_PARAMS_TS_CORRECTED_TX_ENABLED
depends on PORT18_INST02_L1SYNC_OPT_PARAMS_ENABLED="y"
bool "L1SyncBasicPortDS.timestampsCorrectedTx"
default n
help
When L1SyncOptParamsPortDS.timestampsCorrectedTx is TRUE,
the L1Sync port shall correct the transmitted egress timestamps with
the known value of the phase offset.
endmenu
endmenu
endmenu