General: strip README.md, point to the documentation instead

README.md

@@ -8,61 +8,7 @@ populated in time.*
 
 ## Repository structure
 
-Apart from the MoniMod PCB that can be found in the `monimod-pcb`
-directory, there are currently three separate programs in this
-repository:
-
-1. The main FW, that will implement most functionality. This lives in
-   the `main_fw` directory.
-2. The bootloader, that will implement remote programming (it doesn't
-   yet). It lives in the `bootloader` directory.
-3. The simple I2C master written to help develop the main FW lives in
-   the `test_master` directory.
-
-Apart from these four program directories, there is a `common`
-directory that hosts some code that is shared between different
-programs and a `utils` directory that will be used to host some
-general development utilities. There is also a `build` directory which
-hosts a very simple top-level makefile that simply builds and gathers
-all FW binaries in one place.
-
-Each program directory has an `atmel_start_prj` subdirectory: this is
-a testament to the use of the [Atmel START](https://start.atmel.com/)
-tool to generate drivers, other supporting code, linker scripts and
-makefiles. The structure of the generated files has been slightly
-altered, creating the `src`, `include` and `build` subdirectories
-outside of `atmel_start_prj`.
-
-
-## Draft but indicative FW TODO checklist
-
-- [x] Use USB as a terminal to print debug messages and possibly
-      interact with the program
-- [x] Use the ADC to read the output of an
-      [LM61](http://www.ti.com/lit/ds/symlink/lm61.pdf) temperature
-      sensor
-- [x] Develop a simple I2C master to help with the development of the
-      main FW
-- [x] Have basic I2C communication between the test master and the
-      main FW
-- [x] Develop the [SMBus](http://smbus.org/specs/smbus20.pdf) write /
-      read commands for the master and slave sides
-- [x] Add extended commands compatible with
-      [PMBus](pmbus.org/Assets/PDFS/Public/PMBus_Specification_Part_II_Rev_1_0_20050328.pdf)
-      to add remote reprogramming capabilities
-- [x] Add (per-command) callback support on command writes and reads
-- [x] Reset over I2C
-- [x] Have remote reprogramming working as part of the main FW
-- [x] Add I2C functionality to the bootloader, move remote
-      reprogramming functionality entirely there
-- [x] Implement SMBus block write and block read commands
-- [x] Refactor the PMBus commands model to make it more practical
-- [x] Add I2C Packet Error Checking (PEC) for robustness (as described
-      in the [SMBus
-      specification](http://smbus.org/specs/smbus20.pdf), pp. 26-27)
-- [x] Implement the PMBus command subset for voltage, current and
-      temperature monitoring
-- [x] Implement the PMBus command subset for fan control and
-      monitoring
-- [x] Add extra radiation fault mitigation measures
-- [ ] . . . ?
+The project documentation can be found under the `doc` directory. the
+MoniMod PCB is located in the `monimod-pcb` directory, and the three
+separate firmware parts are in the `main_fw`, `bootloader` and
+`test_master` directories.