Fixing code-rot caused by 1) Change to IPBus repository 2) Files needed to build firmware

firmware/config/ise14/sp601/setup_project.tcl

@@ -70,6 +70,7 @@ xfile add ipbus/firmware/example_designs/hdl/clock_div.vhd
 
 xfile add ipbus/firmware/slaves/hdl/ipbus_reg_types.vhd
 xfile add ipbus/firmware/slaves/hdl/ipbus_reg_v.vhd
+xfile add ipbus/firmware/slaves/hdl/ipbus_ctrlreg_v.vhd
 #xfile add ipbus/firmware/slaves/hdl/syncreg_r.vhd
 #xfile add ipbus/firmware/slaves/hdl/syncreg_w.vhd
 #xfile add ipbus/firmware/slaves/hdl/ipbus_syncreg_v.vhd
@@ -115,7 +116,7 @@ xfile add fmc-mtlu/firmware/hdl/common/ipbus_ver.vhd
 xfile add fmc-mtlu/firmware/hdl/common/logic_clocks_rtl.vhd
 #xfile add fmc-mtlu/firmware/hdl/common/pulseClockDomainCrossing_rtl.vhd
 #xfile add fmc-mtlu/firmware/hdl/common/Reg_2clks.vhd
-#xfile add fmc-mtlu/firmware/hdl/common/registerCounter_rtl.vhd
+xfile add fmc-mtlu/firmware/hdl/common/registerCounter_rtl.vhd
 xfile add fmc-mtlu/firmware/hdl/common/synchronizeRegisters_rtl.vhd
 # xfile add fmc-mtlu/firmware/hdl/common/serdes_1_to_n_SDR.vhd
 xfile add fmc-mtlu/firmware/hdl/common/serdesCalibrateFSM_rtl.vhd

firmware/config/ise14/sp605/setup_project.tcl

@@ -71,6 +71,7 @@ xfile add ipbus/firmware/slaves/hdl/ipbus_reg_types.vhd
 xfile add ipbus/firmware/slaves/hdl/syncreg_r.vhd
 xfile add ipbus/firmware/slaves/hdl/syncreg_w.vhd
 xfile add ipbus/firmware/slaves/hdl/ipbus_syncreg_v.vhd
+xfile add ipbus/firmware/slaves/hdl/ipbus_ctrlreg_v.vhd
 
 # Add Opencores files for i2c interface
 xfile add external/opencores_i2c/i2c_master_bit_ctrl.vhd

firmware/scripts/setup_workspace.sh

@@ -36,7 +36,7 @@ IPBusDir=`pwd`/IPBus2
 if [ ! -d "$IPBusDir" ]; then
     mkdir $IPBusDir
     pushd $IPBusDir
-    svn co http://svn.cern.ch/guest/cactus/tags/ipbus_2_0_v1/firmware
+    svn co http://svn.cern.ch/guest/cactus/tags/ipbus_fw/ipbus_2_0_v1/firmware
     echo "Checked out IPBus2 code"
     popd
 fi