i2c_sfp.c

/*
 * i2c_sfc.c
 * CERN 2012 Manohar Vanga
 */

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <errno.h>

#include <lua.h>
#include <lauxlib.h>
#include <lualib.h>

#include <pio.h>
#include <trace.h>

#include "i2c.h"
#include "i2c_sfp.h"
#include "i2c_bitbang.h"
#include "i2c_fpga_reg.h"

#include "libshw_i2c.h"

#define ARRAY_SIZE(a)                               \
  (sizeof(a) / sizeof(*(a)))

/* The rest of the buses are normal */
#define WR_SFP2_BUS	2
#define WR_SFP3_BUS	3
#define WR_SFP4_BUS	4
#define WR_SFP5_BUS	5
#define WR_SFP6_BUS	6
#define WR_SFP7_BUS	7
#define WR_SFP8_BUS	8
#define WR_SFP9_BUS	9
#define WR_SFP10_BUS	10
#define WR_SFP11_BUS	11
#define WR_SFP12_BUS	12
#define WR_SFP13_BUS	13
#define WR_SFP14_BUS	14
#define WR_SFP15_BUS	15
#define WR_SFP16_BUS	16
#define WR_SFP17_BUS	17


#define SFP_LED_SYNCED_MASK(t)	((t) ? (1 << 6) : (1 << 0))
#define SFP_LED_LINK_MASK(t)	((t) ? (1 << 4) : (1 << 1))
#define SFP_LED_WRMODE_MASK(t)	((t) ? (1 << 5) : (1 << 3))
#define SFP_TX_DISABLE_MASK(t)	((t) ? (1 << 7) : (1 << 2))

/*
 * We need these tables because the schematics are messed up
 * The first one is for figuring out the masks in the pca9548's
 * The second table is for the connections of the pca9554's
 */
uint32_t bus_masks[] = {
	[WR_SFP2_BUS] = 8,
	[WR_SFP3_BUS] = 9,
	[WR_SFP4_BUS] = 10,
	[WR_SFP5_BUS] = 11,
	[WR_SFP6_BUS] = 12,
	[WR_SFP7_BUS] = 13,
	[WR_SFP8_BUS] = 14,
	[WR_SFP9_BUS] = 15,
	[WR_SFP10_BUS] = 0,
	[WR_SFP11_BUS] = 1,
	[WR_SFP12_BUS] = 2,
	[WR_SFP13_BUS] = 3,
	[WR_SFP14_BUS] = 4,
	[WR_SFP15_BUS] = 5,
	[WR_SFP16_BUS] = 6,
	[WR_SFP17_BUS] = 7,
};

uint32_t pca9554_masks[] = {
	[WR_SFP2_BUS] = 14,
	[WR_SFP3_BUS] = 15,
	[WR_SFP4_BUS] = 12,
	[WR_SFP5_BUS] = 13,
	[WR_SFP6_BUS] = 10,
	[WR_SFP7_BUS] = 11,
	[WR_SFP8_BUS] = 8,
	[WR_SFP9_BUS] = 9,
	[WR_SFP10_BUS] = 6,
	[WR_SFP11_BUS] = 7,
	[WR_SFP12_BUS] = 4,
	[WR_SFP13_BUS] = 5,
	[WR_SFP14_BUS] = 2,
	[WR_SFP15_BUS] = 3,
	[WR_SFP16_BUS] = 0,
	[WR_SFP17_BUS] = 1,
};

/* The two FPGA i2c masters */
i2c_fpga_reg_t fpga_bus0_reg = {
	.base_address = FPGA_I2C0_ADDRESS,
	.prescaler = 500,
};

i2c_fpga_reg_t fpga_bus1_reg = {
	.base_address = FPGA_I2C1_ADDRESS,
	.prescaler = 500,
};

/* The Bit-Banged I2C bus connected to the PCA9548A Multiplexers. WORKS */
pio_pin_t wr_mux_scl = {
	.port = PIOB,
	.pin = 25,
	.mode = PIO_MODE_GPIO,
	.dir = PIO_OUT_0,
};
pio_pin_t wr_mux_sda = {
	.port = PIOB,
	.pin = 27,
	.mode = PIO_MODE_GPIO,
	.dir = PIO_OUT_0,
};
struct i2c_bitbang wr_mux_bus_reg = {
	.scl = &wr_mux_scl,
	.sda = &wr_mux_sda,
};

/* The Bit-Banged I2C bus connected to the SFP 0 (Link 0). WORKS */
pio_pin_t wr_link0_sda = {
	.port = PIOB,
	.pin = 23,
	.mode = PIO_MODE_GPIO,
	.dir = PIO_OUT_0,
};
pio_pin_t wr_link0_scl = {
	.port = PIOB,
	.pin = 26,
	.mode = PIO_MODE_GPIO,
	.dir = PIO_OUT_0,
};
struct i2c_bitbang wr_link0_reg = {
	.scl = &wr_link0_scl,
	.sda = &wr_link0_sda,
};

/* The Bit-Banged I2C bus connected to the SFP 1 (Link 1). WORKS */
pio_pin_t wr_link1_sda = {
	.port = PIOB,
	.pin = 22,
	.mode = PIO_MODE_GPIO,
	.dir = PIO_OUT_0,
};
pio_pin_t wr_link1_scl = {
	.port = PIOB,
	.pin = 21,
	.mode = PIO_MODE_GPIO,
	.dir = PIO_OUT_0,
};
struct i2c_bitbang wr_link1_reg = {
	.scl = &wr_link1_scl,
	.sda = &wr_link1_sda,
};

struct i2c_bus i2c_buses[] = {
	{
		.name = "fpga_bus0",
		.type = I2C_BUS_TYPE_FPGA_REG,
		.type_specific = &fpga_bus0_reg,
	}, {
		.name = "fpga_bus1",
		.type = I2C_BUS_TYPE_FPGA_REG,
		.type_specific = &fpga_bus1_reg,
	}, {
		.name = "wr_mux_bus",
		.type = I2C_TYPE_BITBANG,
		.type_specific = &wr_mux_bus_reg,
	}, {
		.name = "wr_sfp0_link0",
		.type = I2C_TYPE_BITBANG,
		.type_specific = &wr_link0_reg,
	}, {
		.name = "wr_sfp0_link1",
		.type = I2C_TYPE_BITBANG,
		.type_specific = &wr_link1_reg,
	},
};

int shw_sfp_buses_init(void)
{
	int i;

	TRACE(TRACE_INFO, "Initializing SFP I2C busses...");
	for (i = 0; i < ARRAY_SIZE(i2c_buses); i++) {
		if (i2c_init_bus(&i2c_buses[i]) < 0) {
			printf("init failed: %s\n", i2c_buses[i].name);
			return -1;
		}
//		printf("init: success: %s\n", i2c_buses[i].name);
	}
	return 0;
}

int shw_sfp_bus_scan(int num, uint8_t *dev_map)
{
	int i;
	int detect;

	if (num < 0 || num >= ARRAY_SIZE(i2c_buses))
		return -1;

	if (i2c_buses[num].err)
			return -1;

	detect  = i2c_scan(&i2c_buses[num], dev_map);
	printf("\ni2c_bus: %s: %d devices\n", i2c_buses[num].name, detect);
	for (i = 0; i < 128; i++)
		if (dev_map[i/8] & (1 << (i%8)))
			printf("device at: 0x%02X\n", i);

	return detect;
}

int shw_sfp_header_verify_base(struct shw_sfp_header *head)
{
	int i;
	uint32_t sum = 0;

	for (i = 0; i < 63; i++)
		sum += ((uint8_t *)head)[i];
	sum &= 0xff;

	return (sum == head->cc_base) ? 0 : -1;
}

int shw_sfp_header_verify_ext(struct shw_sfp_header *head)
{
	int i;
	uint32_t sum = 0;

	for (i = 64; i < 95; i++)
		sum += ((uint8_t *)head)[i];
	sum &= 0xff;

	return (sum == head->cc_ext) ? 0 : -1;
}

int shw_sfp_header_verify(struct shw_sfp_header *head)
{
	return (!shw_sfp_header_verify_base(head) &&
		!shw_sfp_header_verify_ext(head)) ? 0 : -1;
}

void shw_sfp_print_header(struct shw_sfp_header *head)
{
	int i;

	printf("Identifier: %02X\n", head->id);
	printf("Extended Identifier: %02X\n", head->ext_id);
	printf("Connector: %02X\n", head->connector);
	printf("Connector: %02X\n", head->connector);
	printf("Tranciever: %016llX\n", ((uint64_t *)head->transciever)[0]);
	printf("Encoding: %02x\n", head->encoding);
	printf("Nominal Bit Rate: %d Megabits/s\n", head->br_nom*100);
	printf("Length (9m): %dkm\n", head->length1);
	printf("Length (9m): %dm\n", head->length2*100);
	printf("Length (50m): %dm\n", head->length3*10);
	printf("Length (62.5m): %dm\n", head->length4*10);
	printf("Length (copper): %dm\n", head->length5);
	printf("Vendor Name: ");
	for (i = 0; i < 16; i++)
		printf("%c", head->vendor_name[i]);
	printf("\n");
	printf("Company ID: %02X%02X%02X\n", head->vendor_oui[0], head->vendor_oui[1], head->vendor_oui[2]);
	printf("Vendor Part Number: ");
	for (i = 0; i < 16; i++)
		printf("%c", head->vendor_pn[i]);
	printf("\n");
	printf("Vendor Revision: ");
	for (i = 0; i < 4; i++)
		printf("%c", head->vendor_rev[i]);
	printf("\n");
	printf("Options: %04X\n", ((uint16_t *)head->options)[0]);
	printf("Bitrate (MAX): %02X\n", head->br_max);
	printf("Bitrate (MIN): %02X\n", head->br_min);
	printf("Vendor Serial: ");
	for (i = 0; i < 16; i++)
		printf("%c", head->vendor_serial[i]);
	printf("\n");
	uint8_t *date = (uint8_t *)&head->date_code;
	printf("Date Code: ");
	for (i = 0; i < 8; i++)
		printf("%c", head->date_code[i]);
	printf("\n");
}

void shw_sfp_header_dump(struct shw_sfp_header *head)
{
	int i;
	uint8_t *dump = (uint8_t *)head;
	printf("Header Dump:");
	for (i = 0; i < sizeof(struct shw_sfp_header); i++) {
		if (i % 8 == 0)
			printf("\n");
		printf("%02X ", dump[i]);
	}
	printf("\n");

}

/* Get the SFP ID from the SFP number (0 to 17) */
inline int shw_sfp_id(int num)
{
	if (num > 17 || num < 0)
		return -1;
	return num;
}

int32_t shw_sfp_read(int num, uint32_t addr, int off, int len, uint8_t *buf)
{
	int id;
	uint8_t byte1, byte2;
	struct i2c_bus *bus;

	id = shw_sfp_id(num);
	if (id < 0)
		return -1;

	bus = &i2c_buses[WR_MUX_BUS];
	if (id == 0 || id == 1)
		bus = &i2c_buses[WR_SFP0_BUS + id];

	if (id > 1) {
		/* Set the mask in the PCA9548 */
		byte1 = (1 << bus_masks[id]) & 0xff;
		byte2 = ((1 << bus_masks[id]) >> 8) & 0xff;
		i2c_transfer(bus, 0x70, 1, 0, &byte1);
		i2c_transfer(bus, 0x71, 1, 0, &byte2);
	}

	/* Send the offset we want to read from */
	if (off >= 0)
		i2c_transfer(bus, addr, 1, 0, (uint8_t *)&off);
	/* Do the read */
	return i2c_transfer(bus, addr, 0, len, buf);
}

int32_t shw_sfp_write(int num, uint32_t addr, int off, int len, uint8_t *buf)
{
	int id;
	uint8_t byte1, byte2;
	struct i2c_bus *bus;

	id = shw_sfp_id(num);
	if (id < 0)
		return -1;
	bus = &i2c_buses[WR_MUX_BUS];
	if (id == 0 || id == 1)
		bus = &i2c_buses[WR_SFP0_BUS + id];

	if (id != 0 && id != 1) {
		/* Set the mask in the PCA9548 */
		byte1 = (1 << bus_masks[id]) & 0xff;
		byte2 = ((1 << bus_masks[id]) >> 8) & 0xff;
		i2c_transfer(bus, 0x70, 1, 0, &byte1);
		i2c_transfer(bus, 0x71, 1, 0, &byte2);
	}

	/* Send the offset we want to write to if requested */
	if (off >= 0)
		i2c_transfer(bus, addr, 1, 0, (uint8_t *)&off);
	/* Do the read */
	return i2c_transfer(bus, addr, len, 0, buf);
}

uint32_t shw_sfp_module_scan(void)
{
	int i;
	int ret;
	uint32_t mask = 0;
	uint8_t test;
	for (i = 0; i < 18; i++) {
		ret = shw_sfp_read(i, 0x50, 0x0, sizeof(test), &test);
		if (ret == I2C_DEV_NOT_FOUND)
			continue;
		mask |= (1 << i);
	}
	return mask;
}

void shw_sfp_gpio_init(void)
{
	int i;
	uint8_t addr = 0x20;
	uint8_t conf_output[] = {0x3, 0x0};
	uint8_t set_output[] = {0x1, 0x0};
	struct i2c_bus *bus = &i2c_buses[WR_FPGA_BUS0];

	/* configure the pins as outputs */
	i2c_transfer(bus, addr, 2, 0, conf_output); 
	i2c_transfer(bus, addr, 2, 0, set_output); 

	bus = &i2c_buses[WR_FPGA_BUS1];
	for (i = 0; i < 8; i++) {
		i2c_transfer(bus, addr + i, 2, 0, conf_output); 
		i2c_transfer(bus, addr + i, 2, 0, set_output); 
	}
	
	for(i=0; i<18;i++)
	{
		shw_sfp_set_led_synced(i, 1);
		shw_udelay(7000);
		shw_sfp_set_led_link(i, 1);
		shw_udelay(7000);
	}
	for(i=0; i<18;i++)
	{
		shw_sfp_set_led_synced(i, 0);
		shw_udelay(7000);
		shw_sfp_set_led_link(i, 0);
		shw_udelay(7000);
	}

	
}

void shw_sfp_gpio_set(int num, uint8_t state)
{
	int id;
	int top;
	struct i2c_bus *bus;
	uint8_t addr = 0x20;
	uint8_t send[2];
	uint8_t out = 0;
	uint8_t curr;

	id = shw_sfp_id(num);
	bus = &i2c_buses[WR_FPGA_BUS1];
	if (id < 2)
		bus = &i2c_buses[WR_FPGA_BUS0];

	if (id > 1) {
		addr += pca9554_masks[id]/2;
		top = pca9554_masks[id]%2;
	} else {
		top = id%2;
	}

	send[0] = 0x1;
	/* Read current state of pins */
	i2c_transfer(bus, addr, 1, 0, send); 
	i2c_transfer(bus, addr, 0, 1, &curr); 

	if (top)
		curr &= 0xf;
	else
		curr &= 0xf0;

	if (state & SFP_LED_LINK)
		curr |= SFP_LED_LINK_MASK(top);
	if (state & SFP_LED_WRMODE)
		curr |= SFP_LED_WRMODE_MASK(top);
	if (state & SFP_LED_SYNCED)
		curr |= SFP_LED_SYNCED_MASK(top);
	if (state & SFP_TX_DISABLE)
		curr |= SFP_TX_DISABLE_MASK(top);

	send[1] = curr;
	i2c_transfer(bus, addr, 2, 0, send); 
}

uint8_t shw_sfp_gpio_get(int num)
{
	int id;
	int top;
	struct i2c_bus *bus;
	uint8_t addr = 0x20;
	uint8_t send[2];
	uint8_t out = 0;
	uint8_t curr;

	id = shw_sfp_id(num);
	bus = &i2c_buses[WR_FPGA_BUS1];
	if (id < 2)
		bus = &i2c_buses[WR_FPGA_BUS0];

	if (id > 1) {
		addr += pca9554_masks[id]/2;
		top = pca9554_masks[id]%2;
	} else {
		top = id%2;
	}

	send[0] = 0x1;
	/* Read current state of pins */
	i2c_transfer(bus, addr, 1, 0, send); 
	i2c_transfer(bus, addr, 0, 1, &curr); 

	if (curr & SFP_LED_LINK_MASK(top))
		out |= SFP_LED_LINK;
	if (curr & SFP_LED_WRMODE_MASK(top))
		out |= SFP_LED_WRMODE;
	if (curr & SFP_LED_SYNCED_MASK(top))
		out |= SFP_LED_SYNCED;
	if (curr & SFP_TX_DISABLE_MASK(top))
		out |= SFP_TX_DISABLE;

	return out;
}

int shw_sfp_read_header(int num, struct shw_sfp_header *head)
{
	int ret;

	if (shw_sfp_id(num) < 0)
		return -1;

	ret = shw_sfp_module_scan();
	if (!(ret & (1 << num)))
		return -1;

	ret = shw_sfp_read(num, I2C_SFP_ADDRESS, 0x0, sizeof(struct shw_sfp_header),
		(uint8_t *)head);
	if (ret == I2C_DEV_NOT_FOUND)
		return -ENODEV;

	return 0;
}

int shw_sfp_read_verify_header(int num, struct shw_sfp_header *head)
{
	int ret;

	ret = shw_sfp_read_header(num, head);
	if (ret < 0)
		return ret;

	return shw_sfp_header_verify(head);
}

static struct shw_sfp_caldata *shw_sfp_cal_list = NULL;

int shw_sfp_read_db(char *filename)
{
	lua_State *L = luaL_newstate();
	struct shw_sfp_caldata *sfp;

	luaL_openlibs(L);

	if (luaL_loadfile(L, filename) || lua_pcall(L, 0, 0, 0)) {
		printf("cannot run configuration file: %s",
				lua_tostring(L, -1));
		return -1;
	}

	lua_getglobal(L, "sfpdb");
	if (!lua_istable(L, -1)) {
		printf("`sfpdb' should be a table\n");
		return -1;
	}
	lua_pushnil(L);
	while (lua_next(L, -2)) {
		if(!lua_istable(L, -1)) {
			lua_pop( L, 1 );
			continue;
		}
		int i = 0;
		const char *sfp_pn = 0;
		const char *sfp_vs = 0;
		int vals[2];
		double alpha;
		lua_pushnil(L);
		while (lua_next(L, -2)) {
			const char *key = lua_tostring(L, -2);
			if (strcmp(key, "part_num") == 0)
				sfp_pn = lua_tostring(L, -1);
			else if (strcmp(key, "part_serial") == 0)
				sfp_vs = lua_tostring(L, -1);
			else if (strcmp(key, "alpha") == 0)
				alpha = lua_tonumber(L, -1);
			else if (strcmp(key, "delta_tx") == 0)
				vals[0] = lua_tointeger(L, -1);
			else if (strcmp(key, "delta_rx") == 0)
				vals[1] = lua_tointeger(L, -1);
			lua_pop(L, 1);
		}
		lua_pop(L, 1);

		sfp = malloc(sizeof(struct shw_sfp_caldata));
		strcpy(sfp->part_num, sfp_pn);
		if (!sfp_vs || strcmp(sfp_vs, "") == 0) {
			sfp->vendor_serial[0] = 0;
			sfp->flags |= SFP_FLAG_CLASS_DATA;
		} else {
			strcpy(sfp->vendor_serial, sfp_vs);
			sfp->flags |= SFP_FLAG_DEVICE_DATA;
		}
		sfp->alpha = alpha;
		sfp->delta_tx = vals[0];
		sfp->delta_rx = vals[1];
		sfp->next = shw_sfp_cal_list;
		shw_sfp_cal_list = sfp;
	}
	lua_pop( L, 1 );
	lua_close(L);

	return 0;
}

struct shw_sfp_caldata *shw_sfp_get_cal_data(int num)
{
	uint32_t ret;
	struct shw_sfp_header head;
	struct shw_sfp_caldata *t;
	struct shw_sfp_caldata *other = NULL;

	ret = shw_sfp_module_scan();
	if (!(ret & (1 << num))) {
		printf("sfp not inserted into slot: %d\n", num);
		return NULL;
	}
	if (shw_sfp_read_header(num, &head) < 0) {
		printf("failed to read sfp header for slot %d\n", num);
		return NULL;
	}

	char *pn = (char *)head.vendor_pn;
	char *vs = (char *)head.vendor_serial;
	int i;
	for (i = 0; i < 16; i++) {
		if (pn[i] == 0x20)
			pn[i] = 0;
		if (vs[i] == 0x20)
			vs[i] = 0;
	}
	t = shw_sfp_cal_list;
	/* In the first pass, look for serial number */
	while (t) {
//		printf("search1 %s %s\n", t->part_num, t->vendor_serial);
		if (strcmp(pn, t->part_num) == 0 && strcmp(t->vendor_serial, "") == 0)
			other = t;
		else if (strcmp(pn, t->part_num) == 0 && strcmp(vs, t->vendor_serial) == 0)
			return t;
		t = t->next;
	}
	if (other)
		return other;
	return NULL;
}