Kconfig_port_timing.in

menu "Port Timing Configuration"
config PTP_OPT_EXT_PORT_CONFIG_ENABLED
	bool "externalPortConfigurationEnabled" 
	default true
	help
	  This option is used by the high accuracy profile to force the port state.
	  When set, BMCA is disabled.
	  For more details please refer to the IEEE 1588-20019 (clause 17.6.2)

config PTP_SLAVE_ONLY
	depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED="n" 
	bool "slaveOnly" 
	default false
	help
	  A slaveOnly Ordinary Clock utilizes the slaveOnly state machine
	  which does not enable transition to MASTER state.
	  For more details please refer to the IEEE 1588-20019 (clause 9.2.2.1)

menu "PORT 1"

config PORT01_IFACE
	string "Network interface"
	default "wri1"
	help
	  Used to set the physical port interface name: "wri[1-18]"

config PORT01_FIBER
	int  "Fiber type"
	default 0
	help
	  Used to set the type of fiber (number referring to the corresponding 
	  FIBERXX_PARAMS)

config PORT01_CONSTANT_ASYMMETRY
	int "asymmetryCorrectionPortDS.constantAsymmetry"
	default 0
	help
	   Used to set the constant delay asymmetry.

choice
	prompt "Number of port instances"
	default PORT01_INSTANCE_COUNT_1
	config PORT01_INSTANCE_COUNT_0
	  bool "0"
	config PORT01_INSTANCE_COUNT_1
	  bool "1"
	config PORT01_INSTANCE_COUNT_2
	  bool "2"
endchoice

menu "Instance 1"
	depends on PORT01_INSTANCE_COUNT_1 ||  PORT01_INSTANCE_COUNT_2  

choice
    prompt "Network protocol"
    default PORT01_INST01_PROTOCOL_RAW
    config PORT01_INST01_PROTOCOL_RAW
        bool "IEEE 802.3"
    config PORT01_INST01_PROTOCOL_UDP_IPV4
        bool "UDP/Ipv4"
endchoice

choice
    prompt "Delay mechanism"
    default PORT01_INST01_MECHANISM_E2E
    config PORT01_INST01_MECHANISM_E2E
        bool "End-to-end"
    config PORT01_INST01_MECHANISM_P2P
        bool "Peer-to-peer"
endchoice

config PORT01_INST01_MONITOR
	bool "SNMP monitoring"
	default y
	help
	  Option to disable or enable triggering errors in SNMP on a port

choice
    prompt "Profile"
    default PORT01_INST01_PROFILE_WR
    config PORT01_INST01_PROFILE_PTP
        bool "PTP"
    config PORT01_INST01_PROFILE_WR
        bool "White Rabbit"
    config PORT01_INST01_PROFILE_CUSTOM
        bool "Custom"
endchoice

choice
    prompt "Desired state"
    depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED
    default PORT01_INST01_DESIRADE_STATE_SLAVE if TIME_BC
    default PORT01_INST01_DESIRADE_STATE_MASTER
    config PORT01_INST01_DESIRADE_STATE_MASTER
        bool "Master"
    config PORT01_INST01_DESIRADE_STATE_SLAVE
        bool "Slave"
    config PORT01_INST01_DESIRADE_STATE_PASSIVE
        bool "Passive"
endchoice

config PORT01_INST01_ASYMMETRY_CORRECTION_ENABLE
	depends on PORT01_INST01_PROFILE_HA="n" 
    bool "asymmetryCorrectionPortDS.enable"
    default true
	help
	  When supported, the value TRUE shall indicate that the mechanism of for the calculation
	  of the <delayAsymmetry> for certain media is enabled on the PTP port.

choice
    prompt "BMCA mode"
    depends on PTP_OPT_EXT_PORT_CONFIG_ENABLED!=y
    default PORT01_INST01_BMODE_MASTER_ONLY if TIME_BC
    default PORT01_INST01_BMODE_AUTO
    config PORT01_INST01_BMODE_MASTER_ONLY
        bool "MasterOnly"
    config PORT01_INST01_BMODE_AUTO
        bool "Auto"
endchoice

config PORT01_INST01_EGRESS_LATENCY
    int "timestampCorrectionPortDS.egressLatency (ps)"
    default 223897
 help
	 Defines the transmission constant delay (ps)

config PORT01_INST01_INGRESS_LATENCY
    int "timestampCorrectionPortDS.ingressLatency (ps)"
    default 226273
 help
	 Defines the reception constant delay (ps)

config PORT01_INST01_ANNOUNCE_INTERVAL
	int "logAnnounceInterval" 
	default 1
	range 0 4
	help
	  The mean time interval between transmissions of successive
	  Announce messages. The value is the logarithm to the base 2.
	  The configurable range shall be 0 to 4.

config PORT01_INST01_ANNOUNCE_RECEIPT_TIMEOUT
	int "announceReceiptTimeout"
	default 3
	range 2 255
	help
	  The announceReceiptTimeout specifies the number of announceIntervals 
	  that must pass without receipt of an Announce message before the 
	  occurrence of the event ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 2 to 255

config PORT01_INST01_SYNC_INTERVAL
	int "logSyncInterval"
	default 0
	range -1 1
	help
	  The mean time interval between transmission of successive
	  Sync messages, i.e., the sync-interval, when transmitted
	  as multicast messages. The value is the logarithm to the base 2.
	  The configurable range shall be -1 to +1

config PORT01_INST01_MIN_DELAY_REQ_INTERVAL
	depends on PORT01_INST01_MECHANISM_E2E  
	int "minDelayRequestInterval"
	default 0
	range 0 5
	help
	  The minDelayRequestInterval specifies the minimum permitted
	  mean time interval between successive Delay_Req messages.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 0 to 5

config PORT01_INST01_MIN_PDELAY_REQ_INTERVAL
	depends on PORT01_INST01_MECHANISM_P2P  
	int "minPDelayRequestInterval"
	default 0
	range 0 5
	help
	  The minPDelayRequestInterval specifies the minimum permitted
	  mean time interval between successive Pdelay_Req messages.
	  The value is the logarithm to the base 2.
	  The configurable range shall be 0 to 5

config PORT01_INST01_L1SYNC_ENABLED
	depends on PORT01_INST01_PROFILE_CUSTOM  
	bool "L1SyncBasicPortDS.L1SyncEnabled"
	default y
	help
	  This parameter specifies whether the L1Sync option is enabled on the PTP Port. If
	  L1SyncEnabled is TRUE, then the L1Sync message exchange is supported and enabled

config PORT01_INST01_L1SYNC_INTERVAL
	depends on PORT01_INST01_PROFILE_HA || (PORT01_INST01_PROFILE_CUSTOM &&  PORT01_INST01_L1SYNC_ENABLED="y") 
	int "L1SyncBasicPortDS.logL1SyncInterval"
	default 0
	range -4 4
	help
	  The L1Sync interval specifies the time interval
	  between successive periodic L1_SYNC TLV.