Commit 2984df80 authored by Paweł Kulik's avatar Paweł Kulik

PCB and BoM fixes

- Added SN74LVC8T245PW footprints as backup if SN74AVC2T245RSWR is not available
- Changed J9 to 2.54mm pitch
- Added NCP51145PDR2G as an alternative to TPS51200DRCT
- Changed footprint of PCA9306
- Added designators on PCB
- Fixed issues highlited during CERN PCB review
- Connected HD3SS3212RKS reserved pins to P3V3 for compatibility with CBTL02043A (allowed in datasheet)
- Added LM2736 as an alternative to TPS6212
- Added resistors to Si549 to allow for any output type (CMOS/LVDS/LVPECL)
parent a7c33f37
This diff is collapsed.
This diff is collapsed.
......@@ -10,20 +10,20 @@
*
*BoardSim has generated this file for you from the Multi Board data
*
RN1_B01, 33.0ohms, , RES-DIP8-SERIES-1
RN3_B01, 33.0ohms, , RES-DIP8-SERIES-1
RN4_B01, 33.0ohms, , RES-DIP8-SERIES-1
RN5_B01, 33.0ohms, , RES-DIP8-SERIES-1
RN6_B01, 33.0ohms, , RES-DIP8-SERIES-1
RN7_B01, 33.0ohms, , RES-DIP8-SERIES-1
RN8_B01, 33.0ohms, , RES-DIP8-SERIES-1
RN2_B01, 30.0ohms, , RES-DIP4-SERIES-1
U10_B01, z41c.ibs, MT40A1G8SA
U8_B01, z41c.ibs, MT40A1G8SA
U7_B01, z41c.ibs, MT40A1G8SA
U6_B01, z41c.ibs, MT40A1G8SA
U5_B01, z41c.ibs, MT40A1G8SA
U4_B01, z41c.ibs, MT40A1G8SA
U3_B01, z41c.ibs, MT40A1G8SA
U2_B01, z41c.ibs, MT40A1G8SA
U9_B01, z41c.ibs, MT40A1G8SA
RN1_B01, 33.0ohms, , RES-DIP8-SERIES-1
RN3_B01, 33.0ohms, , RES-DIP8-SERIES-1
RN4_B01, 33.0ohms, , RES-DIP8-SERIES-1
RN5_B01, 33.0ohms, , RES-DIP8-SERIES-1
RN6_B01, 33.0ohms, , RES-DIP8-SERIES-1
RN7_B01, 33.0ohms, , RES-DIP8-SERIES-1
RN8_B01, 33.0ohms, , RES-DIP8-SERIES-1
RN2_B01, 30.0ohms, , RES-DIP4-SERIES-1
U10_B01, z41c.ibs, MT40A1G8SA
U8_B01, z41c.ibs, MT40A1G8SA
U7_B01, z41c.ibs, MT40A1G8SA
U6_B01, z41c.ibs, MT40A1G8SA
U5_B01, z41c.ibs, MT40A1G8SA
U4_B01, z41c.ibs, MT40A1G8SA
U3_B01, z41c.ibs, MT40A1G8SA
U2_B01, z41c.ibs, MT40A1G8SA
U9_B01, z41c.ibs, MT40A1G8SA
No preview for this file type
No preview for this file type
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment