[General] MGT routing
- Rule for clearance for high speed lines is not set properly. So not all net objects (vias for eg) respect 0.5mm clearance.
- MGT lines are sometimes routed in the vicinity of reference plane voids. Eg Via cut outs. Should be away of voids at least 0.2mm (roughly 1.5 times the width of the track)and 2mm (~>70mils ) from cut outs
- Some MGT lines are changing from microstrip on bottom layer to stripline on internal layer L12 without having ground vias on the vicinity: SLOT8_MGT.MGT_Rx, SLOT7_MGT.MGT_Rx, SLOT6_MGT.MGT_Rx, SLOT5_MGT.MGT_Rx, SLOT4_MGT.MGT_Rx, SLOT3_MGT.MGT_Rx, SLOT2_MGT.MGT_Rx