Open
Milestone
v2.0
Unstarted Issues (open and unassigned)
1
Ongoing Issues (open and assigned)
0
Completed Issues (closed)
20
- Add relay on AC line driven from the backplane connector.
- Replace backplane connector for ACDC stage to Amphenol 51939-1064
- Connect PE from power entry socket to the backplane connector and front panel.
- Use IEC power entry with line filter
- replace TPS78633DCQ with TPS7A4533
- replace OPA2192 with OPA192?
- 5v-control: R103 value
- 5v-power: missing TVS at the output
- 12v-control: +5V power net is not powered
- 12v-power: R79 and R80 was decreased to 10k in Lalit's v1.1
- connectors: remove *deg* label, we don't use it
- connectors: pin D3 should be connected to GND (it's a presence detection pin)
- connectors: pin C2 should be left unconnected
- connectors: connect *swclk* from monimod to pin C1
- connectors: connect *swdio* from monimod to pin B1
- connectors: 12V sense signals are swapped
- connectors: rename *mm_shdn*
- connectors: remove *en* label, we don't use it in RaToPUS
- Missing licensing notes
- Copper layers thickness