sdbfs: <linux/sdb.h> from the SDB specification, version 1.0

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

sdbfs/include/linux/sdb.h

+/*
+ * This is version 1.0 of sdb.h, as included the specification v1.0
+ */
+#ifndef __SDB_H__
+#define __SDB_H__
+#include <stdint.h>
+
+/*
+ * All structures are 64 bytes long and are expected
+ * to live in an array, one for each interconnect.
+ * Most fields of the structures are shared among the
+ * various types, and most-specific fields are at the
+ * beginning (for alignment reasons, and to keep the
+ * magic number at the head of the interconnect record
+ */
+
+/* Product, 40 bytes at offset 24, 8-byte alignmed
+ *
+ * device_id is vendor-assigned; version is device-specific,
+ * date is hex (e.g 0x20120501), name is UTF-8, blank-filled
+ * and not terminated with a 0 byte.
+ */
+struct sdb_product {
+	uint64_t		vendor_id;	/* 0x18..0x1f */
+	uint32_t		device_id;	/* 0x20..0x23 */
+	uint32_t		version;	/* 0x24..0x27 */
+	uint32_t		date;		/* 0x28..0x2b */
+	uint8_t			name[19];	/* 0x2c..0x3e */
+	uint8_t			record_type;	/* 0x3f */
+};
+
+/*
+ * Component, 56 bytes at offset 8, 8-byte aligned 
+ *
+ * The address range is first to last, inclusive
+ * (for example 0x100000 - 0x10ffff)
+ */
+struct sdb_component {
+	uint64_t		addr_first;	/* 0x08..0x0f */
+	uint64_t		addr_last;	/* 0x10..0x17 */
+	struct sdb_product	product;	/* 0x18..0x3f */
+};
+
+/* Type of the SDB record */
+enum sdb_record_type {
+	sdb_type_interconnect = 0x00,
+	sdb_type_device       = 0x01,
+	sdb_type_bridge       = 0x02,
+	sdb_type_integration  = 0x80,
+	sdb_type_empty        = 0xFF,
+};
+
+/* Type 0: interconnect (first of the array)
+ *
+ * sdb_records is the length of the table including this first
+ *  record, version is 1. The bus type is enumerated later.
+ */
+#define				SDB_MAGIC 	0x5344422d /* "SDB-" */
+struct sdb_interconnect {
+	uint32_t		sdb_magic;	/* 0x00-0x03 */
+	uint16_t		sdb_records;	/* 0x04-0x05 */
+	uint8_t			sdb_version;	/* 0x06 */
+	uint8_t			sdb_bus_type;	/* 0x07 */
+	struct sdb_component	sdb_component;	/* 0x08-0x3f */
+};
+
+/* Type 1: device
+ *
+ * class is 0 for "custom device", other values are
+ * to be standardized; ABI version is for the driver,
+ * bus-specific bits are defined by each bus (see below)
+ */
+struct sdb_device {
+	uint16_t		abi_class;	/* 0x00-0x01 */
+	uint8_t			abi_ver_major;	/* 0x02 */
+	uint8_t			abi_ver_minor;	/* 0x03 */
+	uint32_t		bus_specific;	/* 0x04-0x07 */
+	struct sdb_component	sdb_component;	/* 0x08-0x3f */
+};
+
+/* Type 2: bridge
+ *
+ * child is the address of the nested SDB table
+ */
+struct sdb_bridge {
+	uint64_t		sdb_child;	/* 0x00-0x07 */
+	struct sdb_component	sdb_component;	/* 0x08-0x3f */
+};
+
+/* Type 0x80: integration
+ *
+ * all types with bit 7 set are meta-information, so
+ * software can ignore the types it doesn't know. Here we
+ * just provide product information for an aggregate device
+ */
+struct sdb_integration {
+	uint8_t			reserved[24];	/* 0x00-0x17 */
+	struct sdb_product	product;	/* 0x08-0x3f */
+};
+
+/* Type 0xff: empty
+ *
+ * this allows keeping empty slots during development,
+ * so they can be filled later with miminal efforts and
+ * no misleading description is ever shipped -- hopefully.
+ * It can also be used to pad a table to a desired length.
+ */
+struct sdb_empty {
+	uint8_t			reserved[63];	/* 0x00-0x3e */
+	uint8_t			record_type;	/* 0x3f */
+};
+
+/* The type of bus, for bus-specific flags (currently only Wishbone) */
+enum sdb_bus_type {
+	sdb_wishbone = 0x00
+};
+
+#define SDB_WB_WIDTH_MASK		0x0f
+#define SDB_WB_ACCESS8		0x01
+#define SDB_WB_ACCESS16		0x02
+#define SDB_WB_ACCESS32		0x04
+#define SDB_WB_ACCESS64		0x08
+
+#define SDB_WB_LITTLE_ENDIAN		0x80
+
+#endif /* __SDB_H__ */