Skip to content

A
AIDA-2020 TLU - Gateware
Commit 35f89bff authored by David Cussans's avatar David Cussans
Browse files
Options

Manual merge of scripted firmware build files from dgc_scripted_build_ipbus2 back into trunk. 

Also, a few PCB files updated when I tested cleaned up trunk 
by exporting schematic to pcb.
parent 1c3bdc36
Hide whitespace changes
Inline Side-by-side
Showing with 380 additions and 1232 deletions
config/ise14/sp601/build_bitstream.tcl 0 → 100644
View file @ 35f89bff
project open fmc-mtlu
puts "Regenerating cores"
cd $::env(FW_WORKSPACE)/workspace/ipcore_dir
catch {exec coregen -r -b tri_mode_eth_mac_v5_4.xco -p coregen.cgp}
catch {exec coregen -r -b mac_fifo_axi4.xco -p coregen.cgp}
catch {exec coregen -r -b tlu_event_fifo.xco -p coregen.cgp}
catch {exec coregen -r -b FIFO.xco -p coregen.cgp}
catch {exec coregen -r -b CounterUp.xco -p coregen.cgp}
catch {exec coregen -r -b internalTriggerGenerator.xco -p coregen.cgp}
process run "Synthesize"
process run "Translate"
process run "Map"
process run "Place & Route"
process run "Generate Programming File"
project close
config/ise14/sp601/setup_project.tcl
View file @ 35f89bff
project new single_cbc2_fmc
project new fmc-mtlu
project set family spartan6
project set device xc6slx16
project set package csg324
......@@ -17,17 +17,21 @@ project set "Enable BitStream Compression" TRUE -process "Generate Programming F
# IPBus Ethernet for gig_eth_pcs_pma_v11_5
xfile add ipbus/firmware/ethernet/hdl/eth_s6_gmii.vhd
xfile add ipbus/firmware/ethernet/hdl/emac_hostbus_decl.vhd
puts "Adding and Regenerating Ethernet cores"
# Add cores for Ethernet
exec cp ipbus/firmware/ethernet/coregen/tri_mode_eth_mac_v5_4.xco ipcore_dir
exec cp ipbus/firmware/ethernet/coregen/mac_fifo_axi4.xco ipcore_dir
xfile add ipcore_dir/tri_mode_eth_mac_v5_4.xco
xfile add ipcore_dir/mac_fifo_axi4.xco
cd ipcore_dir
catch {exec coregen -r -b tri_mode_eth_mac_v5_4.xco -p coregen.cgp}
catch {exec coregen -r -b mac_fifo_axi4.xco -p coregen.cgp}
cd ..
# Don't regenerate cores for now...
#cd ipcore_dir
#catch {exec coregen -r -b tri_mode_eth_mac_v5_4.xco -p coregen.cgp}
#catch {exec coregen -r -b mac_fifo_axi4.xco -p coregen.cgp}
#cd ..
puts "Adding IPBus files"
# Xilinx ISE setup fragment for ipbus core
xfile add ipbus/firmware/ipbus_core/hdl/ipbus_package.vhd
xfile add ipbus/firmware/ipbus_core/hdl/ipbus_trans_decl.vhd
......@@ -69,16 +73,63 @@ xfile add external/opencores_i2c/i2c_master_byte_ctrl.vhd
xfile add external/opencores_i2c/i2c_master_registers.vhd
xfile add external/opencores_i2c/i2c_master_top.vhd
# Add CBC2 files
xfile add cbc2/firmware/hdl/i2c_master_rtl.vhd
xfile add cbc2/firmware/hdl/slaves.vhd
xfile add cbc2/firmware/hdl/clocks_s6_extphy.vhd
xfile add cbc2/firmware/hdl/ipbus_addr_decode.vhd
xfile add cbc2/firmware/hdl/top_sp605_extphy.vhd
xfile add cbc2/firmware/hdl/cbc2_interface.vhd
xfile add cbc2/firmware/hdl/i2c_trig.vhd
# Add TLU cores....
# Add cores for Ethernet
puts "Adding and Regenerating TLU cores"
exec cp fmc-mtlu/firmware/ise/ipcore_dir/tlu_event_fifo.xco ipcore_dir
exec cp fmc-mtlu/firmware/ise/ipcore_dir/FIFO.xco ipcore_dir
exec cp fmc-mtlu/firmware/ise/ipcore_dir/CounterUp.xco ipcore_dir
exec cp fmc-mtlu/firmware/ise/ipcore_dir/internalTriggerGenerator.xco ipcore_dir
xfile add ipcore_dir/tlu_event_fifo.xco
xfile add ipcore_dir/FIFO.xco
xfile add ipcore_dir/CounterUp.xco
xfile add ipcore_dir/internalTriggerGenerator.xco
# Don't regenerate cores for now...
#cd ipcore_dir
#catch {exec coregen -r -b tlu_event_fifo.xco -p coregen.cgp}
#catch {exec coregen -r -b FIFO.xco -p coregen.cgp}
#catch {exec coregen -r -b CounterUp.xco -p coregen.cgp}
#catch {exec coregen -r -b internalTriggerGenerator.xco -p coregen.cgp}
#cd ..
puts "Adding TLU Files "
# Add FMC-MTLU files. First the hand-written VHDL
xfile add fmc-mtlu/firmware/hdl/common/dualSERDES_1to4_rtl.vhd
xfile add fmc-mtlu/firmware/hdl/common/DUTInterfaces_rtl.vhd
xfile add fmc-mtlu/firmware/hdl/common/eventBuffer_rtl.vhd
xfile add fmc-mtlu/firmware/hdl/common/eventFormatter_rtl.vhd
xfile add fmc-mtlu/firmware/hdl/common/i2c_master_rtl.vhd
xfile add fmc-mtlu/firmware/hdl/common/ipbus_addr_decode.vhd
xfile add fmc-mtlu/firmware/hdl/common/IPBusInterface_rtl.vhd
xfile add fmc-mtlu/firmware/hdl/common/ipbus_ver.vhd
xfile add fmc-mtlu/firmware/hdl/common/logic_clocks_rtl.vhd
xfile add fmc-mtlu/firmware/hdl/common/pulseClockDomainCrossing_rtl.vhd
xfile add fmc-mtlu/firmware/hdl/common/Reg_2clks.vhd
xfile add fmc-mtlu/firmware/hdl/common/registerCounter_rtl.vhd
xfile add fmc-mtlu/firmware/hdl/common/serdes_1_to_n_SDR.vhd
xfile add fmc-mtlu/firmware/hdl/common/sync_reg.vhd
xfile add fmc-mtlu/firmware/hdl/common/triggerInputs_rtl.vhd
xfile add fmc-mtlu/firmware/hdl/common/triggerLogic_rtl.vhd
xfile add fmc-mtlu/firmware/hdl/common/clocks_s6_extphy.vhd
xfile add fmc-mtlu/firmware/hdl/common/arrivalTimeLUT_rtl.vhd
xfile add fmc-mtlu/firmware/hdl/test/clock_divider_s6.v
# Then add the HDL-Designer generated files..
xfile add fmc-mtlu/firmware/hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/top_extphy_struct.vhd
xfile add fmc-mtlu/firmware/hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/fmcTLU_pkg_body.vhd
xfile add fmc-mtlu/firmware/hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/fmcTLU_pkg.vhd
# Add user constraints file
xfile add cbc2/firmware/ucf/sp601_extphy_pc045b_1hybrid.ucf
# UCF for TLU with FMC connector wrong way round.
#xfile add fmc-mtlu/firmware/ucf/sp601_FMC_mTLU.ucf
# bug-fixed TLU:
xfile add fmc-mtlu/firmware/ucf/sp601_FMC_mTLU_v1a.ucf
project close
puts "Successfully finished building project file"
config/ise14/sp605/build_bitstream.tcl 0 → 100644
View file @ 35f89bff
project open fmc-mtlu
puts "Regenerating cores"
cd $::env(FW_WORKSPACE)/workspace/ipcore_dir
catch {exec coregen -r -b tri_mode_eth_mac_v5_4.xco -p coregen.cgp}
catch {exec coregen -r -b mac_fifo_axi4.xco -p coregen.cgp}
catch {exec coregen -r -b tlu_event_fifo.xco -p coregen.cgp}
catch {exec coregen -r -b FIFO.xco -p coregen.cgp}
catch {exec coregen -r -b CounterUp.xco -p coregen.cgp}
catch {exec coregen -r -b internalTriggerGenerator.xco -p coregen.cgp}
process run "Synthesize"
process run "Translate"
process run "Map"
process run "Place & Route"
process run "Generate Programming File"
project close
config/ise14/sp605/coregen.cgp 0 → 100644
View file @ 35f89bff
SET busformat = BusFormatAngleBracketNotRipped
SET designentry = VHDL
SET device = xc6slx45t
SET devicefamily = spartan6
SET flowvendor = Foundation_ISE
SET package = fgg484
SET speedgrade = -3
SET verilogsim = true
SET vhdlsim = true
config/ise14/sp605/file_list 0 → 100644
View file @ 35f89bff
hdl ipbus/firmware/example_designs/hdl/clocks_s6_extphy.vhd
include ipbus/firmware/ethernet/cfg/file_list_s6_extphy
include ipbus/firmware/ipbus_core/cfg/file_list
config/ise14/sp605/setup_project.tcl 0 → 100644
View file @ 35f89bff
project new fmc-mtlu
project set family spartan6
project set device xc6slx45t
project set package fgg484
project set speed -3
project set "Enable Multi-Threading" "2" -process "Map"
project set "Pack I/O Registers/Latches into IOBs" "For Inputs and Outputs" -process "Map"
project set "Enable Multi-Threading" "2" -process "Place & Route"
project set "Enable BitStream Compression" TRUE -process "Generate Programming File"
# source $::env(REPOS_FW_DIR)/firmware/example_designs/scripts/addfiles.tcl
# Just list files by hand for now. Can't get addfiles.tcl to work.
#xfile add ipbus/firmware/example_designs/hdl/clocks_s6_extphy.vhd
# IPBus Ethernet for gig_eth_pcs_pma_v11_5
xfile add ipbus/firmware/ethernet/hdl/eth_s6_gmii.vhd
xfile add ipbus/firmware/ethernet/hdl/emac_hostbus_decl.vhd
puts "Adding and Regenerating Ethernet cores"
# Add cores for Ethernet
exec cp ipbus/firmware/ethernet/coregen/tri_mode_eth_mac_v5_4.xco ipcore_dir
exec cp ipbus/firmware/ethernet/coregen/mac_fifo_axi4.xco ipcore_dir
xfile add ipcore_dir/tri_mode_eth_mac_v5_4.xco
xfile add ipcore_dir/mac_fifo_axi4.xco
# Don't regenerate cores for now...
#cd ipcore_dir
#catch {exec coregen -r -b tri_mode_eth_mac_v5_4.xco -p coregen.cgp}
#catch {exec coregen -r -b mac_fifo_axi4.xco -p coregen.cgp}
#cd ..
puts "Adding IPBus files"
# Xilinx ISE setup fragment for ipbus core
xfile add ipbus/firmware/ipbus_core/hdl/ipbus_package.vhd
xfile add ipbus/firmware/ipbus_core/hdl/ipbus_trans_decl.vhd
xfile add ipbus/firmware/ipbus_core/hdl/ipbus_ctrl.vhd
xfile add ipbus/firmware/ipbus_core/hdl/udp_if_flat.vhd
xfile add ipbus/firmware/ipbus_core/hdl/udp_buffer_selector.vhd
xfile add ipbus/firmware/ipbus_core/hdl/udp_build_arp.vhd
xfile add ipbus/firmware/ipbus_core/hdl/udp_build_payload.vhd
xfile add ipbus/firmware/ipbus_core/hdl/udp_build_ping.vhd
xfile add ipbus/firmware/ipbus_core/hdl/udp_build_resend.vhd
xfile add ipbus/firmware/ipbus_core/hdl/udp_build_status.vhd
xfile add ipbus/firmware/ipbus_core/hdl/udp_byte_sum.vhd
xfile add ipbus/firmware/ipbus_core/hdl/udp_clock_crossing_if.vhd
xfile add ipbus/firmware/ipbus_core/hdl/udp_do_rx_reset.vhd
xfile add ipbus/firmware/ipbus_core/hdl/udp_dualportram.vhd
xfile add ipbus/firmware/ipbus_core/hdl/udp_dualportram_rx.vhd
xfile add ipbus/firmware/ipbus_core/hdl/udp_dualportram_tx.vhd
xfile add ipbus/firmware/ipbus_core/hdl/udp_ipaddr_block.vhd
xfile add ipbus/firmware/ipbus_core/hdl/udp_packet_parser.vhd
xfile add ipbus/firmware/ipbus_core/hdl/udp_rarp_block.vhd
xfile add ipbus/firmware/ipbus_core/hdl/udp_rxram_mux.vhd
xfile add ipbus/firmware/ipbus_core/hdl/udp_rxram_shim.vhd
xfile add ipbus/firmware/ipbus_core/hdl/udp_rxtransactor_if_simple.vhd
xfile add ipbus/firmware/ipbus_core/hdl/udp_status_buffer.vhd
xfile add ipbus/firmware/ipbus_core/hdl/udp_tx_mux.vhd
xfile add ipbus/firmware/ipbus_core/hdl/udp_txtransactor_if_simple.vhd
xfile add ipbus/firmware/ipbus_core/hdl/trans_arb.vhd
xfile add ipbus/firmware/ipbus_core/hdl/transactor.vhd
xfile add ipbus/firmware/ipbus_core/hdl/transactor_if.vhd
xfile add ipbus/firmware/ipbus_core/hdl/transactor_sm.vhd
xfile add ipbus/firmware/ipbus_core/hdl/transactor_cfg.vhd
xfile add ipbus/firmware/ipbus_core/hdl/stretcher.vhd
xfile add ipbus/firmware/ipbus_core/hdl/ipbus_fabric.vhd
xfile add ipbus/firmware/example_designs/hdl/clock_div.vhd
# Add Opencores files for i2c interface
xfile add external/opencores_i2c/i2c_master_bit_ctrl.vhd
xfile add external/opencores_i2c/i2c_master_byte_ctrl.vhd
xfile add external/opencores_i2c/i2c_master_registers.vhd
xfile add external/opencores_i2c/i2c_master_top.vhd
# Add TLU cores....
# Add cores for Ethernet
puts "Adding and Regenerating TLU cores"
exec cp fmc-mtlu/firmware/ise/ipcore_dir/tlu_event_fifo.xco ipcore_dir
exec cp fmc-mtlu/firmware/ise/ipcore_dir/FIFO.xco ipcore_dir
exec cp fmc-mtlu/firmware/ise/ipcore_dir/CounterUp.xco ipcore_dir
exec cp fmc-mtlu/firmware/ise/ipcore_dir/internalTriggerGenerator.xco ipcore_dir
xfile add ipcore_dir/tlu_event_fifo.xco
xfile add ipcore_dir/FIFO.xco
xfile add ipcore_dir/CounterUp.xco
xfile add ipcore_dir/internalTriggerGenerator.xco
# Don't regenerate cores for now...
#cd ipcore_dir
#catch {exec coregen -r -b tlu_event_fifo.xco -p coregen.cgp}
#catch {exec coregen -r -b FIFO.xco -p coregen.cgp}
#catch {exec coregen -r -b CounterUp.xco -p coregen.cgp}
#catch {exec coregen -r -b internalTriggerGenerator.xco -p coregen.cgp}
#cd ..
puts "Adding TLU Files "
# Add FMC-MTLU files. First the hand-written VHDL
xfile add fmc-mtlu/firmware/hdl/common/dualSERDES_1to4_rtl.vhd
xfile add fmc-mtlu/firmware/hdl/common/DUTInterfaces_rtl.vhd
xfile add fmc-mtlu/firmware/hdl/common/eventBuffer_rtl.vhd
xfile add fmc-mtlu/firmware/hdl/common/eventFormatter_rtl.vhd
xfile add fmc-mtlu/firmware/hdl/common/i2c_master_rtl.vhd
xfile add fmc-mtlu/firmware/hdl/common/ipbus_addr_decode.vhd
xfile add fmc-mtlu/firmware/hdl/common/IPBusInterface_rtl.vhd
xfile add fmc-mtlu/firmware/hdl/common/ipbus_ver.vhd
xfile add fmc-mtlu/firmware/hdl/common/logic_clocks_rtl.vhd
xfile add fmc-mtlu/firmware/hdl/common/pulseClockDomainCrossing_rtl.vhd
xfile add fmc-mtlu/firmware/hdl/common/Reg_2clks.vhd
xfile add fmc-mtlu/firmware/hdl/common/registerCounter_rtl.vhd
xfile add fmc-mtlu/firmware/hdl/common/serdes_1_to_n_SDR.vhd
xfile add fmc-mtlu/firmware/hdl/common/sync_reg.vhd
xfile add fmc-mtlu/firmware/hdl/common/triggerInputs_rtl.vhd
xfile add fmc-mtlu/firmware/hdl/common/triggerLogic_rtl.vhd
xfile add fmc-mtlu/firmware/hdl/common/clocks_s6_extphy.vhd
xfile add fmc-mtlu/firmware/hdl/common/arrivalTimeLUT_rtl.vhd
xfile add fmc-mtlu/firmware/hdl/test/clock_divider_s6.v
# Then add the HDL-Designer generated files..
xfile add fmc-mtlu/firmware/hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/top_extphy_struct.vhd
xfile add fmc-mtlu/firmware/hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/fmcTLU_pkg_body.vhd
xfile add fmc-mtlu/firmware/hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/fmcTLU_pkg.vhd
# Add user constraints file
xfile add fmc-mtlu/firmware/ucf/sp605_FMC_mTLU.ucf
project close
puts "Successfully finished building project file"
ise/fmc_tlu_top_sp601/fmcTLU_v1.xise deleted 100644 → 0
View file @ 1c3bdc36
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<project xmlns="http://www.xilinx.com/XMLSchema" xmlns:xil_pn="http://www.xilinx.com/XMLSchema">
<header>
<!-- ISE source project file created by Project Navigator. -->
<!-- -->
<!-- This file contains project source information including a list of -->
<!-- project source files, project and process properties. This file, -->
<!-- along with the project source files, is sufficient to open and -->
<!-- implement in ISE Project Navigator. -->
<!-- -->
<!-- Copyright (c) 1995-2013 Xilinx, Inc. All rights reserved. -->
</header>
<version xil_pn:ise_version="14.6" xil_pn:schema_version="2"/>
<files>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/clocks_s6_extphy.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="1"/>
<association xil_pn:name="Implementation" xil_pn:seqID="43"/>
</file>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/dualSERDES_1to4_rtl.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="2"/>
<association xil_pn:name="Implementation" xil_pn:seqID="42"/>
</file>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/DUTInterfaces_rtl.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="3"/>
<association xil_pn:name="Implementation" xil_pn:seqID="52"/>
</file>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/eventBuffer_rtl.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="4"/>
<association xil_pn:name="Implementation" xil_pn:seqID="51"/>
</file>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/eventFormatter_rtl.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="5"/>
<association xil_pn:name="Implementation" xil_pn:seqID="50"/>
</file>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/fmcTLU_pkg_body.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="6"/>
<association xil_pn:name="Implementation" xil_pn:seqID="41"/>
</file>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/fmcTLU_pkg.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="7"/>
<association xil_pn:name="Implementation" xil_pn:seqID="29"/>
</file>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/ipbus_ver.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="8"/>
<association xil_pn:name="Implementation" xil_pn:seqID="40"/>
</file>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/IPBusInterface_rtl.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="9"/>
<association xil_pn:name="Implementation" xil_pn:seqID="48"/>
</file>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/logic_clocks_rtl.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="10"/>
<association xil_pn:name="Implementation" xil_pn:seqID="47"/>
</file>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/top_extphy_struct.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="11"/>
<association xil_pn:name="Implementation" xil_pn:seqID="53"/>
</file>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/triggerInputs_rtl.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="12"/>
<association xil_pn:name="Implementation" xil_pn:seqID="46"/>
</file>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/triggerLogic_rtl.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="13"/>
<association xil_pn:name="Implementation" xil_pn:seqID="45"/>
</file>
<file xil_pn:name="../../IPbusFirmware/firmware/ipbus/hdl/arp.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="14"/>
<association xil_pn:name="Implementation" xil_pn:seqID="19"/>
</file>
<file xil_pn:name="../../IPbusFirmware/firmware/ipbus/hdl/bus_arb.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="15"/>
<association xil_pn:name="Implementation" xil_pn:seqID="0"/>
</file>
<file xil_pn:name="../../IPbusFirmware/firmware/ipbus/hdl/gbe_rxpacketbuffer.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="16"/>
<association xil_pn:name="Implementation" xil_pn:seqID="18"/>
</file>
<file xil_pn:name="../../IPbusFirmware/firmware/ipbus/hdl/gbe_txpacketbuffer.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="17"/>
<association xil_pn:name="Implementation" xil_pn:seqID="17"/>
</file>
<file xil_pn:name="../../IPbusFirmware/firmware/ipbus/hdl/icmp.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="18"/>
<association xil_pn:name="Implementation" xil_pn:seqID="16"/>
</file>
<file xil_pn:name="../../IPbusFirmware/firmware/ipbus/hdl/ip_checksum_8bit.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="19"/>
<association xil_pn:name="Implementation" xil_pn:seqID="1"/>
</file>
<file xil_pn:name="../../IPbusFirmware/firmware/ipbus/hdl/ipbus_bus_decl.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="20"/>
<association xil_pn:name="Implementation" xil_pn:seqID="3"/>
</file>
<file xil_pn:name="../../IPbusFirmware/firmware/ipbus/hdl/ipbus_ctrl_decl.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="21"/>
<association xil_pn:name="Implementation" xil_pn:seqID="15"/>
</file>
<file xil_pn:name="../../IPbusFirmware/firmware/ipbus/hdl/ipbus_ctrl_udponly.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="22"/>
<association xil_pn:name="Implementation" xil_pn:seqID="32"/>
</file>
<file xil_pn:name="../../IPbusFirmware/firmware/ipbus/hdl/ipbus_fabric.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="23"/>
<association xil_pn:name="Implementation" xil_pn:seqID="31"/>
</file>
<file xil_pn:name="../../IPbusFirmware/firmware/ipbus/hdl/ipbus_package.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="24"/>
<association xil_pn:name="Implementation" xil_pn:seqID="2"/>
</file>
<file xil_pn:name="../../IPbusFirmware/firmware/ipbus/hdl/packet_handler.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="25"/>
<association xil_pn:name="Implementation" xil_pn:seqID="14"/>
</file>
<file xil_pn:name="../../IPbusFirmware/firmware/ipbus/hdl/sub_packetbuffer.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="26"/>
<association xil_pn:name="Implementation" xil_pn:seqID="13"/>
</file>
<file xil_pn:name="../../IPbusFirmware/firmware/ipbus/hdl/sub_packetreq.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="27"/>
<association xil_pn:name="Implementation" xil_pn:seqID="9"/>
</file>
<file xil_pn:name="../../IPbusFirmware/firmware/ipbus/hdl/sub_packetresp.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="28"/>
<association xil_pn:name="Implementation" xil_pn:seqID="8"/>
</file>
<file xil_pn:name="../../IPbusFirmware/firmware/ipbus/hdl/transactor_rx.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="29"/>
<association xil_pn:name="Implementation" xil_pn:seqID="7"/>
</file>
<file xil_pn:name="../../IPbusFirmware/firmware/ipbus/hdl/transactor_sm.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="30"/>
<association xil_pn:name="Implementation" xil_pn:seqID="6"/>
</file>
<file xil_pn:name="../../IPbusFirmware/firmware/ipbus/hdl/transactor_tx.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="31"/>
<association xil_pn:name="Implementation" xil_pn:seqID="5"/>
</file>
<file xil_pn:name="../../IPbusFirmware/firmware/ipbus/hdl/transactor.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="32"/>
<association xil_pn:name="Implementation" xil_pn:seqID="12"/>
</file>
<file xil_pn:name="../../IPbusFirmware/firmware/ipbus/hdl/udp_shim.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="33"/>
<association xil_pn:name="Implementation" xil_pn:seqID="11"/>
</file>
<file xil_pn:name="../../IPbusFirmware/firmware/ethernet/hdl/emac_hostbus_decl.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="34"/>
<association xil_pn:name="Implementation" xil_pn:seqID="24"/>
</file>
<file xil_pn:name="../../IPbusFirmware/firmware/ethernet/hdl/eth_s6_gmii.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="35"/>
<association xil_pn:name="Implementation" xil_pn:seqID="34"/>
</file>
<file xil_pn:name="../../IPbusFirmware/firmware/ethernet/hdl/mac_arbiter_decl.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="36"/>
<association xil_pn:name="Implementation" xil_pn:seqID="0"/>
</file>
<file xil_pn:name="../../IPbusFirmware/firmware/ipbus/hdl/slaves/ipbus_emac_hostbus.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="37"/>
<association xil_pn:name="Implementation" xil_pn:seqID="30"/>
</file>
<file xil_pn:name="ipcore_dir/dpram_8x12_32x10.xco" xil_pn:type="FILE_COREGEN">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="38"/>
<association xil_pn:name="Implementation" xil_pn:seqID="4"/>
</file>
<file xil_pn:name="ipcore_dir/sdpram_8x11.xco" xil_pn:type="FILE_COREGEN">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="39"/>
<association xil_pn:name="Implementation" xil_pn:seqID="10"/>
</file>
<file xil_pn:name="ipcore_dir/soft_emac_gmii_4_5.xco" xil_pn:type="FILE_COREGEN">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="40"/>
<association xil_pn:name="Implementation" xil_pn:seqID="25"/>
</file>
<file xil_pn:name="../../IPbusFirmware/firmware/example_designs/hdl/clock_divider_s6.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="41"/>
<association xil_pn:name="Implementation" xil_pn:seqID="23"/>
</file>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/ipbus_addr_decode.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="42"/>
<association xil_pn:name="Implementation" xil_pn:seqID="28"/>
</file>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/arrivalTimeLUT_rtl.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="43"/>
<association xil_pn:name="Implementation" xil_pn:seqID="44"/>
</file>
<file xil_pn:name="ipcore_dir/tlu_event_fifo.xco" xil_pn:type="FILE_COREGEN">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="44"/>
<association xil_pn:name="Implementation" xil_pn:seqID="35"/>
</file>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/registerCounter_rtl.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="45"/>
<association xil_pn:name="Implementation" xil_pn:seqID="39"/>
</file>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/i2c_master_rtl.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="46"/>
<association xil_pn:name="Implementation" xil_pn:seqID="49"/>
</file>
<file xil_pn:name="../../IPbusFirmware/firmware/external/opencores_i2c/i2c_master_bit_ctrl.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="47"/>
<association xil_pn:name="Implementation" xil_pn:seqID="22"/>
</file>
<file xil_pn:name="../../IPbusFirmware/firmware/external/opencores_i2c/i2c_master_byte_ctrl.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="48"/>
<association xil_pn:name="Implementation" xil_pn:seqID="21"/>
</file>
<file xil_pn:name="../../IPbusFirmware/firmware/external/opencores_i2c/i2c_master_registers.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="49"/>
<association xil_pn:name="Implementation" xil_pn:seqID="20"/>
</file>
<file xil_pn:name="../../IPbusFirmware/firmware/external/opencores_i2c/i2c_master_top.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="50"/>
<association xil_pn:name="Implementation" xil_pn:seqID="33"/>
</file>
<file xil_pn:name="ipcore_dir/internalTriggerGenerator.xco" xil_pn:type="FILE_COREGEN">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="51"/>
<association xil_pn:name="Implementation" xil_pn:seqID="36"/>
</file>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/GPP_ipb_rtl.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="52"/>
<association xil_pn:name="Implementation" xil_pn:seqID="0"/>
</file>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/GPP_rtl.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="53"/>
<association xil_pn:name="Implementation" xil_pn:seqID="0"/>
</file>
<file xil_pn:name="../../../ise/ipcore_dir/CounterUp.xco" xil_pn:type="FILE_COREGEN">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="54"/>
<association xil_pn:name="Implementation" xil_pn:seqID="26"/>
</file>
<file xil_pn:name="../../../ise/ipcore_dir/CounterDown.xco" xil_pn:type="FILE_COREGEN">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="55"/>
<association xil_pn:name="Implementation" xil_pn:seqID="0"/>
</file>
<file xil_pn:name="../../../ise/ipcore_dir/FIFO.xco" xil_pn:type="FILE_COREGEN">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="56"/>
<association xil_pn:name="Implementation" xil_pn:seqID="37"/>
</file>
<file xil_pn:name="../../../ucf/sp601_FMC_mTLU.ucf" xil_pn:type="FILE_UCF">
<association xil_pn:name="Implementation" xil_pn:seqID="0"/>
</file>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/sync_reg.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="59"/>
<association xil_pn:name="Implementation" xil_pn:seqID="38"/>
</file>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/Reg_2clks.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="60"/>
<association xil_pn:name="Implementation" xil_pn:seqID="27"/>
</file>
</files>
<properties>
<property xil_pn:name="AES Initial Vector spartan6" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="AES Key (Hex String) spartan6" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Add I/O Buffers" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Allow Logic Optimization Across Hierarchy" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Allow SelectMAP Pins to Persist" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Allow Unexpanded Blocks" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Allow Unmatched LOC Constraints" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Allow Unmatched Timing Group Constraints" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Analysis Effort Level" xil_pn:value="Standard" xil_pn:valueState="default"/>
<property xil_pn:name="Asynchronous To Synchronous" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Auto Implementation Compile Order" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Auto Implementation Top" xil_pn:value="false" xil_pn:valueState="non-default"/>
<property xil_pn:name="Automatic BRAM Packing" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Automatically Insert glbl Module in the Netlist" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Automatically Run Generate Target PROM/ACE File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="BRAM Utilization Ratio" xil_pn:value="100" xil_pn:valueState="default"/>
<property xil_pn:name="Bring Out Global Set/Reset Net as a Port" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Bring Out Global Tristate Net as a Port" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Bus Delimiter" xil_pn:value="&lt;>" xil_pn:valueState="default"/>
<property xil_pn:name="Case" xil_pn:value="Maintain" xil_pn:valueState="default"/>
<property xil_pn:name="Case Implementation Style" xil_pn:value="None" xil_pn:valueState="default"/>
<property xil_pn:name="Change Device Speed To" xil_pn:value="-2" xil_pn:valueState="default"/>
<property xil_pn:name="Change Device Speed To Post Trace" xil_pn:value="-2" xil_pn:valueState="default"/>
<property xil_pn:name="Combinatorial Logic Optimization" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Compile EDK Simulation Library" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Compile SIMPRIM (Timing) Simulation Library" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Compile UNISIM (Functional) Simulation Library" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Compile XilinxCoreLib (CORE Generator) Simulation Library" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Compile for HDL Debugging" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Clk (Configuration Pins)" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Pin Done" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Pin M0" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Pin M1" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Pin M2" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Pin Program" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Rate spartan6" xil_pn:value="2" xil_pn:valueState="default"/>
<property xil_pn:name="Correlate Output to Input Design" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create ASCII Configuration File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create Binary Configuration File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create Bit File" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Create I/O Pads from Ports" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create IEEE 1532 Configuration File spartan6" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create Logic Allocation File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create Mask File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create ReadBack Data Files" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Cross Clock Analysis" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="DSP Utilization Ratio" xil_pn:value="100" xil_pn:valueState="default"/>
<property xil_pn:name="Delay Values To Be Read from SDF" xil_pn:value="Setup Time" xil_pn:valueState="default"/>
<property xil_pn:name="Device" xil_pn:value="xc6slx16" xil_pn:valueState="non-default"/>
<property xil_pn:name="Device Family" xil_pn:value="Spartan6" xil_pn:valueState="non-default"/>
<property xil_pn:name="Device Speed Grade/Select ABS Minimum" xil_pn:value="-2" xil_pn:valueState="default"/>
<property xil_pn:name="Disable Detailed Package Model Insertion" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Do Not Escape Signal and Instance Names in Netlist" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Done (Output Events)" xil_pn:value="Default (4)" xil_pn:valueState="default"/>
<property xil_pn:name="Drive Awake Pin During Suspend/Wake Sequence spartan6" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Drive Done Pin High" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Enable BitStream Compression" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Cyclic Redundancy Checking (CRC) spartan6" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Debugging of Serial Mode BitStream" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Enable External Master Clock spartan6" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Hardware Co-Simulation" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Internal Done Pipe" xil_pn:value="true" xil_pn:valueState="non-default"/>
<property xil_pn:name="Enable Message Filtering" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Multi-Pin Wake-Up Suspend Mode spartan6" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Multi-Threading" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Multi-Threading par spartan6" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Outputs (Output Events)" xil_pn:value="Default (5)" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Suspend/Wake Global Set/Reset spartan6" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Encrypt Bitstream spartan6" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Encrypt Key Select spartan6" xil_pn:value="BBRAM" xil_pn:valueState="default"/>
<property xil_pn:name="Equivalent Register Removal Map" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Equivalent Register Removal XST" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Essential Bits" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Evaluation Development Board" xil_pn:value="Spartan-6 SP601 Evaluation Platform" xil_pn:valueState="non-default"/>
<property xil_pn:name="Exclude Compilation of Deprecated EDK Cores" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Exclude Compilation of EDK Sub-Libraries" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Extra Cost Tables Map" xil_pn:value="0" xil_pn:valueState="default"/>
<property xil_pn:name="Extra Effort (Highest PAR level only)" xil_pn:value="None" xil_pn:valueState="default"/>
<property xil_pn:name="FPGA Start-Up Clock" xil_pn:value="CCLK" xil_pn:valueState="default"/>
<property xil_pn:name="FSM Encoding Algorithm" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="FSM Style" xil_pn:value="LUT" xil_pn:valueState="default"/>
<property xil_pn:name="Filter Files From Compile Order" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Flatten Output Netlist" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Functional Model Target Language ArchWiz" xil_pn:value="VHDL" xil_pn:valueState="default"/>
<property xil_pn:name="Functional Model Target Language Coregen" xil_pn:value="VHDL" xil_pn:valueState="default"/>
<property xil_pn:name="Functional Model Target Language Schematic" xil_pn:value="VHDL" xil_pn:valueState="default"/>
<property xil_pn:name="GTS Cycle During Suspend/Wakeup Sequence spartan6" xil_pn:value="4" xil_pn:valueState="default"/>
<property xil_pn:name="GWE Cycle During Suspend/Wakeup Sequence spartan6" xil_pn:value="5" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Architecture Only (No Entity Declaration)" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Asynchronous Delay Report" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Clock Region Report" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Constraints Interaction Report" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Constraints Interaction Report Post Trace" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Datasheet Section" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Datasheet Section Post Trace" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Detailed MAP Report" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Multiple Hierarchical Netlist Files" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Post-Place &amp; Route Power Report" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Post-Place &amp; Route Simulation Model" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate RTL Schematic" xil_pn:value="Yes" xil_pn:valueState="default"/>
<property xil_pn:name="Generate SAIF File for Power Optimization/Estimation Par" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Testbench File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Timegroups Section" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Timegroups Section Post Trace" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generics, Parameters" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Global Optimization Goal" xil_pn:value="AllClockNets" xil_pn:valueState="default"/>
<property xil_pn:name="Global Optimization map spartan6" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Global Set/Reset Port Name" xil_pn:value="GSR_PORT" xil_pn:valueState="default"/>
<property xil_pn:name="Global Tristate Port Name" xil_pn:value="GTS_PORT" xil_pn:valueState="default"/>
<property xil_pn:name="Hierarchy Separator" xil_pn:value="/" xil_pn:valueState="default"/>
<property xil_pn:name="ISim UUT Instance Name" xil_pn:value="UUT" xil_pn:valueState="default"/>
<property xil_pn:name="Ignore User Timing Constraints Map" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Ignore User Timing Constraints Par" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Implementation Top" xil_pn:value="Architecture|top_extphy|struct" xil_pn:valueState="non-default"/>
<property xil_pn:name="Implementation Top File" xil_pn:value="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/top_extphy_struct.vhd" xil_pn:valueState="non-default"/>
<property xil_pn:name="Implementation Top Instance Path" xil_pn:value="/top_extphy" xil_pn:valueState="non-default"/>
<property xil_pn:name="Include 'uselib Directive in Verilog File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Include SIMPRIM Models in Verilog File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Include UNISIM Models in Verilog File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Include sdf_annotate task in Verilog File" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Incremental Compilation" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Insert Buffers to Prevent Pulse Swallowing" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Instantiation Template Target Language Xps" xil_pn:value="VHDL" xil_pn:valueState="default"/>
<property xil_pn:name="JTAG Pin TCK" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="JTAG Pin TDI" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="JTAG Pin TDO" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="JTAG Pin TMS" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Keep Hierarchy" xil_pn:value="No" xil_pn:valueState="default"/>
<property xil_pn:name="LUT Combining Map" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="LUT Combining Xst" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Language" xil_pn:value="VHDL" xil_pn:valueState="default"/>
<property xil_pn:name="Last Applied Goal" xil_pn:value="Balanced" xil_pn:valueState="default"/>
<property xil_pn:name="Last Applied Strategy" xil_pn:value="Xilinx Default (unlocked)" xil_pn:valueState="default"/>
<property xil_pn:name="Last Unlock Status" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Launch SDK after Export" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Library for Verilog Sources" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Load glbl" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Manual Implementation Compile Order" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Map Slice Logic into Unused Block RAMs" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Mask Pins for Multi-Pin Wake-Up Suspend Mode spartan6" xil_pn:value="0x00" xil_pn:valueState="default"/>
<property xil_pn:name="Max Fanout" xil_pn:value="100000" xil_pn:valueState="default"/>
<property xil_pn:name="Maximum Compression" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Maximum Number of Lines in Report" xil_pn:value="1000" xil_pn:valueState="default"/>
<property xil_pn:name="Maximum Signal Name Length" xil_pn:value="20" xil_pn:valueState="default"/>
<property xil_pn:name="Move First Flip-Flop Stage" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Move Last Flip-Flop Stage" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="MultiBoot: Insert IPROG CMD in the Bitfile spartan6" xil_pn:value="Enable" xil_pn:valueState="default"/>
<property xil_pn:name="MultiBoot: Next Configuration Mode spartan6" xil_pn:value="001" xil_pn:valueState="default"/>
<property xil_pn:name="MultiBoot: Starting Address for Golden Configuration spartan6" xil_pn:value="0x00000000" xil_pn:valueState="default"/>
<property xil_pn:name="MultiBoot: Starting Address for Next Configuration spartan6" xil_pn:value="0x00000000" xil_pn:valueState="default"/>
<property xil_pn:name="MultiBoot: Use New Mode for Next Configuration spartan6" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="MultiBoot: User-Defined Register for Failsafe Scheme spartan6" xil_pn:value="0x0000" xil_pn:valueState="default"/>
<property xil_pn:name="Netlist Hierarchy" xil_pn:value="As Optimized" xil_pn:valueState="default"/>
<property xil_pn:name="Netlist Translation Type" xil_pn:value="Timestamp" xil_pn:valueState="default"/>
<property xil_pn:name="Number of Clock Buffers" xil_pn:value="16" xil_pn:valueState="default"/>
<property xil_pn:name="Number of Paths in Error/Verbose Report" xil_pn:value="3" xil_pn:valueState="default"/>
<property xil_pn:name="Number of Paths in Error/Verbose Report Post Trace" xil_pn:value="3" xil_pn:valueState="default"/>
<property xil_pn:name="Optimization Effort spartan6" xil_pn:value="Normal" xil_pn:valueState="default"/>
<property xil_pn:name="Optimization Goal" xil_pn:value="Speed" xil_pn:valueState="default"/>
<property xil_pn:name="Optimize Instantiated Primitives" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Other Bitgen Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Bitgen Command Line Options spartan6" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Compiler Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Compiler Options Map" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Compiler Options Par" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Compiler Options Translate" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Compxlib Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Map Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other NETGEN Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Ngdbuild Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Place &amp; Route Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Simulator Commands Behavioral" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Simulator Commands Post-Map" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Simulator Commands Post-Route" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Simulator Commands Post-Translate" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other XPWR Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other XST Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Output Extended Identifiers" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Output File Name" xil_pn:value="top_extphy" xil_pn:valueState="default"/>
<property xil_pn:name="Overwrite Compiled Libraries" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Pack I/O Registers into IOBs" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Pack I/O Registers/Latches into IOBs" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Package" xil_pn:value="csg324" xil_pn:valueState="default"/>
<property xil_pn:name="Perform Advanced Analysis" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Perform Advanced Analysis Post Trace" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Perform Timing-Driven Packing and Placement" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Place &amp; Route Effort Level (Overall)" xil_pn:value="High" xil_pn:valueState="default"/>
<property xil_pn:name="Place And Route Mode" xil_pn:value="Normal Place and Route" xil_pn:valueState="default"/>
<property xil_pn:name="Place MultiBoot Settings into Bitstream spartan6" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Placer Effort Level Map" xil_pn:value="High" xil_pn:valueState="default"/>
<property xil_pn:name="Placer Extra Effort Map" xil_pn:value="None" xil_pn:valueState="default"/>
<property xil_pn:name="Port to be used" xil_pn:value="Auto - default" xil_pn:valueState="default"/>
<property xil_pn:name="Post Map Simulation Model Name" xil_pn:value="top_extphy_map.vhd" xil_pn:valueState="default"/>
<property xil_pn:name="Post Place &amp; Route Simulation Model Name" xil_pn:value="top_extphy_timesim.vhd" xil_pn:valueState="default"/>
<property xil_pn:name="Post Synthesis Simulation Model Name" xil_pn:value="top_extphy_synthesis.vhd" xil_pn:valueState="default"/>
<property xil_pn:name="Post Translate Simulation Model Name" xil_pn:value="top_extphy_translate.vhd" xil_pn:valueState="default"/>
<property xil_pn:name="Power Reduction Map spartan6" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Power Reduction Par" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Power Reduction Xst" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Preferred Language" xil_pn:value="VHDL" xil_pn:valueState="non-default"/>
<property xil_pn:name="Produce Verbose Report" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Project Description" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Property Specification in Project File" xil_pn:value="Store all values" xil_pn:valueState="default"/>
<property xil_pn:name="RAM Extraction" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="RAM Style" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="ROM Extraction" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="ROM Style" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Read Cores" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Reduce Control Sets" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Regenerate Core" xil_pn:value="Under Current Project Setting" xil_pn:valueState="default"/>
<property xil_pn:name="Register Balancing" xil_pn:value="No" xil_pn:valueState="default"/>
<property xil_pn:name="Register Duplication Map" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Register Duplication Xst" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Register Ordering spartan6" xil_pn:value="4" xil_pn:valueState="default"/>
<property xil_pn:name="Release Write Enable (Output Events)" xil_pn:value="Default (6)" xil_pn:valueState="default"/>
<property xil_pn:name="Rename Design Instance in Testbench File to" xil_pn:value="UUT" xil_pn:valueState="default"/>
<property xil_pn:name="Rename Top Level Architecture To" xil_pn:value="Structure" xil_pn:valueState="default"/>
<property xil_pn:name="Rename Top Level Entity to" xil_pn:value="top_extphy" xil_pn:valueState="default"/>
<property xil_pn:name="Rename Top Level Module To" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Report Fastest Path(s) in Each Constraint" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Report Fastest Path(s) in Each Constraint Post Trace" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Report Paths by Endpoint" xil_pn:value="3" xil_pn:valueState="default"/>
<property xil_pn:name="Report Paths by Endpoint Post Trace" xil_pn:value="3" xil_pn:valueState="default"/>
<property xil_pn:name="Report Type" xil_pn:value="Verbose Report" xil_pn:valueState="default"/>
<property xil_pn:name="Report Type Post Trace" xil_pn:value="Verbose Report" xil_pn:valueState="default"/>
<property xil_pn:name="Report Unconstrained Paths" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Report Unconstrained Paths Post Trace" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Reset On Configuration Pulse Width" xil_pn:value="100" xil_pn:valueState="default"/>
<property xil_pn:name="Resource Sharing" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Retain Hierarchy" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Retry Configuration if CRC Error Occurs spartan6" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Revision Select" xil_pn:value="00" xil_pn:valueState="default"/>
<property xil_pn:name="Revision Select Tristate" xil_pn:value="Disable" xil_pn:valueState="default"/>
<property xil_pn:name="Run Design Rules Checker (DRC)" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Run for Specified Time" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Run for Specified Time Map" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Run for Specified Time Par" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Run for Specified Time Translate" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Safe Implementation" xil_pn:value="No" xil_pn:valueState="default"/>
<property xil_pn:name="Security" xil_pn:value="Enable Readback and Reconfiguration" xil_pn:valueState="default"/>
<property xil_pn:name="Selected Simulation Root Source Node Behavioral" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Selected Simulation Root Source Node Post-Map" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Selected Simulation Root Source Node Post-Route" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Selected Simulation Root Source Node Post-Translate" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Selected Simulation Source Node" xil_pn:value="UUT" xil_pn:valueState="default"/>
<property xil_pn:name="Set SPI Configuration Bus Width spartan6" xil_pn:value="1" xil_pn:valueState="default"/>
<property xil_pn:name="Setup External Master Clock Division spartan6" xil_pn:value="1" xil_pn:valueState="default"/>
<property xil_pn:name="Shift Register Extraction" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Shift Register Minimum Size spartan6" xil_pn:value="2" xil_pn:valueState="default"/>
<property xil_pn:name="Show All Models" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Simulation Model Target" xil_pn:value="VHDL" xil_pn:valueState="default"/>
<property xil_pn:name="Simulation Run Time ISim" xil_pn:value="1000 ns" xil_pn:valueState="default"/>
<property xil_pn:name="Simulation Run Time Map" xil_pn:value="1000 ns" xil_pn:valueState="default"/>
<property xil_pn:name="Simulation Run Time Par" xil_pn:value="1000 ns" xil_pn:valueState="default"/>
<property xil_pn:name="Simulation Run Time Translate" xil_pn:value="1000 ns" xil_pn:valueState="default"/>
<property xil_pn:name="Simulator" xil_pn:value="ISim (VHDL/Verilog)" xil_pn:valueState="default"/>
<property xil_pn:name="Slice Utilization Ratio" xil_pn:value="100" xil_pn:valueState="default"/>
<property xil_pn:name="Specify 'define Macro Name and Value" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Specify Top Level Instance Names Behavioral" xil_pn:value="Default" xil_pn:valueState="default"/>
<property xil_pn:name="Specify Top Level Instance Names Post-Map" xil_pn:value="Default" xil_pn:valueState="default"/>
<property xil_pn:name="Specify Top Level Instance Names Post-Route" xil_pn:value="Default" xil_pn:valueState="default"/>
<property xil_pn:name="Specify Top Level Instance Names Post-Translate" xil_pn:value="Default" xil_pn:valueState="default"/>
<property xil_pn:name="Speed Grade" xil_pn:value="-2" xil_pn:valueState="non-default"/>
<property xil_pn:name="Starting Placer Cost Table (1-100) Map spartan6" xil_pn:value="1" xil_pn:valueState="default"/>
<property xil_pn:name="Synthesis Tool" xil_pn:value="XST (VHDL/Verilog)" xil_pn:valueState="default"/>
<property xil_pn:name="Target Simulator" xil_pn:value="Please Specify" xil_pn:valueState="default"/>
<property xil_pn:name="Timing Mode Map" xil_pn:value="Performance Evaluation" xil_pn:valueState="default"/>
<property xil_pn:name="Timing Mode Par" xil_pn:value="Performance Evaluation" xil_pn:valueState="default"/>
<property xil_pn:name="Top-Level Module Name in Output Netlist" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Top-Level Source Type" xil_pn:value="HDL" xil_pn:valueState="default"/>
<property xil_pn:name="Trim Unconnected Signals" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Tristate On Configuration Pulse Width" xil_pn:value="0" xil_pn:valueState="default"/>
<property xil_pn:name="Unused IOB Pins" xil_pn:value="Pull Down" xil_pn:valueState="default"/>
<property xil_pn:name="Use 64-bit PlanAhead on 64-bit Systems" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Use Clock Enable" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Project File Behavioral" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Project File Post-Map" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Project File Post-Route" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Project File Post-Translate" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Simulation Command File Behavioral" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Simulation Command File Map" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Simulation Command File Par" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Simulation Command File Translate" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Waveform Configuration File Behav" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Waveform Configuration File Map" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Waveform Configuration File Par" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Waveform Configuration File Translate" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use DSP Block spartan6" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Use LOC Constraints" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Use RLOC Constraints" xil_pn:value="Yes" xil_pn:valueState="default"/>
<property xil_pn:name="Use Smart Guide" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Synchronous Reset" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Use Synchronous Set" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Use Synthesis Constraints File" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="User Browsed Strategy Files" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="UserID Code (8 Digit Hexadecimal)" xil_pn:value="0xFFFFFFFF" xil_pn:valueState="default"/>
<property xil_pn:name="VCCAUX Voltage Level spartan6" xil_pn:value="2.5V" xil_pn:valueState="default"/>
<property xil_pn:name="VHDL Source Analysis Standard" xil_pn:value="VHDL-200X" xil_pn:valueState="non-default"/>
<property xil_pn:name="Value Range Check" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Verilog Macros" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Wait for DCM and PLL Lock (Output Events) spartan6" xil_pn:value="Default (NoWait)" xil_pn:valueState="default"/>
<property xil_pn:name="Wakeup Clock spartan6" xil_pn:value="Startup Clock" xil_pn:valueState="default"/>
<property xil_pn:name="Watchdog Timer Value spartan6" xil_pn:value="0xFFFF" xil_pn:valueState="default"/>
<property xil_pn:name="Working Directory" xil_pn:value="." xil_pn:valueState="non-default"/>
<property xil_pn:name="Write Timing Constraints" xil_pn:value="false" xil_pn:valueState="default"/>
<!-- -->
<!-- The following properties are for internal use only. These should not be modified.-->
<!-- -->
<property xil_pn:name="PROP_BehavioralSimTop" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_DesignName" xil_pn:value="fmcTLU_v1" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_DevFamilyPMName" xil_pn:value="spartan6" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_FPGAConfiguration" xil_pn:value="FPGAConfiguration" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_PostMapSimTop" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_PostParSimTop" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_PostSynthSimTop" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_PostXlateSimTop" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_PreSynthesis" xil_pn:value="PreSynthesis" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_intProjectCreationTimestamp" xil_pn:value="2012-11-20T09:59:25" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_intWbtProjectID" xil_pn:value="5B4160A48D5521B60FEAADD3AB81D9BF" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_intWorkingDirLocWRTProjDir" xil_pn:value="Same" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_intWorkingDirUsed" xil_pn:value="No" xil_pn:valueState="non-default"/>
</properties>
<bindings>
<binding xil_pn:location="/top_extphy" xil_pn:name="../../../ucf/sp601_FMC_mTLU.ucf"/>
</bindings>
<libraries/>
<autoManagedFiles>
<!-- The following files are identified by `include statements in verilog -->
<!-- source files and are automatically managed by Project Navigator. -->
<!-- -->
<!-- Do not hand-edit this section, as it will be overwritten when the -->
<!-- project is analyzed based on files automatically identified as -->
<!-- include files. -->
<file xil_pn:name="../../IPbusFirmware/firmware/ipbus/hdl/ipbus_v_defs.v" xil_pn:type="FILE_VERILOG"/>
</autoManagedFiles>
</project>
ise/fmc_tlu_top_sp601/setup_ipcore_dir.sh deleted 100755 → 0
View file @ 1c3bdc36
mkdir ipcore_dir
cp ipbus-firmware/ethernet/coregen/soft_emac_gmii_4_5.xco ipcore_dir
cp ipbus-firmware/ipbus/coregen/sdpram_8x11.xco ipcore_dir
cp ipbus-firmware/ipbus/coregen/dpram_8x12_32x10.xco ipcore_dir
ise/projects/fmcTLU_v1.xise deleted 100644 → 0
View file @ 1c3bdc36
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<project xmlns="http://www.xilinx.com/XMLSchema" xmlns:xil_pn="http://www.xilinx.com/XMLSchema">
<header>
<!-- ISE source project file created by Project Navigator. -->
<!-- -->
<!-- This file contains project source information including a list of -->
<!-- project source files, project and process properties. This file, -->
<!-- along with the project source files, is sufficient to open and -->
<!-- implement in ISE Project Navigator. -->
<!-- -->
<!-- Copyright (c) 1995-2011 Xilinx, Inc. All rights reserved. -->
</header>
<version xil_pn:ise_version="13.4" xil_pn:schema_version="2"/>
<files>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/clocks_s6_extphy.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="1"/>
<association xil_pn:name="Implementation" xil_pn:seqID="45"/>
</file>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/dualSERDES_1to4_rtl.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="2"/>
<association xil_pn:name="Implementation" xil_pn:seqID="44"/>
</file>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/DUTInterfaces_rtl.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="3"/>
<association xil_pn:name="Implementation" xil_pn:seqID="55"/>
</file>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/eventBuffer_rtl.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="4"/>
<association xil_pn:name="Implementation" xil_pn:seqID="54"/>
</file>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/eventFormatter_rtl.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="5"/>
<association xil_pn:name="Implementation" xil_pn:seqID="53"/>
</file>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/fmcTLU_pkg_body.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="6"/>
<association xil_pn:name="Implementation" xil_pn:seqID="43"/>
</file>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/fmcTLU_pkg.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="7"/>
<association xil_pn:name="Implementation" xil_pn:seqID="30"/>
</file>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/ipbus_ver.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="8"/>
<association xil_pn:name="Implementation" xil_pn:seqID="41"/>
</file>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/IPBusInterface_rtl.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="9"/>
<association xil_pn:name="Implementation" xil_pn:seqID="50"/>
</file>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/logic_clocks_rtl.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="10"/>
<association xil_pn:name="Implementation" xil_pn:seqID="49"/>
</file>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/top_extphy_struct.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="11"/>
<association xil_pn:name="Implementation" xil_pn:seqID="56"/>
</file>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/triggerInputs_rtl.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="12"/>
<association xil_pn:name="Implementation" xil_pn:seqID="48"/>
</file>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/triggerLogic_rtl.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="13"/>
<association xil_pn:name="Implementation" xil_pn:seqID="47"/>
</file>
<file xil_pn:name="../firmware/ipbus/hdl/arp.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="14"/>
<association xil_pn:name="Implementation" xil_pn:seqID="26"/>
</file>
<file xil_pn:name="../firmware/ipbus/hdl/bus_arb.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="15"/>
<association xil_pn:name="Implementation" xil_pn:seqID="0"/>
</file>
<file xil_pn:name="../firmware/ipbus/hdl/gbe_rxpacketbuffer.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="16"/>
<association xil_pn:name="Implementation" xil_pn:seqID="25"/>
</file>
<file xil_pn:name="../firmware/ipbus/hdl/gbe_txpacketbuffer.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="17"/>
<association xil_pn:name="Implementation" xil_pn:seqID="24"/>
</file>
<file xil_pn:name="../firmware/ipbus/hdl/icmp.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="18"/>
<association xil_pn:name="Implementation" xil_pn:seqID="23"/>
</file>
<file xil_pn:name="../firmware/ipbus/hdl/ip_checksum_8bit.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="19"/>
<association xil_pn:name="Implementation" xil_pn:seqID="2"/>
</file>
<file xil_pn:name="../firmware/ipbus/hdl/ipbus_bus_decl.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="20"/>
<association xil_pn:name="Implementation" xil_pn:seqID="4"/>
</file>
<file xil_pn:name="../firmware/ipbus/hdl/ipbus_ctrl_decl.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="21"/>
<association xil_pn:name="Implementation" xil_pn:seqID="22"/>
</file>
<file xil_pn:name="../firmware/ipbus/hdl/ipbus_ctrl_udponly.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="22"/>
<association xil_pn:name="Implementation" xil_pn:seqID="38"/>
</file>
<file xil_pn:name="../firmware/ipbus/hdl/ipbus_fabric.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="24"/>
<association xil_pn:name="Implementation" xil_pn:seqID="37"/>
</file>
<file xil_pn:name="../firmware/ipbus/hdl/ipbus_package.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="25"/>
<association xil_pn:name="Implementation" xil_pn:seqID="3"/>
</file>
<file xil_pn:name="../firmware/ipbus/hdl/packet_handler.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="27"/>
<association xil_pn:name="Implementation" xil_pn:seqID="21"/>
</file>
<file xil_pn:name="../firmware/ipbus/hdl/sub_packetbuffer.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="28"/>
<association xil_pn:name="Implementation" xil_pn:seqID="20"/>
</file>
<file xil_pn:name="../firmware/ipbus/hdl/sub_packetreq.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="29"/>
<association xil_pn:name="Implementation" xil_pn:seqID="10"/>
</file>
<file xil_pn:name="../firmware/ipbus/hdl/sub_packetresp.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="30"/>
<association xil_pn:name="Implementation" xil_pn:seqID="9"/>
</file>
<file xil_pn:name="../firmware/ipbus/hdl/transactor_rx.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="31"/>
<association xil_pn:name="Implementation" xil_pn:seqID="8"/>
</file>
<file xil_pn:name="../firmware/ipbus/hdl/transactor_sm.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="32"/>
<association xil_pn:name="Implementation" xil_pn:seqID="7"/>
</file>
<file xil_pn:name="../firmware/ipbus/hdl/transactor_tx.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="33"/>
<association xil_pn:name="Implementation" xil_pn:seqID="6"/>
</file>
<file xil_pn:name="../firmware/ipbus/hdl/transactor.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="34"/>
<association xil_pn:name="Implementation" xil_pn:seqID="19"/>
</file>
<file xil_pn:name="../firmware/ipbus/hdl/udp_shim.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="35"/>
<association xil_pn:name="Implementation" xil_pn:seqID="18"/>
</file>
<file xil_pn:name="../firmware/ethernet/hdl/emac_hostbus_decl.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="36"/>
<association xil_pn:name="Implementation" xil_pn:seqID="28"/>
</file>
<file xil_pn:name="../firmware/ethernet/hdl/eth_s6_gmii.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="37"/>
<association xil_pn:name="Implementation" xil_pn:seqID="39"/>
</file>
<file xil_pn:name="../firmware/ethernet/hdl/mac_arbiter_decl.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="38"/>
<association xil_pn:name="Implementation" xil_pn:seqID="0"/>
</file>
<file xil_pn:name="../firmware/ipbus/hdl/slaves/ipbus_emac_hostbus.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="40"/>
<association xil_pn:name="Implementation" xil_pn:seqID="36"/>
</file>
<file xil_pn:name="ipcore_dir/dpram_8x12_32x10.xco" xil_pn:type="FILE_COREGEN">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="42"/>
<association xil_pn:name="Implementation" xil_pn:seqID="1"/>
</file>
<file xil_pn:name="ipcore_dir/sdpram_8x11.xco" xil_pn:type="FILE_COREGEN">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="51"/>
<association xil_pn:name="Implementation" xil_pn:seqID="5"/>
</file>
<file xil_pn:name="ipcore_dir/soft_emac_gmii_4_5.xco" xil_pn:type="FILE_COREGEN">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="59"/>
<association xil_pn:name="Implementation" xil_pn:seqID="15"/>
</file>
<file xil_pn:name="../firmware/example_designs/hdl/clock_divider_s6.v" xil_pn:type="FILE_VERILOG">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="67"/>
<association xil_pn:name="Implementation" xil_pn:seqID="27"/>
</file>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/ipbus_addr_decode.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="79"/>
<association xil_pn:name="Implementation" xil_pn:seqID="29"/>
</file>
<file xil_pn:name="../../../ucf/sp601_FMC_mTLU.ucf" xil_pn:type="FILE_UCF">
<association xil_pn:name="Implementation" xil_pn:seqID="0"/>
</file>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/arrivalTimeLUT_rtl.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="132"/>
<association xil_pn:name="Implementation" xil_pn:seqID="46"/>
</file>
<file xil_pn:name="ipcore_dir/tlu_event_fifo.xco" xil_pn:type="FILE_COREGEN">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="164"/>
<association xil_pn:name="Implementation" xil_pn:seqID="33"/>
</file>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/registerCounter_rtl.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="172"/>
<association xil_pn:name="Implementation" xil_pn:seqID="40"/>
</file>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/i2c_master_rtl.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="173"/>
<association xil_pn:name="Implementation" xil_pn:seqID="51"/>
</file>
<file xil_pn:name="../../IPbusFirmware/firmware/external/opencores_i2c/i2c_master_bit_ctrl.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="174"/>
<association xil_pn:name="Implementation" xil_pn:seqID="13"/>
</file>
<file xil_pn:name="../../IPbusFirmware/firmware/external/opencores_i2c/i2c_master_byte_ctrl.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="175"/>
<association xil_pn:name="Implementation" xil_pn:seqID="12"/>
</file>
<file xil_pn:name="../../IPbusFirmware/firmware/external/opencores_i2c/i2c_master_registers.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="176"/>
<association xil_pn:name="Implementation" xil_pn:seqID="11"/>
</file>
<file xil_pn:name="../../IPbusFirmware/firmware/external/opencores_i2c/i2c_master_top.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="177"/>
<association xil_pn:name="Implementation" xil_pn:seqID="31"/>
</file>
<file xil_pn:name="ipcore_dir/internalTriggerGenerator.xco" xil_pn:type="FILE_COREGEN">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="226"/>
<association xil_pn:name="Implementation" xil_pn:seqID="34"/>
</file>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/GPP_ipb_rtl.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="102"/>
<association xil_pn:name="Implementation" xil_pn:seqID="52"/>
</file>
<file xil_pn:name="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/GPP_rtl.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="103"/>
<association xil_pn:name="Implementation" xil_pn:seqID="42"/>
</file>
<file xil_pn:name="ipcore_dir/CounterUp.xco" xil_pn:type="FILE_COREGEN">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="104"/>
<association xil_pn:name="Implementation" xil_pn:seqID="16"/>
</file>
<file xil_pn:name="ipcore_dir/CounterDown.xco" xil_pn:type="FILE_COREGEN">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="110"/>
<association xil_pn:name="Implementation" xil_pn:seqID="17"/>
</file>
<file xil_pn:name="ipcore_dir/FIFO.xco" xil_pn:type="FILE_COREGEN">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="99"/>
<association xil_pn:name="Implementation" xil_pn:seqID="35"/>
</file>
<file xil_pn:name="Reg_2clks.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="154"/>
<association xil_pn:name="Implementation" xil_pn:seqID="14"/>
</file>
<file xil_pn:name="sync_reg.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="155"/>
<association xil_pn:name="Implementation" xil_pn:seqID="32"/>
</file>
<file xil_pn:name="ipcore_dir/dpram_8x12_32x10.xise" xil_pn:type="FILE_COREGENISE">
<association xil_pn:name="Implementation" xil_pn:seqID="0"/>
</file>
<file xil_pn:name="ipcore_dir/sdpram_8x11.xise" xil_pn:type="FILE_COREGENISE">
<association xil_pn:name="Implementation" xil_pn:seqID="0"/>
</file>
<file xil_pn:name="ipcore_dir/soft_emac_gmii_4_5.xise" xil_pn:type="FILE_COREGENISE">
<association xil_pn:name="Implementation" xil_pn:seqID="0"/>
</file>
<file xil_pn:name="ipcore_dir/tlu_event_fifo.xise" xil_pn:type="FILE_COREGENISE">
<association xil_pn:name="Implementation" xil_pn:seqID="0"/>
</file>
<file xil_pn:name="ipcore_dir/internalTriggerGenerator.xise" xil_pn:type="FILE_COREGENISE">
<association xil_pn:name="Implementation" xil_pn:seqID="0"/>
</file>
<file xil_pn:name="ipcore_dir/CounterUp.xise" xil_pn:type="FILE_COREGENISE">
<association xil_pn:name="Implementation" xil_pn:seqID="0"/>
</file>
<file xil_pn:name="ipcore_dir/CounterDown.xise" xil_pn:type="FILE_COREGENISE">
<association xil_pn:name="Implementation" xil_pn:seqID="0"/>
</file>
<file xil_pn:name="ipcore_dir/FIFO.xise" xil_pn:type="FILE_COREGENISE">
<association xil_pn:name="Implementation" xil_pn:seqID="0"/>
</file>
</files>
<properties>
<property xil_pn:name="AES Initial Vector spartan6" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="AES Key (Hex String) spartan6" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Add I/O Buffers" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Allow Logic Optimization Across Hierarchy" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Allow SelectMAP Pins to Persist" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Allow Unexpanded Blocks" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Allow Unmatched LOC Constraints" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Allow Unmatched Timing Group Constraints" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Analysis Effort Level" xil_pn:value="Standard" xil_pn:valueState="default"/>
<property xil_pn:name="Asynchronous To Synchronous" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Auto Implementation Compile Order" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Auto Implementation Top" xil_pn:value="false" xil_pn:valueState="non-default"/>
<property xil_pn:name="Automatic BRAM Packing" xil_pn:value="true" xil_pn:valueState="non-default" xil_pn:x_locked="true"/>
<property xil_pn:name="Automatically Insert glbl Module in the Netlist" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Automatically Run Generate Target PROM/ACE File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="BRAM Utilization Ratio" xil_pn:value="100" xil_pn:valueState="default"/>
<property xil_pn:name="Bring Out Global Set/Reset Net as a Port" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Bring Out Global Tristate Net as a Port" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Bus Delimiter" xil_pn:value="&lt;>" xil_pn:valueState="default"/>
<property xil_pn:name="Case" xil_pn:value="Maintain" xil_pn:valueState="default"/>
<property xil_pn:name="Case Implementation Style" xil_pn:value="None" xil_pn:valueState="default"/>
<property xil_pn:name="Change Device Speed To" xil_pn:value="-2" xil_pn:valueState="default"/>
<property xil_pn:name="Change Device Speed To Post Trace" xil_pn:value="-2" xil_pn:valueState="default"/>
<property xil_pn:name="Combinatorial Logic Optimization" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Compile EDK Simulation Library" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Compile SIMPRIM (Timing) Simulation Library" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Compile UNISIM (Functional) Simulation Library" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Compile XilinxCoreLib (CORE Generator) Simulation Library" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Compile for HDL Debugging" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Clk (Configuration Pins)" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Pin Done" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Pin M0" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Pin M1" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Pin M2" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Pin Program" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Rate spartan6" xil_pn:value="2" xil_pn:valueState="default"/>
<property xil_pn:name="Correlate Output to Input Design" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create ASCII Configuration File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create Binary Configuration File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create Bit File" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Create I/O Pads from Ports" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create IEEE 1532 Configuration File spartan6" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create Logic Allocation File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create Mask File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create ReadBack Data Files" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Cross Clock Analysis" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="DSP Utilization Ratio" xil_pn:value="100" xil_pn:valueState="default"/>
<property xil_pn:name="Delay Values To Be Read from SDF" xil_pn:value="Setup Time" xil_pn:valueState="default"/>
<property xil_pn:name="Device" xil_pn:value="xc6slx16" xil_pn:valueState="non-default"/>
<property xil_pn:name="Device Family" xil_pn:value="Spartan6" xil_pn:valueState="non-default"/>
<property xil_pn:name="Device Speed Grade/Select ABS Minimum" xil_pn:value="-2" xil_pn:valueState="default"/>
<property xil_pn:name="Disable Detailed Package Model Insertion" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Do Not Escape Signal and Instance Names in Netlist" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Done (Output Events)" xil_pn:value="Default (4)" xil_pn:valueState="default"/>
<property xil_pn:name="Drive Awake Pin During Suspend/Wake Sequence spartan6" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Drive Done Pin High" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Enable BitStream Compression" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Cyclic Redundancy Checking (CRC) spartan6" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Debugging of Serial Mode BitStream" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Enable External Master Clock spartan6" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Hardware Co-Simulation" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Internal Done Pipe" xil_pn:value="true" xil_pn:valueState="non-default"/>
<property xil_pn:name="Enable Message Filtering" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Multi-Pin Wake-Up Suspend Mode spartan6" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Multi-Threading" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Multi-Threading par spartan6" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Outputs (Output Events)" xil_pn:value="Default (5)" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Suspend/Wake Global Set/Reset spartan6" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Encrypt Bitstream spartan6" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Encrypt Key Select spartan6" xil_pn:value="BBRAM" xil_pn:valueState="default"/>
<property xil_pn:name="Equivalent Register Removal Map" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Equivalent Register Removal XST" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Essential Bits" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Evaluation Development Board" xil_pn:value="Spartan-6 SP601 Evaluation Platform" xil_pn:valueState="non-default"/>
<property xil_pn:name="Exclude Compilation of Deprecated EDK Cores" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Exclude Compilation of EDK Sub-Libraries" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Extra Cost Tables Map" xil_pn:value="0" xil_pn:valueState="default"/>
<property xil_pn:name="Extra Effort (Highest PAR level only)" xil_pn:value="Normal" xil_pn:valueState="non-default"/>
<property xil_pn:name="FPGA Start-Up Clock" xil_pn:value="CCLK" xil_pn:valueState="default"/>
<property xil_pn:name="FSM Encoding Algorithm" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="FSM Style" xil_pn:value="LUT" xil_pn:valueState="default"/>
<property xil_pn:name="Filter Files From Compile Order" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Flatten Output Netlist" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Functional Model Target Language ArchWiz" xil_pn:value="VHDL" xil_pn:valueState="default"/>
<property xil_pn:name="Functional Model Target Language Coregen" xil_pn:value="VHDL" xil_pn:valueState="default"/>
<property xil_pn:name="Functional Model Target Language Schematic" xil_pn:value="VHDL" xil_pn:valueState="default"/>
<property xil_pn:name="GTS Cycle During Suspend/Wakeup Sequence spartan6" xil_pn:value="4" xil_pn:valueState="default"/>
<property xil_pn:name="GWE Cycle During Suspend/Wakeup Sequence spartan6" xil_pn:value="5" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Architecture Only (No Entity Declaration)" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Asynchronous Delay Report" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Clock Region Report" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Constraints Interaction Report" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Constraints Interaction Report Post Trace" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Datasheet Section" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Datasheet Section Post Trace" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Detailed MAP Report" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Multiple Hierarchical Netlist Files" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Post-Place &amp; Route Power Report" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Post-Place &amp; Route Simulation Model" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate RTL Schematic" xil_pn:value="Yes" xil_pn:valueState="default"/>
<property xil_pn:name="Generate SAIF File for Power Optimization/Estimation Par" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Testbench File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Timegroups Section" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Timegroups Section Post Trace" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generics, Parameters" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Global Optimization Goal" xil_pn:value="AllClockNets" xil_pn:valueState="default"/>
<property xil_pn:name="Global Optimization map spartan6" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Global Set/Reset Port Name" xil_pn:value="GSR_PORT" xil_pn:valueState="default"/>
<property xil_pn:name="Global Tristate Port Name" xil_pn:value="GTS_PORT" xil_pn:valueState="default"/>
<property xil_pn:name="Hierarchy Separator" xil_pn:value="/" xil_pn:valueState="default"/>
<property xil_pn:name="ISim UUT Instance Name" xil_pn:value="UUT" xil_pn:valueState="default"/>
<property xil_pn:name="Ignore User Timing Constraints Map" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Ignore User Timing Constraints Par" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Implementation Top" xil_pn:value="Architecture|top_extphy|struct" xil_pn:valueState="non-default"/>
<property xil_pn:name="Implementation Top File" xil_pn:value="../../../hdl_designer/fmc_mTLU/fmc_mTLU_lib/hdl/top_extphy_struct.vhd" xil_pn:valueState="non-default"/>
<property xil_pn:name="Implementation Top Instance Path" xil_pn:value="/top_extphy" xil_pn:valueState="non-default"/>
<property xil_pn:name="Include 'uselib Directive in Verilog File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Include SIMPRIM Models in Verilog File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Include UNISIM Models in Verilog File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Include sdf_annotate task in Verilog File" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Incremental Compilation" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Insert Buffers to Prevent Pulse Swallowing" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Instantiation Template Target Language Xps" xil_pn:value="VHDL" xil_pn:valueState="default"/>
<property xil_pn:name="JTAG Pin TCK" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="JTAG Pin TDI" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="JTAG Pin TDO" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="JTAG Pin TMS" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Keep Hierarchy" xil_pn:value="No" xil_pn:valueState="default"/>
<property xil_pn:name="LUT Combining Map" xil_pn:value="Auto" xil_pn:valueState="non-default" xil_pn:x_locked="true"/>
<property xil_pn:name="LUT Combining Xst" xil_pn:value="Auto" xil_pn:valueState="default" xil_pn:x_locked="true"/>
<property xil_pn:name="Language" xil_pn:value="VHDL" xil_pn:valueState="default"/>
<property xil_pn:name="Last Applied Goal" xil_pn:value="Area Reduction" xil_pn:valueState="non-default"/>
<property xil_pn:name="Last Applied Strategy" xil_pn:value="strategy1;/opt/Xilinx/13.4/ISE_DS/ISE/spartan6/data/spartan6_area_strategy1.xds" xil_pn:valueState="non-default"/>
<property xil_pn:name="Last Unlock Status" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Launch SDK after Export" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Library for Verilog Sources" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Load glbl" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Manual Implementation Compile Order" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Map Slice Logic into Unused Block RAMs" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Mask Pins for Multi-Pin Wake-Up Suspend Mode spartan6" xil_pn:value="0x00" xil_pn:valueState="default"/>
<property xil_pn:name="Max Fanout" xil_pn:value="100000" xil_pn:valueState="default" xil_pn:x_locked="true"/>
<property xil_pn:name="Maximum Compression" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Maximum Number of Lines in Report" xil_pn:value="1000" xil_pn:valueState="default"/>
<property xil_pn:name="Maximum Signal Name Length" xil_pn:value="20" xil_pn:valueState="default"/>
<property xil_pn:name="Move First Flip-Flop Stage" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Move Last Flip-Flop Stage" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="MultiBoot: Insert IPROG CMD in the Bitfile spartan6" xil_pn:value="Enable" xil_pn:valueState="default"/>
<property xil_pn:name="MultiBoot: Next Configuration Mode spartan6" xil_pn:value="001" xil_pn:valueState="default"/>
<property xil_pn:name="MultiBoot: Starting Address for Golden Configuration spartan6" xil_pn:value="0x00000000" xil_pn:valueState="default"/>
<property xil_pn:name="MultiBoot: Starting Address for Next Configuration spartan6" xil_pn:value="0x00000000" xil_pn:valueState="default"/>
<property xil_pn:name="MultiBoot: Use New Mode for Next Configuration spartan6" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="MultiBoot: User-Defined Register for Failsafe Scheme spartan6" xil_pn:value="0x0000" xil_pn:valueState="default"/>
<property xil_pn:name="Netlist Hierarchy" xil_pn:value="As Optimized" xil_pn:valueState="default"/>
<property xil_pn:name="Netlist Translation Type" xil_pn:value="Timestamp" xil_pn:valueState="default"/>
<property xil_pn:name="Number of Clock Buffers" xil_pn:value="16" xil_pn:valueState="default"/>
<property xil_pn:name="Number of Paths in Error/Verbose Report" xil_pn:value="3" xil_pn:valueState="default"/>
<property xil_pn:name="Number of Paths in Error/Verbose Report Post Trace" xil_pn:value="3" xil_pn:valueState="default"/>
<property xil_pn:name="Optimization Effort spartan6" xil_pn:value="Normal" xil_pn:valueState="default" xil_pn:x_locked="true"/>
<property xil_pn:name="Optimization Goal" xil_pn:value="Area" xil_pn:valueState="non-default" xil_pn:x_locked="true"/>
<property xil_pn:name="Optimize Instantiated Primitives" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Other Bitgen Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Bitgen Command Line Options spartan6" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Compiler Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Compiler Options Map" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Compiler Options Par" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Compiler Options Translate" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Compxlib Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Map Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other NETGEN Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Ngdbuild Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Place &amp; Route Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Simulator Commands Behavioral" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Simulator Commands Post-Map" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Simulator Commands Post-Route" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Simulator Commands Post-Translate" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other XPWR Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other XST Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Output Extended Identifiers" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Output File Name" xil_pn:value="top_extphy" xil_pn:valueState="default"/>
<property xil_pn:name="Overwrite Compiled Libraries" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Pack I/O Registers into IOBs" xil_pn:value="Yes" xil_pn:valueState="non-default" xil_pn:x_locked="true"/>
<property xil_pn:name="Pack I/O Registers/Latches into IOBs" xil_pn:value="For Inputs and Outputs" xil_pn:valueState="non-default" xil_pn:x_locked="true"/>
<property xil_pn:name="Package" xil_pn:value="csg324" xil_pn:valueState="default"/>
<property xil_pn:name="Perform Advanced Analysis" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Perform Advanced Analysis Post Trace" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Perform Timing-Driven Packing and Placement" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Place &amp; Route Effort Level (Overall)" xil_pn:value="High" xil_pn:valueState="default" xil_pn:x_locked="true"/>
<property xil_pn:name="Place And Route Mode" xil_pn:value="Normal Place and Route" xil_pn:valueState="default"/>
<property xil_pn:name="Place MultiBoot Settings into Bitstream spartan6" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Placer Effort Level Map" xil_pn:value="High" xil_pn:valueState="default" xil_pn:x_locked="true"/>
<property xil_pn:name="Placer Extra Effort Map" xil_pn:value="Normal" xil_pn:valueState="non-default"/>
<property xil_pn:name="Port to be used" xil_pn:value="Auto - default" xil_pn:valueState="default"/>
<property xil_pn:name="Post Map Simulation Model Name" xil_pn:value="top_extphy_map.vhd" xil_pn:valueState="default"/>
<property xil_pn:name="Post Place &amp; Route Simulation Model Name" xil_pn:value="top_extphy_timesim.vhd" xil_pn:valueState="default"/>
<property xil_pn:name="Post Synthesis Simulation Model Name" xil_pn:value="top_extphy_synthesis.vhd" xil_pn:valueState="default"/>
<property xil_pn:name="Post Translate Simulation Model Name" xil_pn:value="top_extphy_translate.vhd" xil_pn:valueState="default"/>
<property xil_pn:name="Power Reduction Map spartan6" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Power Reduction Par" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Power Reduction Xst" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Preferred Language" xil_pn:value="VHDL" xil_pn:valueState="non-default"/>
<property xil_pn:name="Produce Verbose Report" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Project Description" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Property Specification in Project File" xil_pn:value="Store all values" xil_pn:valueState="default"/>
<property xil_pn:name="RAM Extraction" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="RAM Style" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="ROM Extraction" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="ROM Style" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Read Cores" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Reduce Control Sets" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Regenerate Core" xil_pn:value="Under Current Project Setting" xil_pn:valueState="default"/>
<property xil_pn:name="Register Balancing" xil_pn:value="No" xil_pn:valueState="default" xil_pn:x_locked="true"/>
<property xil_pn:name="Register Duplication Map" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Register Duplication Xst" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Register Ordering spartan6" xil_pn:value="4" xil_pn:valueState="default"/>
<property xil_pn:name="Release Write Enable (Output Events)" xil_pn:value="Default (6)" xil_pn:valueState="default"/>
<property xil_pn:name="Rename Design Instance in Testbench File to" xil_pn:value="UUT" xil_pn:valueState="default"/>
<property xil_pn:name="Rename Top Level Architecture To" xil_pn:value="Structure" xil_pn:valueState="default"/>
<property xil_pn:name="Rename Top Level Entity to" xil_pn:value="top_extphy" xil_pn:valueState="default"/>
<property xil_pn:name="Rename Top Level Module To" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Report Fastest Path(s) in Each Constraint" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Report Fastest Path(s) in Each Constraint Post Trace" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Report Paths by Endpoint" xil_pn:value="3" xil_pn:valueState="default"/>
<property xil_pn:name="Report Paths by Endpoint Post Trace" xil_pn:value="3" xil_pn:valueState="default"/>
<property xil_pn:name="Report Type" xil_pn:value="Verbose Report" xil_pn:valueState="default"/>
<property xil_pn:name="Report Type Post Trace" xil_pn:value="Verbose Report" xil_pn:valueState="default"/>
<property xil_pn:name="Report Unconstrained Paths" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Report Unconstrained Paths Post Trace" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Reset On Configuration Pulse Width" xil_pn:value="100" xil_pn:valueState="default"/>
<property xil_pn:name="Resource Sharing" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Retain Hierarchy" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Retry Configuration if CRC Error Occurs spartan6" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Revision Select" xil_pn:value="00" xil_pn:valueState="default"/>
<property xil_pn:name="Revision Select Tristate" xil_pn:value="Disable" xil_pn:valueState="default"/>
<property xil_pn:name="Run Design Rules Checker (DRC)" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Run for Specified Time" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Run for Specified Time Map" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Run for Specified Time Par" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Run for Specified Time Translate" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Safe Implementation" xil_pn:value="No" xil_pn:valueState="default"/>
<property xil_pn:name="Security" xil_pn:value="Enable Readback and Reconfiguration" xil_pn:valueState="default"/>
<property xil_pn:name="Selected Simulation Root Source Node Behavioral" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Selected Simulation Root Source Node Post-Map" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Selected Simulation Root Source Node Post-Route" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Selected Simulation Root Source Node Post-Translate" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Selected Simulation Source Node" xil_pn:value="UUT" xil_pn:valueState="default"/>
<property xil_pn:name="Set SPI Configuration Bus Width spartan6" xil_pn:value="1" xil_pn:valueState="default"/>
<property xil_pn:name="Setup External Master Clock Division spartan6" xil_pn:value="1" xil_pn:valueState="default"/>
<property xil_pn:name="Shift Register Extraction" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Shift Register Minimum Size spartan6" xil_pn:value="2" xil_pn:valueState="default"/>
<property xil_pn:name="Show All Models" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Simulation Model Target" xil_pn:value="VHDL" xil_pn:valueState="default"/>
<property xil_pn:name="Simulation Run Time ISim" xil_pn:value="1000 ns" xil_pn:valueState="default"/>
<property xil_pn:name="Simulation Run Time Map" xil_pn:value="1000 ns" xil_pn:valueState="default"/>
<property xil_pn:name="Simulation Run Time Par" xil_pn:value="1000 ns" xil_pn:valueState="default"/>
<property xil_pn:name="Simulation Run Time Translate" xil_pn:value="1000 ns" xil_pn:valueState="default"/>
<property xil_pn:name="Simulator" xil_pn:value="ISim (VHDL/Verilog)" xil_pn:valueState="default"/>
<property xil_pn:name="Slice Utilization Ratio" xil_pn:value="100" xil_pn:valueState="default"/>
<property xil_pn:name="Specify 'define Macro Name and Value" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Specify Top Level Instance Names Behavioral" xil_pn:value="Default" xil_pn:valueState="default"/>
<property xil_pn:name="Specify Top Level Instance Names Post-Map" xil_pn:value="Default" xil_pn:valueState="default"/>
<property xil_pn:name="Specify Top Level Instance Names Post-Route" xil_pn:value="Default" xil_pn:valueState="default"/>
<property xil_pn:name="Specify Top Level Instance Names Post-Translate" xil_pn:value="Default" xil_pn:valueState="default"/>
<property xil_pn:name="Speed Grade" xil_pn:value="-2" xil_pn:valueState="non-default"/>
<property xil_pn:name="Starting Placer Cost Table (1-100) Map spartan6" xil_pn:value="1" xil_pn:valueState="default"/>
<property xil_pn:name="Synthesis Tool" xil_pn:value="XST (VHDL/Verilog)" xil_pn:valueState="default"/>
<property xil_pn:name="Target Simulator" xil_pn:value="Please Specify" xil_pn:valueState="default"/>
<property xil_pn:name="Timing Mode Map" xil_pn:value="Performance Evaluation" xil_pn:valueState="default"/>
<property xil_pn:name="Timing Mode Par" xil_pn:value="Performance Evaluation" xil_pn:valueState="default"/>
<property xil_pn:name="Top-Level Module Name in Output Netlist" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Top-Level Source Type" xil_pn:value="HDL" xil_pn:valueState="default"/>
<property xil_pn:name="Trim Unconnected Signals" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Tristate On Configuration Pulse Width" xil_pn:value="0" xil_pn:valueState="default"/>
<property xil_pn:name="Unused IOB Pins" xil_pn:value="Pull Down" xil_pn:valueState="default"/>
<property xil_pn:name="Use 64-bit PlanAhead on 64-bit Systems" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Use Clock Enable" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Project File Behavioral" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Project File Post-Map" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Project File Post-Route" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Project File Post-Translate" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Simulation Command File Behavioral" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Simulation Command File Map" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Simulation Command File Par" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Simulation Command File Translate" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Waveform Configuration File Behav" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Waveform Configuration File Map" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Waveform Configuration File Par" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Waveform Configuration File Translate" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use DSP Block spartan6" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Use LOC Constraints" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Use RLOC Constraints" xil_pn:value="Yes" xil_pn:valueState="default"/>
<property xil_pn:name="Use Smart Guide" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Synchronous Reset" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Use Synchronous Set" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Use Synthesis Constraints File" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="User Browsed Strategy Files" xil_pn:value="/opt/Xilinx/13.4/ISE_DS/ISE/spartan6/data/spartan6_performance_with_iobpacking.xds" xil_pn:valueState="non-default"/>
<property xil_pn:name="UserID Code (8 Digit Hexadecimal)" xil_pn:value="0xFFFFFFFF" xil_pn:valueState="default"/>
<property xil_pn:name="VCCAUX Voltage Level spartan6" xil_pn:value="2.5V" xil_pn:valueState="default"/>
<property xil_pn:name="VHDL Source Analysis Standard" xil_pn:value="VHDL-200X" xil_pn:valueState="non-default"/>
<property xil_pn:name="Value Range Check" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Verilog Macros" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Wait for DCM and PLL Lock (Output Events) spartan6" xil_pn:value="Default (NoWait)" xil_pn:valueState="default"/>
<property xil_pn:name="Wakeup Clock spartan6" xil_pn:value="Startup Clock" xil_pn:valueState="default"/>
<property xil_pn:name="Watchdog Timer Value spartan6" xil_pn:value="0xFFFF" xil_pn:valueState="default"/>
<property xil_pn:name="Working Directory" xil_pn:value="." xil_pn:valueState="non-default"/>
<property xil_pn:name="Write Timing Constraints" xil_pn:value="false" xil_pn:valueState="default"/>
<!-- -->
<!-- The following properties are for internal use only. These should not be modified.-->
<!-- -->
<property xil_pn:name="PROP_BehavioralSimTop" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_DesignName" xil_pn:value="fmcTLU_v1" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_DevFamilyPMName" xil_pn:value="spartan6" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_FPGAConfiguration" xil_pn:value="FPGAConfiguration" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_PostMapSimTop" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_PostParSimTop" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_PostSynthSimTop" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_PostXlateSimTop" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_PreSynthesis" xil_pn:value="PreSynthesis" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_intProjectCreationTimestamp" xil_pn:value="2012-11-20T09:59:25" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_intWbtProjectID" xil_pn:value="5B4160A48D5521B60FEAADD3AB81D9BF" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_intWorkingDirLocWRTProjDir" xil_pn:value="Same" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_intWorkingDirUsed" xil_pn:value="No" xil_pn:valueState="non-default"/>
</properties>
<bindings>
<binding xil_pn:location="/top_extphy" xil_pn:name="../../../ucf/sp601_FMC_mTLU.ucf"/>
</bindings>
<libraries/>
<autoManagedFiles>
<!-- The following files are identified by `include statements in verilog -->
<!-- source files and are automatically managed by Project Navigator. -->
<!-- -->
<!-- Do not hand-edit this section, as it will be overwritten when the -->
<!-- project is analyzed based on files automatically identified as -->
<!-- include files. -->
<file xil_pn:name="../firmware/ipbus/hdl/ipbus_v_defs.v" xil_pn:type="FILE_VERILOG"/>
</autoManagedFiles>
</project>
scripts/build_bitstream.sh 0 → 100644
View file @ 35f89bff
#!/bin/sh
#
# Script to build firmware for FMC-based AIDA mini-TLU
#
# This script builds the bitstream using ISE and the ISE project generated
# by setup_workspace.sh
#
# cd to the working directory and execute this script....
#
# David Cussans, December 2013
#
export BOARD_TYPE=sp601
export ISE_VER=ise14
export FW_WORKSPACE=`pwd`
echo "Workspace directory = " ${FW_WORKSPACE}/workspace
TLUDir=`pwd`/fmc-mtlu
echo "Directory with TLU source files = ${TLUDir}"
pushd $FW_WORKSPACE/workspace
xtclsh $TLUDir/firmware/config/$ISE_VER/$BOARD_TYPE/build_bitstream.tcl
echo "Bitstream built in ${FW_WORKSPACE}/workspace"
popd
scripts/setup_workspace.sh 0 → 100644
View file @ 35f89bff
#!/bin/sh
#
# Script to build firmware for FMC-based AIDA mini-TLU
#
# This script creates an ISE project.
#
# Create a working directory and execute this script....
#
# Once project has been created either open in ISE or
# execute the build_bitstream.sh script.
#
# David Cussans, December 2013
#
export FW_WORKSPACE=`pwd`
echo "Current directory = " $FW_WORKSPACE
export BOARD_TYPE=sp601
export ISE_VER=ise14
export VERSION=branches/dgc_scripted_build_ipbus2
echo "Setting up AIDA mini-TLU code version $VERSION"
# Check out FMC-MTLU code
TLUDir=`pwd`/fmc-mtlu
if [ ! -d "$TLUDir" ]; then
echo "Checking out AIDA mini-TLU code"
mkdir fmc-mtlu
pushd fmc-mtlu
svn co http://svn.ohwr.org/fmc-mtlu/${VERSION}/firmware
popd
echo "Checked out FMC-MTLU code"
fi
# Check out IPBus code
IPBusDir=`pwd`/IPBus2
if [ ! -d "$IPBusDir" ]; then
mkdir $IPBusDir
pushd $IPBusDir
svn co http://svn.cern.ch/guest/cactus/tags/ipbus_2_0_v1/firmware
echo "Checked out IPBus2 code"
popd
fi
# Check out directory for external cores ( e.g. I2C)
if [ ! -d "external" ]; then
echo "Checking out I2C code"
svn co http://cactus.hepforge.org/svn/tags/firmware_pre_131_RAL/firmware/external
fi
# Create a directory contain the build products.
WorkDir=workspace
if [ ! -d "$WorkDir" ]; then
mkdir workspace
mkdir workspace/ipcore_dir
echo "Made workspace"
fi
export REPOS_BUILD_DIR=`pwd`/workspace
pushd workspace
# Create soft links to ipbus, fmc-mtlu code , i2c code
if [ ! -e "ipbus" ]; then
ln -s $IPBusDir ipbus
fi
if [ ! -e "fmc-mtlu" ]; then
ln -s ../fmc-mtlu .
fi
if [ ! -e "external" ]; then
ln -s ../external .
fi
if [ ! -e "file_list" ]; then
ln -s $TLUDir/firmware/config/$ISE_VER/$BOARD_TYPE/file_list .
fi
if [ ! -e "ipbus" ]; then
ln -s ../$IPBusDir/firmware/config/$ISE_VER/$BOARD_TYPE/file_list .
fi
pushd ipcore_dir
if [ ! -e "coregen.cgp" ]; then
ln -s $TLUDir/firmware/config/$ISE_VER/$BOARD_TYPE/coregen.cgp .
fi
popd
#export REPOS_FW_DIR=$IPBusDir
export REPOS_FW_DIR=ipbus
echo "IPBus directory = " $IPBusDir
echo "FMC-MTLU directry = " $TLUDir
xtclsh $TLUDir/firmware/config/$ISE_VER/$BOARD_TYPE/setup_project.tcl
echo "Finished setting up ISE project."
echo "Open in $ISE_VER and build bit-stream ,or execute build_bitstream.sh"
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment