Commits · adam-10g-test · Projects / DIOT Zynq Ultrascale-based System Board

16 Nov, 2021 1 commit
- sw/configs/device-tree: test for 10G link, generate 156250000Hz on clk out0 · 30370c32
  Adam Wujek authored Nov 16, 2021
```
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
```
  30370c32
07 Nov, 2021 4 commits

sw/petalinux/diot-util: cosmetic changes at startup · 2a497674
Adam Wujek authored Nov 07, 2021
```
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
```
2a497674

sw/configs/uboot: reduce timeout on PHY auto negotiation · 2faa3879

Adam Wujek authored Nov 06, 2021

Timeout when the link is not connected. E.g.:
ethernet@ff0b0000 Waiting for PHY auto negotiation to complete..................... TIMEOUT !
Signed-off-by: Adam Wujek <dev_public@wujek.eu>

2faa3879

sw/configs/uboot: skip netwok booting if IP not assigned · 4b42e13d
Adam Wujek authored Nov 06, 2021
```
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
```
4b42e13d

sw/petalinux/diot-util: limit number of errors when PSU1, PSU2 or FAN is not inserted · 5794e1cf

Adam Wujek authored Nov 07, 2021

Now errors are limited to:
ERRORS:
WARNING: PSU1 not present
WARNING: PSU2 not present
WARNING: FAN module not present
Signed-off-by: Adam Wujek <dev_public@wujek.eu>

5794e1cf

05 Nov, 2021 4 commits
- sw/petalinux/diot-util: fix descriptions in status command · 68f559a9
  Adam Wujek authored Nov 05, 2021
```
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
```
  68f559a9
- sw/petalinux/diot-util: display clocks in MHz not Hz · a9dcef84
  Adam Wujek authored Nov 05, 2021
```
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
```
  a9dcef84
- sw/Makefile: support different names of .bit files in .xsa file · 32e229a1
  Adam Wujek authored Nov 05, 2021
```
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
```
  32e229a1
- sw/Makefile: compile ATF only with one job · 45521770
  Adam Wujek authored Nov 05, 2021
```
There were observerd rare errors during the build of ATF
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
```
  45521770
04 Nov, 2021 31 commits
- Merge branch 'sw support' · bc0a9f52
  Grzegorz Daniluk authored Nov 04, 2021
  
  bc0a9f52
- sw/petalinux/diot-util: fix display errors when running sensors_refresh · 8e76d7ef
  Adam Wujek authored Nov 04, 2021
```
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
```
  8e76d7ef
- sw/petalinux/diot-util: restore i2c-3 · ae495b25
  Adam Wujek authored Nov 04, 2021
```
Removal or insertion of PSU can caus problems on i2c-3 bus. These
changes tries to recover i2c-3 bus after problematic state is entered.
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
```
  ae495b25
- sw/petalinux/diot-util: Add 200ms delay after PSU insertion is detected · 474fcd67
  Adam Wujek authored Nov 03, 2021
```
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
```
  474fcd67
- sw/Makefile: fix lack of build after symlink to GW file changed · df33da8f
  Adam Wujek authored Nov 02, 2021
```
If a dependency is a symlink, make by default checks the timestamp of
a file that symlink points to. With the GW file, we want to check
the timestamp of a symlink and a destination file. The added parameter to
the make exactly does that.
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
```
  df33da8f
- sw/petalinux/diot-util: fix command sensors_refresh · 961f5982
  Adam Wujek authored Oct 25, 2021
```
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
```
  961f5982
- sw/petalinux/diot-util: small fixes · 6fb6343f
  Adam Wujek authored Oct 25, 2021
```
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
```
  6fb6343f
- sw/petalinux/diot-util: clean up sensors_expert · b0d0ef50
  Adam Wujek authored Oct 24, 2021
```
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
```
  b0d0ef50
- sw/petalinux/diot-util: draw read value as a bar · 008d5619
  Adam Wujek authored Oct 24, 2021
```
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
```
  008d5619
- sw/configs/device-tree: add i2c for peripheral boards · 520b4529
  Adam Wujek authored Oct 22, 2021
```
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
```
  520b4529
- sw/configs/device-tree: add FMC's eeprom · cf5ede8a
  Adam Wujek authored Oct 22, 2021
```
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
```
  cf5ede8a
- sw/petalinux/diot-util: fix periperal board detection polarity · 6e157903
  Adam Wujek authored Oct 22, 2021
```
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
```
  6e157903
- sw/petalinux/diot-util: update addresses after i2c master add · e89fd747
  Adam Wujek authored Oct 22, 2021
```
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
```
  e89fd747
- sw/configs/device-tree: update PSU i2c addresses · d80cdcac
  Adam Wujek authored Oct 22, 2021
```
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
```
  d80cdcac
- sw/petalinux/diot-util: remove/add sysfs entries of PSU after removal/insterion · 18a2c098
  Adam Wujek authored Oct 22, 2021
```
This will reduce number of errors printed by a tool
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
```
  18a2c098
- sw/petalinux/diot-util: add FRU readout from periperial boards and FMC · 88e518b1
  Adam Wujek authored Oct 22, 2021
```
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
```
  88e518b1
- sw/petalinux/diot-util: add files to parse FRU information · 54f83f92
  Adam Wujek authored Oct 22, 2021
```
Files copied from:
https://github.com/analogdevicesinc/fru_tools.git
commit:
b3578159 masterfiles: AD-QUADMXFE[2|3]-EBZ-FRU.bin: Add new QuadMxFE FRU binaries
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
```
  54f83f92
- sw/petalinux/diot-util: add support for si5341's clock source · aee9d45b
  Adam Wujek authored Oct 20, 2021
```
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
```
  aee9d45b
- sw/patches/linux: add support for checking input source to si5341 driver · d10c4a55
  Adam Wujek authored Oct 20, 2021
```
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
```
  d10c4a55
- sw/petalinux/diot-util: add support for PSU_ALERT · 825686eb
  Adam Wujek authored Oct 20, 2021
```
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
```
  825686eb
- sw/petalinux/diot-util: fix support for PSUs · 037d0167
  Adam Wujek authored Oct 20, 2021
```
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
```
  037d0167
- sw/petalinux/diot-util: add support for clocks · cb144cf5
  Adam Wujek authored Oct 20, 2021
```
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
```
  cb144cf5
- sw/configs/linux: include Hartmann PSU driver · 8c0ca857
  Adam Wujek authored Oct 20, 2021
```
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
```
  8c0ca857
- sw/patches/linux: add support for Hartmann PSU · a1807bb6
  Adam Wujek authored Oct 20, 2021
```
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
```
  a1807bb6
- sw/petalinux/lm_sensors: add config file for Hartmann PSU · 872aaf21
  Adam Wujek authored Oct 20, 2021
```
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
```
  872aaf21
- sw/configs/device-tree: add definition of reference clock · 1df0bfda
  Adam Wujek authored Oct 20, 2021
```
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
```
  1df0bfda
- sw/petalinux/diot-util: prepare for FAN module · 5fbb0b49
  Adam Wujek authored Oct 19, 2021
```
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
```
  5fbb0b49
- sw/petalinux: change copy-etc recipe into copy-emmcp2 · ee71cc5f
  Adam Wujek authored Oct 18, 2021
```
To copy diot directory from the second partition on eMMC
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
```
  ee71cc5f
- sw/configs/uboot: update boot order · 32cd7ed6
  Adam Wujek authored Oct 18, 2021
```
Boot order:
- get the name of an image from DHCP
- download the pointed image from network
- try to execute it as a script
- try to boot it as an image
- download image.ub via network
- try to execute it as a script
- try to boot is as an image
- try to boot image.ub from microSD
- try to boot image.ub from eMMC
- try to boot from address 0x02040000 from QSPI
- reboot after 3 seconds if no image found
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
```
  32cd7ed6
- sw: update .gitignore · 0bfaa049
  Adam Wujek authored Oct 18, 2021
```
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
```
  0bfaa049
- sw/petalinux: remove gw and gw_all directory · ceea30ff
  Adam Wujek authored Oct 18, 2021
```
xsa files are taken from sw/gw direstory
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
```
  ceea30ff